by adom
Texas Instruments LP5912-Q1 — AEC-Q100 grade-1 automotive 500-mA low-noise low-IQ LDO, fixed 1.1 V output. 1.6–6.5 V input, 12 µVRMS noise with no bypass capacitor, 75 dB PSRR at 1 kHz, 30 µA typical quiescent current, 170 mV typical dropout at 500 mA, open-drain power good, output auto-discharge and reverse-current protection, –40 to +125 °C junction, 6-pin WSON (DRV) 2.00 × 2.00 mm with exposed thermal pad.
← Commit history
Publish 1.0.1
5 files changed
+16−15
README.md+5−5@@ -1,7 +1,7 @@ # LP5912Q1.1DRVRQ1: Automotive 500 mA Low-Noise LDO, 1.1 V Fixed (TI) **Texas Instruments LP5912-Q1** is an AEC-Q100 grade-1 low-dropout linear regulator that-supplies up to 500 mA with 12 µV<sub>RMS</sub> output noise and 30 µA quiescent current —+supplies up to 500 mA with 12 µV<sub>RMS</sub> output noise and 30 µA quiescent current, no noise-bypass capacitor required. This page is the **1.1 V fixed** option in the 6-pin WSON (DRV) package. @@ -42,7 +42,7 @@ WSON (DRV) package. > **Voltage options.** LP5912-Q1 ships fixed from 0.8 V to 5.5 V; the DRV package covers > 0.9, 1.1, 1.2, 1.5, 1.8, 2.8, 3.0 and 3.3 V as stocked orderables. Every option shares-> this symbol, footprint and 3D — swapping voltage is a BOM change only. Devices ≥ 3.3 V+> this symbol, footprint and 3D, so swapping voltage is a BOM change only. Devices ≥ 3.3 V > tighten to ±2% tolerance and 95 mV typ dropout. ## Pinout@@ -50,12 +50,12 @@ WSON (DRV) package. | Pin | Name | Type | Notes | |---|---|---|---| | 1 | OUT | power out | regulated 1.1 V, 1 µF ceramic to GND |-| 2 | NC | no connect | no internal connection — leave open or tie to GND |+| 2 | NC | no connect | no internal connection; leave open or tie to GND | | 3 | PG | open drain | power good, needs an external pullup | | 4 | EN | input | high = on, low = off; internal 3 MΩ pulldown, 1.3 V on / 0.3 V off threshold | | 5 | GND | power in | ground | | 6 | IN | power in | 1.6 … 6.5 V, 1 µF ceramic to GND |-| 7 | EP | passive | exposed thermal pad — solder to a ground copper area, or leave floating; never to another potential |+| 7 | EP | passive | exposed thermal pad; solder to a ground copper area, or leave floating; never to another potential | ## Files @@ -65,7 +65,7 @@ WSON (DRV) package. - `LP5912Q1_1DRVRQ1.lbr`: EAGLE / Fusion 360 Electronics library (symbol + package + deviceset) - `lp5912q1-1drvrq1.adom-lbr.json`: canonical adom-lbr hub (exports to Altium, KiCad, IntLib) - `docs/LP5912-Q1-datasheet.pdf`: TI SNVSAA8C, revised September 2016-- `docs/symbol.svg`: rendered symbol preview+- `docs/symbol.svg`, `docs/footprint.svg`: rendered symbol and footprint previews - `skills/lp5912q1-1drvrq1-usage/SKILL.md`: how to place, wire and order the part CAD came from the SamacSys bundle (part 717743). The symbol was rebuilt in the Adom house
docs/footprint.svgadded+1@@ -0,0 +1 @@+<svg xmlns="http://www.w3.org/2000/svg" viewBox="-2.600 -2.300 5.200 4.600" preserveAspectRatio="xMidYMid meet"><g class="adom-layer-courtyard"><line x1="-1.600" y1="-1.300" x2="1.600" y2="-1.300" stroke="#FF26E2" stroke-width="0.05" stroke-dasharray="0.2,0.1"/><line x1="1.600" y1="-1.300" x2="1.600" y2="1.300" stroke="#FF26E2" stroke-width="0.05" stroke-dasharray="0.2,0.1"/><line x1="1.600" y1="1.300" x2="-1.600" y2="1.300" stroke="#FF26E2" stroke-width="0.05" stroke-dasharray="0.2,0.1"/><line x1="-1.600" y1="1.300" x2="-1.600" y2="-1.300" stroke="#FF26E2" stroke-width="0.05" stroke-dasharray="0.2,0.1"/></g><g class="adom-layer-fab"><line x1="-1.000" y1="-0.500" x2="-0.500" y2="-1.000" stroke="#6e7681" stroke-width="0.1"/><line x1="-0.500" y1="-1.000" x2="1.000" y2="-1.000" stroke="#6e7681" stroke-width="0.1"/><line x1="1.000" y1="-1.000" x2="1.000" y2="1.000" stroke="#6e7681" stroke-width="0.1"/><line x1="1.000" y1="1.000" x2="-1.000" y2="1.000" stroke="#6e7681" stroke-width="0.1"/><line x1="-1.000" y1="1.000" x2="-1.000" y2="-0.500" stroke="#6e7681" stroke-width="0.1"/></g><g