main
Ray
Publish 0.1.0
fc9cb48
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229
{
"slug": "lp5912-1-0drvr",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, WSON-6-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management (pmic)",
"lp5912-1.0drvr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lp5912-1-0drvr.kicad_sym",
"lp5912-1-0drvr.kicad_mod",
"lp5912-1-0drvr.glb",
"lp5912-1-0drvr.step",
"lp5912-1-0drvr.lbr",
"docs/hero.png",
"docs/lp5912-1-0drvr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lp5912-1-0drvr-hero.glb",
"lp5912-1-0drvr-hero.overlay.json",
"lp5912-1-0drvr-etched.glb"
],
"component": {
"mpn": "LP5912-1.0DRVR",
"manufacturer": "Texas Instruments",
"package": "WSON-6-EP(2x2)",
"pin_count": 7,
"category": "Power Management (PMIC)",
"subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
"datasheet": "https://www.ti.com/lit/ds/symlink/lp5912.pdf",
"parts": {
"symbol": "lp5912-1-0drvr.kicad_sym",
"footprint": "lp5912-1-0drvr.kicad_mod",
"model_3d": "lp5912-1-0drvr-hero.glb",
"model_3d_plain": "lp5912-1-0drvr-etched.glb",
"model_3d_step": "lp5912-1-0drvr-etched.step",
"model_3d_step_plain": "lp5912-1-0drvr.step",
"lbr": "lp5912-1-0drvr.lbr"
},
"distributor_links": {
"lcsc": "C2872079",
"mouser": "595-LP5912-1.0DRVR"
},
"distributor_check": {
"checked_at": "2026-11-10T09:17:44Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "deferred",
"error": "shared DigiKey quota guard: 939 calls left today"
},
"mouser": {
"pn": "595-LP5912-1.0DRVR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "OUT",
"type": "power_out",
"description": "Regulated output voltage, adjustable only by fixed factory option from 0.8 V to 5.5 V and rated for up to 500 mA of output current."
},
{
"number": "2",
"name": "NC",
"type": "unconnected",
"description": "No internal connection; leave open or connect to ground."
},
{
"number": "3",
"name": "PG",
"type": "output",
"description": "Power-good indicator that requires an external pullup (10 kΩ to 100 kΩ recommended); absolute maximum OFF-state voltage is 7 V."
},
{
"number": "4",
"name": "EN",
"type": "input",
"description": "Enable input: logic high turns the device on and logic low turns it off, with an internal 3-MΩ pulldown to GND; VEN must stay between 0 V and VIN in operation and is rated to 7 V absolute maximum."
},
{
"number": "5",
"name": "GND",
"type": "power_in",
"description": "Ground reference for the device; all voltages are referenced to this pin."
},
{
"number": "6",
"name": "IN",
"type": "power_in",
"description": "Unregulated input voltage, operating from 1.6 V to 6.5 V and to be at least VOUT + 0.5 V for regulation; a minimum 1 µF capacitor must be placed within 1 cm of this pin."
},
{
"number": "7",
"name": "Thermal Pad",
"type": "passive",
"description": "Exposed thermal pad to be connected to ground or left floating, and must not be connected to any potential other than ground."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet pin table lists the exposed thermal pad with no number; pin number 7 is taken from the; The OUT pin description states the output range 0.8 V to 5.5 V in 25-mV fixed steps set by the volta; The datasheet says PG requires an external pullup but does not explicitly label it open-drain in the"
],
"pages_sent": 38,
"cost_usd": 0.1691,
"at": "2026-11-10T09:17:32"
},
"datasheet": {
"url": "https://www.ti.com/lit/ds/symlink/lp5912.pdf",
"pages": 38,
"sha256": "de84246f830e2a08",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 7,
"described": 7,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lp5912-1-0drvr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.0,
1.98,
0.82
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "a159a524ab16d3406353a16f8c20b59f5679eea26e2d41174628288b5b9da702",
"checked": "2026-11-10",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lp5912-1-0drvr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.0,
1.98,
0.82
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "8d80d75a965526add5b00c53e84a851aaa578330f6db3dbf17ca0cac67ed5e2f",
"checked": "2026-11-10",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "DRV0006A",
"source_page": 35,
"D": {
"nom_mm": 2.0,
"range_mm": [
1.9,
2.1
]
},
"E1": {
"nom_mm": 2.0,
"range_mm": [
1.9,
2.1
]
},
"e": {
"nom_mm": 0.65,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 0.75,
"range_mm": [
0.7,
0.8
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "lp5912-1-0drvr.step",
"verdict": "PASS",
"reasons": [
"height within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}