main
Ray
lp5907mfx-4-5: laser-etched CAD + chip hero (factory 2.0.0 backfill)
f082f66
LP5907MFX-4.5
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
LP5907MFX-4.5 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input voltage supply, 2.2 V to 5.5 V (recommended). Connect a 1-µF ceramic capacitor from this pin to GND close to the device. |
| 2 | GND | power_in | Common ground reference. All voltages are referenced to this pin. |
| 3 | EN | input | Enable input. A low voltage (<VIL) turns the regulator off and discharges VOUT through an internal 230-Ω pulldown. A high voltage (>VIH) enables the regulator. Has an internal 1-MΩ pulldown that holds the regulator off by default; VEN range 0 V to 5.5 V. |
| 4 | NC | unconnected | No internal electrical connection. May be left floating or tied to GND. |
| 5 | OUT | power_out | Regulated 4.5-V output, up to 250 mA. Connect a minimum 1-µF low-ESR ceramic capacitor from this pin to GND. An internal 230-Ω (typical) pulldown discharges VOUT when the regulator is in shutdown (EN low). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
LP5907MFX-4.5LP5907MFX-4.5DBVLP5907MFX-4.5DQNLP5907MFX-4.5YKELP5907MFX-4.5YKM
CAD (KiCad official)
- Symbol:
LP5907MFX-4.5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lp5907mfx-4-5-etched.step/lp5907mfx-4-5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp5907mfx-4-5.step/lp5907mfx-4-5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (46 pp, sha256
1f64e93fd403dc55, retrieved 2026-08-17, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LP5907MFX-4.5
**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
LP5907MFX-4.5 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input voltage supply, 2.2 V to 5.5 V (recommended). Connect a 1-µF ceramic capacitor from this pin to GND close to the device. |
| 2 | GND | power_in | Common ground reference. All voltages are referenced to this pin. |
| 3 | EN | input | Enable input. A low voltage (<VIL) turns the regulator off and discharges VOUT through an internal 230-Ω pulldown. A high voltage (>VIH) enables the regulator. Has an internal 1-MΩ pulldown that holds the regulator off by default; VEN range 0 V to 5.5 V. |
| 4 | NC | unconnected | No internal electrical connection. May be left floating or tied to GND. |
| 5 | OUT | power_out | Regulated 4.5-V output, up to 250 mA. Connect a minimum 1-µF low-ESR ceramic capacitor from this pin to GND. An internal 230-Ω (typical) pulldown discharges VOUT when the regulator is in shutdown (EN low). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
## Ordering variants
Same part, different packaging or reel option.
- `LP5907MFX-4.5`
- `LP5907MFX-4.5DBV`
- `LP5907MFX-4.5DQN`
- `LP5907MFX-4.5YKE`
- `LP5907MFX-4.5YKM`
## CAD (KiCad official)
- Symbol: `LP5907MFX-4.5`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `lp5907mfx-4-5-etched.step` / `lp5907mfx-4-5-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp5907mfx-4-5.step` / `lp5907mfx-4-5.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lp5907mfx-4.5.pdf) (46 pp, sha256 `1f64e93fd403dc55`, retrieved 2026-08-17, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lp5907mfx-4-5-datasheet.pdf)