Generated by kicad-footprint-generator · KiCad file format 20260206
LP5868TRKPR
TI(德州仪器) · Others · VQFN-40(5x5)
LP5868TRKPR from TI(德州仪器), in a VQFN-40(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS0 | output | Current sink 0; must be left floating if not used. |
| 2 | CS1 | output | Current sink 1; must be left floating if not used. |
| 3 | CS2 | output | Current sink 2; must be left floating if not used. |
| 4 | CS3 | output | Current sink 3; must be left floating if not used. |
| 5 | CS4 | output | Current sink 4; must be left floating if not used. |
| 6 | CS5 | output | Current sink 5; must be left floating if not used. |
| 7 | CS6 | output | Current sink 6; must be left floating if not used. |
| 8 | CS7 | output | Current sink 7; must be left floating if not used. |
| 9 | CS8 | output | Current sink 8; must be left floating if not used. |
| 10 | SW0 | output | High-side PMOS switch output for scan line 0; must be left floating if not used. |
| 11 | SW1 | output | High-side PMOS switch output for scan line 1; must be left floating if not used. |
| 12 | SW2 | output | High-side PMOS switch output for scan line 2; must be left floating if not used. |
| 13 | SW3 | output | High-side PMOS switch output for scan line 3; must be left floating if not used. |
| 14 | SW4 | output | High-side PMOS switch output for scan line 4; must be left floating if not used. |
| 15 | SW5 | output | High-side PMOS switch output for scan line 5; must be left floating if not used. |
| 16 | VLED | power_in | Power input for the high-side switches, 2.7V to 5.5V recommended. |
| 17 | SW6 | output | High-side PMOS switch output for scan line 6; must be left floating if not used. |
| 18 | SW7 | output | High-side PMOS switch output for scan line 7; must be left floating if not used. |
| 19 | NC | unconnected | No connection. |
| 20 | NC | unconnected | No connection. |
| 21 | NC | unconnected | No connection. |
| 22 | CS9 | output | Current sink 9; must be left floating if not used. |
| 23 | CS10 | output | Current sink 10; must be left floating if not used. |
| 24 | CS11 | output | Current sink 11; must be left floating if not used. |
| 25 | CS12 | output | Current sink 12; must be left floating if not used. |
| 26 | CS13 | output | Current sink 13; must be left floating if not used. |
| 27 | CS14 | output | Current sink 14; must be left floating if not used. |
| 28 | CS15 | output | Current sink 15; must be left floating if not used. |
| 29 | CS16 | output | Current sink 16; must be left floating if not used. |
| 30 | CS17 | output | Current sink 17; must be left floating if not used. |
| 31 | AGND | power_in | Analog ground; must be connected to the exposed thermal pad and the common ground plane. |
| 32 | VCAP | power_out | Internal LDO output; a 1μF capacitor must be connected between this pin and GND, placed as close to the device as possible. |
| 33 | IFS | input | Interface type select: I2C when low, SPI when high; a resistor must be connected between VIO and this pin. |
| 34 | VSYNC | input | External synchronize signal for display mode 2 and mode 3. |
| 35 | SCL_SCLK | input | I2C clock input or SPI clock input; pull up to VIO when configured as I2C. |
| 36 | SDA_MOSI | bidirectional | I2C data input or SPI leader output follower input; pull up to VIO when configured as I2C. |
| 37 | ADDR0_MISO | bidirectional | I2C address select 0 or SPI leader input follower output. |
| 38 | ADDR1_SS | input | I2C address select 1 or SPI follower select. |
| 39 | VIO_EN | power_in | Power supply for digital circuits and chip enable (1.65V to 5.5V); a 1nF capacitor must be connected between this pin and GND, placed as close to the device as possible. |
| 40 | VCC | power_in | Power supply for the device, 2.7V to 5.5V; a 1μF capacitor must be connected between this pin and GND, placed as close to the device as possible. |
| 41 | GND | power_in | Exposed thermal pad; must be connected to AGND and the common ground plane. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TI(德州仪器) |
| Package | VQFN-40(5x5) |
| Category | Others |
| Pins | 41 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Device supply voltage | VCC | 2.7 | 5.5 | V | 7 | ||
| Undervoltage restart | VUVR | 2.5 | V | VCC rising, Test mode | 7 | ||
| Undervoltage shutdown | VUVF | 1.9 | V | VCC falling, Test mode | 7 | ||
| Undervoltage shutdown hysteresis | VUV_HYS | 0.3 | V | 7 | |||
| Internal LDO output | VCAP | 1.78 | V | VCC = 2.7V to 5.5V | 7 | ||