class="adom-layer-copper"><g transform="rotate(-90.000 -1.050 -0.650)" data-pad="1" data-shape="rect" data-size="0.350x0.600" data-mount="smd"><rect x="-1.225" y="-0.950" width="0.350" height="0.600" fill="#C83434" stroke="#ef5350" stroke-width="0.04"/></g><g transform="rotate(-90.000 -1.050 0.000)" data-pad="2" data-shape="rect" data-size="0.350x0.600" data-mount="smd"><rect x="-1.225" y="-0.300" width="0.350" height="0.600" fill="#C83434" stroke="#ef5350" stroke-width="0.04"/></g><g transform="rotate(-90.000 -1.050 0.650)" data-pad="3" data-shape="rect" data-size="0.350x0.600" data-mount="smd"><rect x="-1.225" y="0.350" width="0.350" height="0.600" fill="#C83434" stroke="#ef5350" stroke-width="0.04"/></g><g transform="rotate(-90.000 1.050 0.650)" data-pad="4" data-shape="rect" data-size="0.350x0.600" data-mount="smd"><rect x="0.875" y="0.350" width="0.350" height="0.600" fill="#C83434" stroke="#ef5350" stroke-width="0.04"/></g><g transform="rotate(-90.000 1.050 0.000)" data-pad="5" data-shape="rect" data-size="0.350x0.600" data-mount="smd"><rect x="0.875" y="-0.300" width="0.350" height="0.600" fill="#C83434" stroke="#ef5350" stroke-width="0.04"/></g><g transform="rotate(-90.000 1.050 -0.650)" data-pad="6" data-shape="rect" data-size="0.350x0.600" data-mount="smd"><rect x="0.875" y="-0.950" width="0.350" height="0.600" fill="#C83434" stroke="#ef5350" stroke-width="0.04"/></g><g data-pad="7" data-shape="rect" data-size="1.100x1.700" data-mount="smd"><rect x="-0.550" y="-0.850" width="1.100" height="1.700" fill="#C83434" stroke="#ef5350" stroke-width="0.04"/></g></g><g class="adom-layer-heatsink"></g><g class="adom-layer-drill"></g><g class="adom-layer-silk"><line x1="-0.750" y1="-1.100" x2="0.750" y2="-1.100" stroke="#00cccc" stroke-width="0.12" stroke-linecap="round"/><line x1="-0.750" y1="1.100" x2="0.750" y2="1.100" stroke="#00cccc" stroke-width="0.12" stroke-linecap="round"/><circle cx="-1.350" cy="-1.050" r="0.060" fill="#00cccc" stroke="#00cccc" stroke-width="0.12"/></g><g class="adom-layer-padnum"><text x="-1.050" y="-0.650" text-anchor="middle" dominant-baseline="central" font-size="0.147" fill="#fff" font-family="sans-serif" style="pointer-events:none">1</text><text x="-1.050" y="0.000" text-anchor="middle" dominant-baseline="central" font-size="0.147" fill="#fff" font-family="sans-serif" style="pointer-events:none">2</text><text x="-1.050" y="0.650" text-anchor="middle" dominant-baseline="central" font-size="0.147" fill="#fff" font-family="sans-serif" style="pointer-events:none">3</text><text x="1.050" y="0.650" text-anchor="middle" dominant-baseline="central" font-size="0.147" fill="#fff" font-family="sans-serif" style="pointer-events:none">4</text><text x="1.050" y="0.000" text-anchor="middle" dominant-baseline="central" font-size="0.147" fill="#fff" font-family="sans-serif" style="pointer-events:none">5</text><text x="1.050" y="-0.650" text-anchor="middle" dominant-baseline="central" font-size="0.147" fill="#fff" font-family="sans-serif" style="pointer-events:none">6</text><text x="0.000" y="0.000" text-anchor="middle" dominant-baseline="central" font-size="0.462" fill="#fff" font-family="sans-serif" style="pointer-events:none">7</text></g></svg>
package.json+2−2@@ -2,7 +2,7 @@ "slug": "lp5912q1-1drvrq1", "title": "LP5912Q1.1DRVRQ1 — Automotive 500 mA Low-Noise LDO, 1.1 V (TI)", "type": "component",- "version": "1.0.0",+ "version": "1.0.1", "visibility": "public", "description": "Texas Instruments LP5912-Q1 — AEC-Q100 grade-1 automotive 500-mA low-noise low-IQ LDO, fixed 1.1 V output. 1.6–6.5 V input, 12 µVRMS noise with no bypass capacitor, 75 dB PSRR at 1 kHz, 30 µA typical quiescent current, 170 mV typical dropout at 500 mA, open-drain power good, output auto-discharge and reverse-current protection, –40 to +125 °C junction, 6-pin WSON (DRV) 2.00 × 2.00 mm with exposed thermal pad.", "tags": [@@ -73,8 +73,8 @@ "lp5912q1-1drvrq1.glb", "lp5912q1-1drvrq1.adom-lbr.json", "LP5912Q1_1DRVRQ1.lbr",- "docs/hero.png", "docs/symbol.svg",+ "docs/footprint.svg", "docs/LP5912-Q1-datasheet.pdf", "skills/lp5912q1-1drvrq1-usage/SKILL.md" ]
