main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lp5907qmfx-3-0q1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lp5907qmfx-3-0q1: viewers · Ray
lp5907qmfx-3-0q1-etched.fit.json lp5907qmfx-3-0q1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lp5907qmfx-3-0q1-etched.glb lp5907qmfx-3-0q1: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC… · Ray
lp5907qmfx-3-0q1-etched.step lp5907qmfx-3-0q1: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC… · Ray
lp5907qmfx-3-0q1-hero.glb lp5907qmfx-3-0q1: hero from the plain model · Ray
lp5907qmfx-3-0q1-hero.overlay.json lp5907qmfx-3-0q1: hero from the plain model · Ray
lp5907qmfx-3-0q1.glb Publish 0.1.0 · Ray
lp5907qmfx-3-0q1.kicad_mod Publish 0.1.0 · Ray
lp5907qmfx-3-0q1.kicad_sym Publish 0.1.0 · Ray
lp5907qmfx-3-0q1.lbr Publish 0.1.0 · Ray
lp5907qmfx-3-0q1.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md lp5907qmfx-3-0q1: specified limits as data (metadata.characteristics, 27 rows from the datasheet) · Ray

LP5907QMFX-3.0Q1

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

LP5907QMFX-3.0Q1 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input voltage supply for regulated 250mA output, operating range 2.2V to 5.5V, requires minimum 1µF input capacitor.
2 GND power_in Common ground reference for all pins.
3 EN input Enable logic input; device enabled when voltage > 1.2V (VIH), disabled when voltage < 0.4V (VIL), with internal 1MΩ pulldown resistor holding device off by default.
4 N/C unconnected No internal electrical connection.
5 OUT output Regulated output voltage (3.0V fixed for this MPN variant) with 250mA source capability, internal 230Ω pulldown resistor discharges output through this pin when device is disabled, requires minimum 1µF low-ESR output capacitor.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN -0.3 6 V 4
Output voltage VOUT -0.3 V 4
Enable input voltage VEN -0.3 6 V 4
Junction temperature TJMAX 150 °C 4
Storage temperature Tstg -65 150 °C 4
Input supply voltage VIN 2.2 5.5 V 4
Enable input voltage VEN 0 5.5 V 4
Output current IOUT 0 250 mA 4
Operating junction temperature TJ-MAX-OP -40 125 °C 4
Input voltage VIN 2.2 5.5 V TA = 25°C 5
Output voltage tolerance ΔVOUT -2 2 %VOUT VIN = (VOUT(NOM) + 1 V) to 5.5 V, IOUT = 1 mA to 250 mA, VOUT ≥ 1.8 V 5
Output load current ILOAD 0 250 mA 5
Quiescent current IQ 12 25 µA VEN = 1.2 V, IOUT = 0 mA 5
Quiescent current IQ 250 425 µA VEN = 1.2 V, IOUT = 250 mA 5
Quiescent current (disabled) IQ 0.2 1 µA VEN = 0.3 V (Disabled) 5
Line transient ΔVOUT -1 mV VIN = (VOUT(NOM) + 1 V) to (VOUT(NOM) + 1.6 V) in 30 µs 6
Line transient ΔVOUT 1 mV VIN = (VOUT(NOM) + 1.6 V) to (VOUT(NOM) + 1.6 V) in 30 µs 6
Load transient ΔVOUT -40 mV IOUT = 1 mA to 250 mA in 10 µs 6
Load transient ΔVOUT 40 mV IOUT = 250 mA to 1 mA in 10 µs 6
Turn-on time tON 80 150 µs From VEN > VIH to VOUT = 95% of VOUT(NOM), TA = 25°C 6
Output capacitance COUT 0.7 1 10 µF 6
Output/input capacitor ESR ESR 5 500 mΩ 6
Junction-to-ambient thermal resistance (DBV, SOT-23) RθJA 186.9 °C/W DBV (SOT-23) 5-pin package 4
Junction-to-case (top) thermal resistance (DBV, SOT-23) RθJC(top) 112.3 °C/W DBV (SOT-23) 5-pin package 4
Junction-to-board thermal resistance (DBV, SOT-23) RθJB 52.3 °C/W DBV (SOT-23) 5-pin package 4
Junction-to-top characterization parameter (DBV, SOT-23) ψJT 27.5 °C/W DBV (SOT-23) 5-pin package 4
Junction-to-board characterization parameter (DBV, SOT-23) ψJB 51.8 °C/W DBV (SOT-23) 5-pin package 4

CAD (KiCad official)

  • Symbol: LP5907QMFX-3.0Q1
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: lp5907qmfx-3-0q1-etched.step / lp5907qmfx-3-0q1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp5907qmfx-3-0q1.step / lp5907qmfx-3-0q1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (33 pp, sha256 027c095aebe0b6af, retrieved 2026-09-26, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF