component
LP5912-1.8DRVR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, WSON-6-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLP5912-1.8DRVR
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · WSON-6-EP(2x2)
LP5912-1.8DRVR from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Regulated output voltage with output range 0.8V to 5.5V. |
| 2 | NC | unconnected | No internal connection; leave open or connect to ground. |
| 3 | PG | tri_state | Power-good open-drain output indicator requiring external pullup resistor. |
| 4 | EN | input | Enable input with internal 3-MΩ pulldown; logic high enables device, logic low disables device. |
| 5 | GND | power_in | Ground reference. |
| 6 | IN | power_in | Unregulated input supply voltage with operating range 1.6V to 6.5V. |
| 7 | Thermal Pad | passive | Exposed thermal pad for heat dissipation; connect to ground with thermal vias to inner PCB layers or leave floating, but do not connect to any other potential. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-6-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 7 |
CAD (KiCad official)
- Symbol:
LP5912-1.8DRVR - Footprint:
Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm - 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
lp5912-1-8drvr-etched.step/lp5912-1-8drvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp5912-1-8drvr.step/lp5912-1-8drvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
e99dfbc671457905, retrieved 2026-09-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).