| Shutdown supply current | ISHUTDOWN | 0.1 | 1.5 | µA | VEN = 0, CHIP_EN = 0 (bit), ADDx = 0; measure the total current from VCC and VLED | 7 | |
| Standby supply current | ISTANDBY | 5.5 | 12 | µA | VEN = 3.3V, CHIP_EN = 0 (bit), measure the total current from VCC and VLED | 7 | |
| Active mode supply current | INORMAL | 4.3 | 6 | mA | VEN = 3.3V, CHIP_EN = 1 (bit), all channels IOUT = 12.5 mA (MC = 1, CC = 127, DC = 256), measure the current from VCC | 7 | |
| LED supply voltage | VLED | 2.7 | 5.5 | V | 7 | ||
| VIO supply voltage | VVIO | 1.65 | 5.5 | V | 7 | ||
| VIO supply current | IVIO | 5 | µA | Interface idle | 7 | ||
| Constant current sink output range (CS0, CS17) | ICS | 0.1 | 75 | mA | 2.7 <= VCC < 3.3V, PWM = 100% | 7 | |
| Constant current sink output range (CS0, CS17) | ICS | 0.1 | 100 | mA | VCC >= 3.3V PWM = 100% | 7 | |
| Leakage current (CS0, CS17) | ILKG | 0.1 | 1 | µA | channels off, up_deghost = 0, VCS=5V | 7 | |
| Device to device current error | IERR_DD | -5 | 5 | % | All channels ON. Current set to 1 mA. MC = 0 CC = 17 DC = 255 PWM = 100% | 7 | |
| Channel to channel current error | IERR_CC | -5 | 5 | % | All channels ON. Current set to 1 mA. MC = 0 CC = 17 DC = 255 PWM = 100% | 7 | |
| LED PWM frequency | fPWM | 62.5 | KHz | PWM_Fre = 1, PWM = 100% | 7 | ||
| LED PWM frequency | fPWM | 125 | KHz | PWM_Fre = 0, PWM = 100% | 7 | ||
| Output saturation voltage | VSAT | 0.7 | V | IOUT = 100mA, decreasing output voltage, when the LED current has dropped 5% (only apply to LP5860TRKPR, LP5866TRKPR and LP5868TRKPR) | 8 | ||
| Output saturation voltage | VSAT | 0.6 | V | IOUT = 75mA, decreasing output voltage, when the LED current has dropped 5% | 8 | ||
| Output saturation voltage | VSAT | 0.5 | V | IOUT = 25mA, decreasing output voltage, when the LED current has dropped 5% | 8 | ||
| High-side PMOS ON resistance | RSW | 450 | mΩ | VLED = 2.7 V, ISW = 200 mA | 8 | ||
| High-side PMOS ON resistance | RSW | 380 | mΩ | VLED = 3.8 V, ISW = 200mA | 8 | ||
| High-side PMOS ON resistance | RSW | 310 | mΩ | VLED = 5 V, ISW = 200 mA | 8 | ||
| Low-level input voltage of EN | VEN_IL | 0.4 | V | 8 | |||
| High-level input voltage of EN | VEN_IH | 1.4 | V | When VCAP powered up | 8 | ||
| Input current, SDA, SCL, SCLK, MOSI, SS, ADDRx | ILOGIC_I | -1 | 1 | µA | 8 | ||
| Low-level output voltage, SDA, MISO | VLOGIC_OL | 0.4 | V | IPULLUP = 3 mA | 8 | ||
| Thershold for channel open detection | VLOD_TH | 0.25 | V | 8 | |||
| Thermal-shutdown junction temperature | TTSD | 150 | °C | 8 | |||
| Thermal shutdown temperature hysteresis | THYS | 15 | °C | 8 | |||
| Internal oscillator frequency | fOSC | 31.2 | MHz | 8 | |||
| Device to device oscillator frequency error | fOSC_ERR | -3 | 3 | % | 8 | ||
| Wait time from UVLO disactive to device NORMAL | tPOR_H | 500 | µs | 8 | |||
| Wait time from setting Chip_EN (Register) =1 to device NORMAL | tCHIP_EN | 100 | µs | 8 | |||
| LED output rise time | tRISE | 10 | ns | 8 | |||
| Input voltage on VCC (supply voltage) | VCC | 2.7 | 5.5 | V | 6 | ||
| Input voltage on VIO_EN | VIO_EN | 1.65 | 5.5 | V | 6 | ||
| Operating ambient temperature | TA | -40 | 85 | °C | 6 | ||
| Voltage on VCC / VLED / VIO / EN / CS / SW / SDA / SCL / SCLK / MOSI / MISO / SS / ADDR0 / ADDR1 / VSYNC / IFS | -0.3 | 6 | V | 6 | |||
| Voltage on VCAP | -0.3 | 2 | V | 6 | |||
| Junction temperature | TJ | -55 | 150 | °C | 6 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| Junction-to-ambient thermal resistance | RθJA | 31.4 | °C/W | 6 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 22.9 | °C/W | 6 | |||
| Junction-to-board thermal resistance | RθJB | 12 | °C/W | 6 | |||
| Junction-to-top characterization parameter | ΨJT | 0.3 | °C/W | 6 | |||
| Junction-to-board characterization parameter | ΨJB | 12 | °C/W | 6 | |||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 3.5 | °C/W | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | chip as possible. GND plane connections to CVLED and GND pins must be on TOP layer copper with multiple | 49 |
CAD (KiCad official)
- Symbol:
LP5868TRKPR - Footprint:
Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm - 3D model: VQFN-40(5x5) (KiCad packages3D, STEP)
- 3D model files:
lp5868trkpr-etched.step/lp5868trkpr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp5868trkpr.step/lp5868trkpr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TI(德州仪器) datasheet (60 pp, sha256
a71ac27e262963a0, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).