main
Ray Publish 0.1.1 109261a
{
  "schema_version": 1,
  "type": "component",
  "slug": "lp4078qvf",
  "title": "LP4078QVF",
  "brief": "LOWPOWER Battery Management, DFN-10-EP(3x3). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "pmic",
    "lp4078qvf"
  ],
  "component": {
    "mpn": "LP4078QVF",
    "manufacturer": "LOWPOWER",
    "package": "DFN-10-EP(3x3)",
    "pin_count": 11,
    "category": "PMIC",
    "subcategory": "Battery Management",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/258ee4cbd53d5b154ce9e62de61da8ed.pdf",
    "parts": {
      "symbol": "lp4078qvf.kicad_sym",
      "footprint": "lp4078qvf.kicad_mod",
      "model_3d": "lp4078qvf-hero.glb",
      "model_3d_plain": "lp4078qvf.glb",
      "model_3d_step": "lp4078qvf-etched.step",
      "model_3d_step_plain": "lp4078qvf.step",
      "lbr": "lp4078qvf.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply source, typically connected to a wall adaptor. Operating range 4.5V-6V; withstands up to 40V (absolute max) with 22V OVP threshold. Bypass to GND with a 1-10 uF ceramic capacitor."
      },
      {
        "number": "2",
        "name": "CHRG",
        "type": "output",
        "description": "Open-drain charge status output. Internal NMOS pulls the pin low while charging; goes high impedance when the charge cycle completes. Maximum sink current ~5 mA; requires an external pull-up resistor for logic-high state (typ. LED + 1k to BAT)."
      },
      {
        "number": "3",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good status output. Pulls low when VIN is above the UVLO threshold and above VBAT+150 mV, and below the OVP threshold; Hi-Z otherwise. Requires an external pull-up; max sink 5 mA."
      },
      {
        "number": "4",
        "name": "EN",
        "type": "input",
        "description": "Charge enable input (active low). Logic-low (<0.4V) or floating enables charging; logic-high (>1.4V) puts the device in shutdown. Tie to GND if the enable function is not needed."
      },
      {
        "number": "5",
        "name": "NTC",
        "type": "input",
        "description": "NTC thermistor input for battery temperature monitoring per JEITA. Uses an internal 48 uA bias current with a 10k NTC (B=3370) between NTC and GND. Thresholds correspond to 0/10/60 °C; charge is halved between 0-10 °C and disabled below 0 °C or above 60 °C. Tie via a fixed 10k resistor to GND to disable the feature."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground. Connect to the system ground plane together with pin 11 (exposed pad)."
      },
      {
        "number": "7",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection. Leave floating or tie to GND for best PCB layout."
      },
      {
        "number": "8",
        "name": "IBF",
        "type": "passive",
        "description": "Charge termination current threshold program pin. Connect a resistor R_IBF from IBF to GND; termination current I_BF = (R_ISET x I_BAT) / R_IBF. Example: R_ISET=1.7k, R_IBF=17k -> 100 mA termination."
      },
      {
        "number": "9",
        "name": "ISET",
        "type": "passive",
        "description": "Constant charge current program pin. Connect a resistor R_ISET from ISET to GND; constant current I_BAT = V_ISET x 1700 / R_ISET (V_ISET = 1V typ). R_ISET=1.7k gives ~1000 mA; R_ISET=3.4k gives ~500 mA."
      },
      {
        "number": "10",
        "name": "BAT",
        "type": "power_out",
        "description": "Battery pin. Connect to the single-cell Li-Ion/Li-Polymer battery positive terminal. Regulated float voltage 4.20V/4.35V/4.40V per ordering suffix; withstand up to 15V absolute max. Bypass with a 1-10 uF capacitor placed close to the pin."
      },
      {
        "number": "11",
        "name": "GND (PAD)",
        "type": "power_in",
        "description": "Exposed thermal pad on the package underside. Must be soldered to the PCB ground plane for electrical ground and thermal dissipation; add multiple vias to the ground plane to spread heat."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/258ee4cbd53d5b154ce9e62de61da8ed.pdf",
        "pages": 11,
        "sha256": "449276d21b78d6f5",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lp4078qvf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3,
          2.98,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "738e2eb45860c11759f8e4f44ab26932b7c15e4d5d6c8c9ac22ae866a3e38711",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lp4078qvf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3,
          2.98,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "9d89eff8eeb106fc604fe5b2c8094b17f1b6eca96b85f6caae4db2ed8b3a7c08",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "LOWPOWER",
      "Package": "DFN-10-EP(3x3)",
      "Category": "PMIC",
      "Pins": "11"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lp4078qvf"
  ],
  "discovery_pitch": "LP4078QVF (LOWPOWER) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lp4078qvf.kicad_sym",
    "lp4078qvf.kicad_mod",
    "lp4078qvf.glb",
    "lp4078qvf.step",
    "lp4078qvf.lbr",
    "docs/hero.png",
    "docs/lp4078qvf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lp4078qvf-etched.step",
    "lp4078qvf-hero.glb",
    "lp4078qvf-hero.overlay.json"
  ],
  "visibility": "public",
  "variants": [
    {
      "mpn": "LP4078QVF",
      "kind": "packaging"
    },
    {
      "mpn": "LP4078QVF-435",
      "kind": "packaging"
    },
    {
      "mpn": "LP4078QVF-440",
      "kind": "packaging"
    }
  ],
  "updated_at": "2026-09-28T17:58:41.672Z",
  "description": "LOWPOWER Battery Management, DFN-10-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "org": "adom"
}