3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLP5866RKPR
Texas Instruments · LED Drivers · VQFN-40(5x5)
LP5866RKPR from Texas Instruments, in a VQFN-40(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS0 | output | Current sink 0. If not used, this pin must be left floating. |
| 2 | CS1 | output | Current sink 1. If not used, this pin must be left floating. |
| 3 | CS2 | output | Current sink 2. If not used, this pin must be left floating. |
| 4 | CS3 | output | Current sink 3. If not used, this pin must be left floating. |
| 5 | CS4 | output | Current sink 4. If not used, this pin must be left floating. |
| 6 | CS5 | output | Current sink 5. If not used, this pin must be left floating. |
| 7 | CS6 | output | Current sink 6. If not used, this pin must be left floating. |
| 8 | CS7 | output | Current sink 7. If not used, this pin must be left floating. |
| 9 | CS8 | output | Current sink 8. If not used, this pin must be left floating. |
| 10 | SW0 | output | High-side PMOS switch output for scan line 0. If not used, this pin must be left floating. |
| 11 | SW1 | output | High-side PMOS switch output for scan line 1. If not used, this pin must be left floating. |
| 12 | SW2 | output | High-side PMOS switch output for scan line 2. If not used, this pin must be left floating. |
| 13 | SW3 | output | High-side PMOS switch output for scan line 3. If not used, this pin must be left floating. |
| 14 | SW4 | output | High-side PMOS switch output for scan line 4. If not used, this pin must be left floating. |
| 15 | SW5 | output | High-side PMOS switch output for scan line 5. If not used, this pin must be left floating. |
| 16 | VLED | power_in | Power input for high-side switches. |
| 17 | NC | unconnected | No internal connection. |
| 18 | NC | unconnected | No internal connection. |
| 19 | NC | unconnected | No internal connection. |
| 20 | NC | unconnected | No internal connection. |
| 21 | NC | unconnected | No internal connection. |
| 22 | CS9 | output | Current sink 9. If not used, this pin must be left floating. |
| 23 | CS10 | output | Current sink 10. If not used, this pin must be left floating. |
| 24 | CS11 | output | Current sink 11. If not used, this pin must be left floating. |
| 25 | CS12 | output | Current sink 12. If not used, this pin must be left floating. |
| 26 | CS13 | output | Current sink 13. If not used, this pin must be left floating. |
| 27 | CS14 | output | Current sink 14. If not used, this pin must be left floating. |
| 28 | CS15 | output | Current sink 15. If not used, this pin must be left floating. |
| 29 | CS16 | output | Current sink 16. If not used, this pin must be left floating. |
| 30 | CS17 | output | Current sink 17. If not used, this pin must be left floating. |
| 31 | AGND | power_in | Analog ground. Must be connected to exposed thermal pad and common ground plane. |
| 32 | VCAP | power_out | Internal LDO output; a 1-μF capacitor must be connected between this pin and GND, placed as close to the device as possible. |
| 33 | IFS | input | Interface type select: I2C is selected when IFS is low and SPI is selected when IFS is high; a resistor must be connected between VIO and this pin. |
| 34 | VSYNC | input | External synchronize signal for display mode 2 and mode 3. |
| 35 | SCL_SCLK | input | I2C clock input or SPI clock input; pull up to VIO when configured as I2C. |
| 36 | SDA_MOSI | bidirectional | I2C data or SPI leader output follower input; pull up to VIO when configured as I2C. |
| 37 | ADDR0_MISO | bidirectional | I2C address select 0 or SPI leader input follower output. |
| 38 | ADDR1_SS | input | I2C address select 1 or SPI follower select. |
| 39 | VIO_EN | power_in | Power supply for digital circuits and chip enable; a 1-nF capacitor must be connected between this pin and GND, placed as close to the device as possible. |
| 40 | VCC | power_in | Power supply for device; a 1-μF capacitor must be connected between this pin and GND, placed as close to the device as possible. |
| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-40(5x5) |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 41 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage on VCC / VLED / VIO / EN / CS / SW / SDA / SCL / SCLK / MOSI / MISO / SS / ADDR0 / ADDR1 / VSYNC / IFS | -0.3 | 6 | V | 7 | |||