page.json+2−2@@ -2,7 +2,7 @@ "slug": "lp5912q1-1drvrq1", "title": "LP5912Q1.1DRVRQ1 — Automotive 500 mA Low-Noise LDO, 1.1 V (TI)", "type": "component",- "version": "1.0.0",+ "version": "1.0.1", "visibility": "public", "description": "Texas Instruments LP5912-Q1 — AEC-Q100 grade-1 automotive 500-mA low-noise low-IQ LDO, fixed 1.1 V output. 1.6–6.5 V input, 12 µVRMS noise with no bypass capacitor, 75 dB PSRR at 1 kHz, 30 µA typical quiescent current, 170 mV typical dropout at 500 mA, open-drain power good, output auto-discharge and reverse-current protection, –40 to +125 °C junction, 6-pin WSON (DRV) 2.00 × 2.00 mm with exposed thermal pad.", "tags": [@@ -73,8 +73,8 @@ "lp5912q1-1drvrq1.glb", "lp5912q1-1drvrq1.adom-lbr.json", "LP5912Q1_1DRVRQ1.lbr",- "docs/hero.png", "docs/symbol.svg",+ "docs/footprint.svg", "docs/LP5912-Q1-datasheet.pdf", "skills/lp5912q1-1drvrq1-usage/SKILL.md" ],
skills/lp5912q1-1drvrq1-usage/SKILL.md+6−6@@ -38,7 +38,7 @@ SerDes and PHY core rails, ADC/DAC analog supplies, image-sensor rails. Stability is specified with **1 µF ceramic on IN and 1 µF on OUT**. What matters is the effective capacitance in-circuit: ≥ 0.5 µF must survive DC bias and temperature, so at 1.1 V a 1 µF X7R 0402/0603 is the safe pick. C<sub>OUT</sub> may range 0.7–10 µF with-5–500 mΩ ESR. No noise-bypass capacitor is needed — that is the point of this part.+5–500 mΩ ESR. No noise-bypass capacitor is needed; that is the point of this part. ## Dropout, thermals, and the power budget @@ -49,7 +49,7 @@ must stay above ~1.35 V for a full-current 1.1 V rail. In practice the input is P = (VIN − 1.1 V) × IOUT At 3.3 V in, 300 mA out that is 0.66 W. With R<sub>θJA</sub> = 71.2 °C/W (JEDEC high-K,-two vias under the pad) the junction runs ~47 °C above ambient — fine at 85 °C ambient,+two vias under the pad) the junction runs ~47 °C above ambient: fine at 85 °C ambient, marginal at 105 °C. Feed it from the lowest rail available, and if the drop is large, pre-regulate with a switcher and let the LP5912 clean up the result. @@ -59,11 +59,11 @@ both sides of the board. ## Enable and power good -- **EN** thresholds are 1.3 V (on) and 0.3 V (off) — a 1.8 V or 3.3 V GPIO drives it+- **EN** thresholds are 1.3 V (on) and 0.3 V (off), so a 1.8 V or 3.3 V GPIO drives it directly. Turn-on is ~200 µs to 95% of V<sub>OUT</sub>, with internal soft-start and ≤5% overshoot. When EN goes low, a 100 Ω internal pulldown discharges OUT. - **PG** is open-drain: it releases high once V<sub>OUT</sub> passes 94% of nominal (with a- 140 µs delay) and pulls low below 90%. It cannot source current — without a pullup it+ 140 µs delay) and pulls low below 90%. It cannot source current, so without a pullup it reads as a floating input, not a logic high. Sequence downstream rails off this pin instead of guessing a delay. @@ -75,14 +75,14 @@ both sides of the board. substrate; connect it to ground or leave it floating, never to VIN or VOUT. 3. **Small package.** 2.00 × 2.00 mm body, 0.65 mm pitch, 0.35 × 0.60 mm pads on a 2.10 mm span, courtyard 3.20 × 2.60 mm. TI's example stencil is ~88% paste coverage on the- exposed pad — if your assembler prints 100%, expect float on reflow.+ exposed pad. If your assembler prints 100%, expect float on reflow. 4. **Keep OUT quiet.** Do not run the 1.1 V rail under a switcher inductor; the low noise figure is a property of the part, not of the copper around it. ## Picking another voltage The DRV package is stocked at 0.9, 1.1, 1.2, 1.5, 1.8, 2.8, 3.0 and 3.3 V; the family-covers 0.8–5.5 V in 25 mV steps to order. **Same symbol, same footprint, same 3D** — swap+covers 0.8–5.5 V in 25 mV steps to order. **Same symbol, same footprint, same 3D**, so swap the MPN in the BOM only. Options ≥ 3.3 V tighten to ±2% and 95 mV typ dropout; this 1.1 V option is ±3%.