main
Ray lp5912-3-3drvr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 1974090
{
  "schema_version": 1,
  "type": "component",
  "slug": "lp5912-3-3drvr",
  "title": "LP5912-3.3DRVR",
  "brief": "Texas Instruments LP5912 3 3DRVR Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, WSON-6-EP(2x2). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.2.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "pmic",
    "lp5912-3.3drvr"
  ],
  "component": {
    "mpn": "LP5912-3.3DRVR",
    "manufacturer": "Texas Instruments LP5912 3 3DRVR",
    "package": "WSON-6-EP(2x2)",
    "pin_count": 7,
    "category": "PMIC",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lp5912-3.3drvr.pdf",
    "parts": {
      "symbol": "lp5912-3-3drvr.kicad_sym",
      "footprint": "lp5912-3-3drvr.kicad_mod",
      "model_3d": "lp5912-3-3drvr-etched.glb",
      "model_3d_plain": "lp5912-3-3drvr.glb",
      "model_3d_step": "lp5912-3-3drvr-etched.step",
      "model_3d_step_plain": "lp5912-3-3drvr.step",
      "lbr": "lp5912-3-3drvr.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "power_out",
        "description": "Regulated 3.3-V output voltage. Supplies up to 500 mA of load current. Requires a 1-µF ceramic output capacitor for stability."
      },
      {
        "number": "2",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection. Leave open, or connect to ground."
      },
      {
        "number": "3",
        "name": "PG",
        "type": "output",
        "description": "Power-good indicator (open-drain). Requires an external pullup resistor. Asserts high once V_OUT is within regulation after a typical 140-µs delay. Rated up to 6.5 V."
      },
      {
        "number": "4",
        "name": "EN",
        "type": "input",
        "description": "Enable input. Logic high turns the device ON; logic low turns it OFF. Contains an internal 3-MΩ pulldown. Absolute max 7 V."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground reference. All voltages are with respect to this pin."
      },
      {
        "number": "6",
        "name": "IN",
        "type": "power_in",
        "description": "Unregulated input voltage. Operating range 1.6 V to 6.5 V (must be ≥ V_OUT + 0.5 V or 1.6 V, whichever is greater). Requires a 1-µF ceramic input capacitor."
      },
      {
        "number": "PAD",
        "name": "EP",
        "type": "passive",
        "description": "Exposed thermal pad. Connect to a copper area (with thermal vias to inner layers) to improve thermal performance. Connect to ground or leave floating; do not connect to any potential other than ground."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/lp5912-3.3drvr.pdf",
        "pages": 36,
        "sha256": "a34beb53ff37def2",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 7,
        "described": 7,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lp5912-3-3drvr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2,
          1.98,
          0.82
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "a159a524ab16d3406353a16f8c20b59f5679eea26e2d41174628288b5b9da702",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lp5912-3-3drvr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2,
          1.98,
          0.82
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "ada8ab9079e467daeef3ea10a08d44e9228057c5e0b5d953e29dbb8fc133913b",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "WSON-6-EP(2x2)",
      "Category": "PMIC",
      "Pins": "7"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lp5912-3.3drvr"
  ],
  "discovery_pitch": "LP5912-3.3DRVR (Texas Instruments LP5912 3 3DRVR) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lp5912-3-3drvr.kicad_sym",
    "lp5912-3-3drvr.kicad_mod",
    "lp5912-3-3drvr.glb",
    "lp5912-3-3drvr.step",
    "lp5912-3-3drvr-etched.step",
    "lp5912-3-3drvr.lbr",
    "docs/hero.png",
    "docs/lp5912-3-3drvr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "variants": [
    {
      "mpn": "LP5912-3.3DRVR",
      "kind": "packaging"
    },
    {
      "mpn": "LP5912-3.3DRVRDRVT",
      "kind": "packaging"
    }
  ],
  "updated_at": "2026-09-28T18:00:21.812Z"
}