| Voltage on VCAP | -0.3 | 2 | V | 7 | |||
| Junction temperature | TJ | -55 | 150 | °C | 7 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 7 | ||
| Input voltage on VCC (supply voltage) | 2.7 | 5.5 | V | 7 | |||
| Input voltage on VLED (LED supply voltage) | 2.7 | 5.5 | V | 7 | |||
| Input voltage on VIO_EN | 1.65 | 5.5 | V | 7 | |||
| Operating ambient temperature TA (LP5866, not LP5866MDBT) | TA | -40 | 85 | °C | 7 | ||
| Junction-to-ambient thermal resistance (VQFN RKP) | RθJA | 31.4 | °C/W | 7 | |||
| Junction-to-case (top) thermal resistance (VQFN RKP) | RθJC(top) | 22.9 | °C/W | 7 | |||
| Junction-to-board thermal resistance (VQFN RKP) | RθJB | 12 | °C/W | 7 | |||
| Junction-to-top characterization parameter (VQFN RKP) | ΨJT | 0.3 | °C/W | 7 | |||
| Junction-to-board characterization parameter (VQFN RKP) | ΨJB | 12 | °C/W | 7 | |||
| Junction-to-case (bottom) thermal resistance (VQFN RKP) | RθJC(bot) | 3.5 | °C/W | 7 | |||
| Device supply voltage VCC | VCC | 2.7 | 5.5 | V | 8 | ||
| VLED LED supply voltage | VLED | 2.7 | 5.5 | V | 8 | ||
| VIO supply voltage | VVIO | 1.65 | 5.5 | V | 8 | ||
| Shutdown supply current | ISHUTDOWN | 0.1 | 1 | µA | VEN = 0 V, CHIP_EN = 0 (bit), measure the total current from VCC and VLED | 8 | |
| Standby supply current | ISTANDBY | 5.5 | 10 | µA | VEN = 3.3 V, CHIP_EN = 0 (bit), measure the total current from VCC and VLED | 8 | |
| Active mode supply current | INORMAL | 4.3 | 6 | mA | VEN = 3.3 V, CHIP_EN = 1 (bit), all channels IOUT = 5 mA (MC = 1, CC = 127, DC = 256), measure the current from VCC | 8 | |
| Constant current sink output range (CS0, CS17) | ICS | 0.1 | 40 | mA | 2.7 <= VCC < 3.3 V, PWM = 100% | 8 | |
| Constant current sink output range (CS0, CS17) | ICS | 0.1 | 50 | mA | VCC >= 3.3 V PWM = 100% | 8 | |
| Leakage current (CS0, CS17) | ILKG | 0.1 | 1 | µA | channels off, up_deghost = 0, VCS = 5 V | 8 | |
| Device to device current error, IERR_DD = (IAVE - ISET) / ISET × 100% | IERR_DD | -7 | 7 | % | All channels ON. Current set to 0.1 mA. MC = 0 CC = 42 DC = 25 PWM = 100% | 8 | |
| Device to device current error, IERR_DD = (IAVE - ISET) / ISET × 100% | IERR_DD | -5 | 5 | % | All channels ON. Current set to 1 mA. MC = 2 CC = 127 DC = 25 PWM = 100% | 8 | |
| Device to device current error, IERR_DD = (IAVE - ISET) / ISET × 100% | IERR_DD | -3.5 | 3.5 | % | All channels ON. Current set to 10 mA. MC = 2 CC = 127 DC = 255 PWM = 100% | 8 | |
| Device to device current error, IERR_DD = (IAVE - ISET) / ISET × 100% | IERR_DD | -3 | 3 | % | All channels ON. Current set to 50 mA. MC = 7 CC = 127 DC = 255 PWM = 100% | 8 | |
| Channel to channel current error, IERR_CC = (IOUTX - IAVE) / IAVE × 100% | IERR_CC | -5.5 | 5.5 | % | All channels ON. Current set to 0.1 mA. MC = 0 CC = 42 DC = 25 PWM = 100% | 8 | |
| Channel to channel current error, IERR_CC = (IOUTX - IAVE) / IAVE × 100% | IERR_CC | -5 | 5 | % | All channels ON. Current set to 1 mA. MC = 2 CC = 127 DC = 25 PWM = 100% | 8 | |
| Channel to channel current error, IERR_CC = (IOUTX - IAVE) / IAVE × 100% | IERR_CC | -4 | 4 | % | All channels ON. Current set to 10 mA. MC = 2 CC = 127 DC = 255 PWM = 100% | 8 | |
| Channel to channel current error, IERR_CC = (IOUTX - IAVE) / IAVE × 100% | IERR_CC | -3.5 | 3.5 | % | All channels ON. Current set to 25 mA. MC = 7 CC = 64 DC = 255 PWM = 100% | 8 | |
| Channel to channel current error, IERR_CC = (IOUTX - IAVE) / IAVE × 100% | IERR_CC | -3 | 3 | % | All channels ON. Current set to 50 mA. MC = 7 CC = 127 DC = 255 PWM = 100% | 8 | |
| Device to device oscillator frequency error | fOSC_ERR | -3 | 3 | % | 9 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | chip as possible. GND plane connections to CVLED and GND pins must be on TOP layer copper with multiple | 43 |
CAD (KiCad official)
- Symbol:
LP5866RKPR - Footprint:
Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm - 3D model: VQFN-40(5x5) (KiCad packages3D, STEP)
- 3D model files:
lp5866rkpr-etched.step/lp5866rkpr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp5866rkpr.step/lp5866rkpr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (58 pp, sha256
c83c54efd274a001, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).