main
Ray
lp4076hspf-435: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
d9df757
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200
{
"schema_version": 1,
"type": "component",
"slug": "lp4076hspf-435",
"title": "LP4076HSPF-435",
"brief": "LOWPOWER Battery Management, ESOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.2.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"pmic",
"lp4076hspf-435"
],
"component": {
"mpn": "LP4076HSPF-435",
"manufacturer": "LOWPOWER",
"package": "ESOP-8",
"pin_count": 9,
"category": "PMIC",
"subcategory": "Battery Management",
"datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2108271830_LOWPOWER-LP4076HSPF-435_C2890370.pdf",
"parts": {
"symbol": "lp4076hspf-435.kicad_sym",
"footprint": "lp4076hspf-435.kicad_mod",
"model_3d": "lp4076hspf-435-etched.glb",
"model_3d_plain": "lp4076hspf-435.glb",
"model_3d_step": "lp4076hspf-435-etched.step",
"model_3d_step_plain": "lp4076hspf-435.step",
"lbr": "lp4076hspf-435.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "TS",
"type": "input",
"description": "Battery temperature-detection input. Sensed against an internal resistor divider with thresholds at 60%VIN (cold) and 30%VIN (hot). Tie to GND or hold below 0.3V (VTS_DIS) to disable the TS function."
},
{
"number": "2",
"name": "ISET",
"type": "passive",
"description": "Charge-current program pin. Connect a 1% resistor RISET from ISET to GND; IBAT = 1700 x VISET / RISET (VISET typ 1V). Also used internally for termination detection when the pin voltage falls below 100mV."
},
{
"number": "3",
"name": "GND",
"type": "power_in",
"description": "System ground. Must be tied together with pin 9 (exposed pad) to the board ground plane."
},
{
"number": "4",
"name": "IN",
"type": "power_in",
"description": "Input power supply from a wall adapter. Operating range 4.5V-6V typ; absolute maximum 28V with internal OVP disabling the charger above ~7V (VOVP). UVLO rising threshold 3.5V."
},
{
"number": "5",
"name": "BAT",
"type": "power_out",
"description": "Battery connection and charger output. Regulated float voltage 4.35V (LP4076HSPF-435). Requires a 1uF ceramic cap with a battery attached, or a 10uF tantalum cap for stability when no battery is present. Absolute maximum -5V to 15V."
},
{
"number": "6",
"name": "FULL",
"type": "output",
"description": "Open-drain charge-status output. High-Z (external pull-up to VCC) while charging; pulled low by internal N-MOS when the charge cycle completes. VOL <= 0.5V at 5mA."
},
{
"number": "7",
"name": "CHRG",
"type": "output",
"description": "Open-drain charge-status output. Pulled low by internal N-MOS while charging; goes high-impedance (external pull-up to VCC) when the charge cycle completes. VOL <= 0.5V at 5mA."
},
{
"number": "8",
"name": "EN",
"type": "input",
"description": "Charge enable input, active high. VIH >= 1.4V, VIL <= 0.4V. Drive high to enable charging, low to shut down."
},
{
"number": "9",
"name": "GND",
"type": "power_in",
"description": "Exposed thermal pad on the bottom of the ESOP-8. Electrically connected to GND; must be soldered to the board ground plane for proper thermal performance and low-impedance ground."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2108271830_LOWPOWER-LP4076HSPF-435_C2890370.pdf",
"pages": 9,
"sha256": "6a7c9b070a7052a8",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 9,
"described": 9,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lp4076hspf-435.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.55
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lp4076hspf-435-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.55
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "eac12add728b31c17981bef25545f1bb8be9ea3134eb496bbf1175f8dc82a50c",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "LOWPOWER",
"Package": "ESOP-8",
"Category": "PMIC",
"Pins": "9"
}
},
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"lp4076hspf-435"
],
"discovery_pitch": "LP4076HSPF-435 (LOWPOWER) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lp4076hspf-435.kicad_sym",
"lp4076hspf-435.kicad_mod",
"lp4076hspf-435.glb",
"lp4076hspf-435.step",
"lp4076hspf-435-etched.step",
"lp4076hspf-435.lbr",
"docs/hero.png",
"docs/lp4076hspf-435-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"visibility": {
"public": true
},
"variants": [
{
"mpn": "LP4076HSPF-435",
"kind": "packaging"
}
],
"updated_at": "2026-09-28T17:58:34.057Z"
}