main
Ray
Publish 0.1.0
732bd06
LP6221ASPF
LOWPOWER · DC-DC Converters · SOP-8-EP
LP6221ASPF from LOWPOWER, in a SOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Regulation feedback input; the datasheet states the feedback voltage is 1.16V. |
| 2 | OD | output | Output disconnect control pin: high-impedance when EN is low and pulled down to GND when EN is high, so the external MOS switch can cut off the output in shutdown. |
| 3 | LX | output | Switching pin (boost switch node), tied to pin 4 and driving the inductor. |
| 4 | LX | output | Switching pin (boost switch node), tied to pin 3 and driving the inductor. |
| 5 | GND | power_in | Ground pin, tied to pin 9 and the exposed pad. |
| 6 | OC | passive | Over current protection program pin; a resistor from this pin to GND sets the switch current limit, which the datasheet gives as 10A at 10kΩ falling to 2A at 30kΩ and 6A when floating. |
| 7 | VIN | power_in | Power supply pin; the supply voltage range is 2.6V to 15V. |
| 8 | EN | input | Chip enable pin, active high; the datasheet gives EN input low voltage 0.4V max and EN input high voltage 1.4V min. |
| 9 | GND | power_in | Ground pin and exposed thermal pad (PAD) of the ESOP-8 package, tied to pin 5. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOP-8-EP |
| Category | Power Management ICs |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | 2.6 | 15 | V | 5 | |||
| Output Voltage Range | 20 | V | 5 | ||||
| Supply Current | ICC | 0.15 | mA | VFB=1.5V | 5 | ||
| Shutdown Current | ISD | 1 | uA | VEN=0V | 5 | ||
| Feedback Voltage | VFB | 1.155 | V | 5 | |||
| Feedback Input Current | IFB | 0.1 | uA | VFB=1.5V | 5 | ||
| Switching Frequency | fOSC | 500 | KHz | 5 | |||
| Maximum Duty Cycle | DMAX | 85 | 90 | 95 | % | 5 | |
| EN Input Low Voltage | VEN_L | 0.4 | V | 5 | |||
| EN Input High Voltage | VEN_H | 1.4 | V | 5 | |||
| Switch Current Limit | ILIMIT | 6 | A | VOUT=12V ROC=NC | 5 | ||
| Switch Current Limit | ILIMIT | 10 | A | VOUT=12V ROC=10KΩ | 5 | ||
| Switch Current Limit | ILIMIT | 8 | A | VOUT=12V ROC=12KΩ | 5 | ||
| Switch Current Limit | ILIMIT | 4 | A | VOUT=12V ROC=20KΩ | 5 | ||
| Switch Current Limit | ILIMIT | 2 | A | VOUT=12V ROC=30KΩ | 5 | ||
| MOSFET On Resistance | RDS(ON) | 15 | mΩ | 5 | |||
| Thermal shutdown | TOTP | 150 | ℃ | 5 | |||
| OTP hysteresis | TOTP_HYS | 20 | ℃ | 5 | |||
| VIN to GND | -0.3 | 16 | V | 4 | |||
| SW to GND | -0.3 | 24 | V | 4 | |||
| OC/FB to GND | -0.3 | 6 | V | 4 | |||
| Other Pin to GND | -0.3 | 15 | V | 4 | |||
| Maximum Junction Temperature | 150 | °C | 4 | ||||
| Operating Junction Temperature Range | TJ | -40 | 85 | ℃ | 4 | ||
| Maximum Soldering Temperature (at leads, 10 sec) | 260 | °C | at leads, 10 sec | 4 | |||
| Maximum Power Dissipation | PD | 2 | W | TA=25℃ | 4 | ||
| Thermal Resistance (θJA) | θJA | 46 | ℃/W | 4 |
CAD (KiCad official)
- Symbol:
LP6221ASPF - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
lp6221aspf-etched.step/lp6221aspf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp6221aspf.step/lp6221aspf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LOWPOWER datasheet (7 pp, sha256
35cae6db646244c2, retrieved 2026-11-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LP6221ASPF
**LOWPOWER** · DC-DC Converters · SOP-8-EP
LP6221ASPF from LOWPOWER, in a SOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Regulation feedback input; the datasheet states the feedback voltage is 1.16V. |
| 2 | OD | output | Output disconnect control pin: high-impedance when EN is low and pulled down to GND when EN is high, so the external MOS switch can cut off the output in shutdown. |
| 3 | LX | output | Switching pin (boost switch node), tied to pin 4 and driving the inductor. |
| 4 | LX | output | Switching pin (boost switch node), tied to pin 3 and driving the inductor. |
| 5 | GND | power_in | Ground pin, tied to pin 9 and the exposed pad. |
| 6 | OC | passive | Over current protection program pin; a resistor from this pin to GND sets the switch current limit, which the datasheet gives as 10A at 10kΩ falling to 2A at 30kΩ and 6A when floating. |
| 7 | VIN | power_in | Power supply pin; the supply voltage range is 2.6V to 15V. |
| 8 | EN | input | Chip enable pin, active high; the datasheet gives EN input low voltage 0.4V max and EN input high voltage 1.4V min. |
| 9 | GND | power_in | Ground pin and exposed thermal pad (PAD) of the ESOP-8 package, tied to pin 5. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOP-8-EP |
| Category | Power Management ICs |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | | 2.6 | | 15 | V | | 5 |
| Output Voltage Range | | | | 20 | V | | 5 |
| Supply Current | ICC | | 0.15 | | mA | VFB=1.5V | 5 |
| Shutdown Current | ISD | | 1 | | uA | VEN=0V | 5 |
| Feedback Voltage | VFB | | 1.155 | | V | | 5 |
| Feedback Input Current | IFB | | 0.1 | | uA | VFB=1.5V | 5 |
| Switching Frequency | fOSC | | 500 | | KHz | | 5 |
| Maximum Duty Cycle | DMAX | 85 | 90 | 95 | % | | 5 |
| EN Input Low Voltage | VEN_L | | | 0.4 | V | | 5 |
| EN Input High Voltage | VEN_H | 1.4 | | | V | | 5 |
| Switch Current Limit | ILIMIT | | 6 | | A | VOUT=12V ROC=NC | 5 |
| Switch Current Limit | ILIMIT | | 10 | | A | VOUT=12V ROC=10KΩ | 5 |
| Switch Current Limit | ILIMIT | | 8 | | A | VOUT=12V ROC=12KΩ | 5 |
| Switch Current Limit | ILIMIT | | 4 | | A | VOUT=12V ROC=20KΩ | 5 |
| Switch Current Limit | ILIMIT | | 2 | | A | VOUT=12V ROC=30KΩ | 5 |
| MOSFET On Resistance | RDS(ON) | | 15 | | mΩ | | 5 |
| Thermal shutdown | TOTP | | 150 | | ℃ | | 5 |
| OTP hysteresis | TOTP_HYS | | 20 | | ℃ | | 5 |
| VIN to GND | | -0.3 | | 16 | V | | 4 |
| SW to GND | | -0.3 | | 24 | V | | 4 |
| OC/FB to GND | | -0.3 | | 6 | V | | 4 |
| Other Pin to GND | | -0.3 | | 15 | V | | 4 |
| Maximum Junction Temperature | | | | 150 | °C | | 4 |
| Operating Junction Temperature Range | TJ | -40 | | 85 | ℃ | | 4 |
| Maximum Soldering Temperature (at leads, 10 sec) | | | | 260 | °C | at leads, 10 sec | 4 |
| Maximum Power Dissipation | PD | | | 2 | W | TA=25℃ | 4 |
| Thermal Resistance (θJA) | θJA | | 46 | | ℃/W | | 4 |
## CAD (KiCad official)
- Symbol: `LP6221ASPF`
- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`
- 3D model: SOP-8-EP (KiCad packages3D, STEP)
- 3D model files: `lp6221aspf-etched.step` / `lp6221aspf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp6221aspf.step` / `lp6221aspf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [LOWPOWER datasheet](docs/lp6221aspf-datasheet.pdf) (7 pp, sha256 `35cae6db646244c2`, retrieved 2026-11-10, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lp6221aspf-datasheet.pdf)