component
LP4061B6F
Public Made by Adomby adom
LOWPOWER Battery Management, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 21d ago |
| viewers | 21d ago |
| lp4061b6f-etched.glb | 21d ago |
| lp4061b6f-etched.step | 21d ago |
| lp4061b6f-hero.glb | 21d ago |
| lp4061b6f-hero.overlay.json | 21d ago |
| lp4061b6f.glb | 21d ago |
| lp4061b6f.kicad_mod | 21d ago |
| lp4061b6f.kicad_sym | 21d ago |
| lp4061b6f.lbr | 21d ago |
| lp4061b6f.step | 21d ago |
| package.json | 21d ago |
| page.json | 21d ago |
| README.md | 21d ago |
LP4061B6F
LOWPOWER · Battery Management · SOT-23-6
LP4061B6F from LOWPOWER, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | STAT1 | output | Open-drain charge status output that is pulled low by an internal N-channel MOSFET while the battery is charging and pulled high when the charge cycle is complete. |
| 2 | GND | power_in | Ground reference for the charger. |
| 3 | BAT | power_out | Charge current output that delivers charge current to the battery and regulates the final float voltage to 4.2V, disconnected in shutdown mode. |
| 4 | VCC | power_in | Positive input supply that powers the charger; VCC can range from 4.35V to 6.5V and should be bypassed with at least a 1µF capacitor. |
| 5 | STAT2 | output | Open-drain charge status output that is pulled high by an internal N-channel MOSFET while the battery is charging and pulled low when the charge cycle is complete. |
| 6 | PROG | bidirectional | Charge current program, charge current monitor and shutdown pin, where a 1% resistor to ground sets the charge current and floating the pin shuts the charger down. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Supply Voltage | VCC | 4.35 | 6.5 | V | 4 | ||
| Input Supply Current, Charge Mode | ICC | 350 | 2000 | μA | RPROG=10k | 4 | |
| Input Supply Current, Standby Mode | ICC | 200 | 500 | μA | Standby Mode (Charge Terminated) | 4 | |
| Input Supply Current, Shutdown Mode | ICC | 25 | 50 | μA | Shutdown Mode (RPROG NC, VCC<VBAT, or VCC<VUV) | 4 | |
| Regulated Output (Float) Voltage | VFLOAT | 4.158 | 4.2 | 4.242 | V | 0℃≤TA≤85℃, IBAT=40mA | 4 |
| BAT Pin Charge Current, RPROG=10k | IBAT | 100 | 120 | mA | RPROG=10k, Current Mode | 4 | |
| BAT Pin Charge Current, RPROG=2k | IBAT | 500 | 600 | mA | RPROG=2k, Current Mode | 4 | |
| BAT Pin Current, Standby Mode | IBAT | -2.5 | -6 | μA | Standby Mode, VBAT=4.2V | 4 | |
| BAT Pin Current, Shutdown Mode | IBAT | -2 | 1 | 2 | μA | Shutdown Mode (RPROG NC) | 4 |
| BAT Pin Current, Sleep Mode | IBAT | -2 | 1 | 2 | μA | Sleep Mode, VCC=0V | 4 |
| Trickle Charge Threshold Voltage | VTRIKL | 2.8 | 2.9 | 3 | V | RPROG=10k, VBAT Rising | 4 |
| VCC Undervoltage Lockout Threshold | VUV | 3.55 | 3.7 | 3.85 | V | From VCC Low to High | 4 |
| STAT1/2 Pin Output Low Voltage | VSTAT | 0.35 | 0.6 | V | ISTAT=5mA | 4 | |
| Trickle Charge Current | ITRIKL | 50 | mA | VBAT<VTRIKL, RPROG=2k | 4 | ||
| Trickle Charge Hysteresis Voltage | VTRHYS | 80 | mV | RPROG=10k | 4 | ||
| VCC Undervoltage Lockout Hysteresis | VUVHYS | 200 | mV | 4 | |||
| VCC-VBAT Lockout Threshold Voltage, Low to High | VASD | 100 | mV | VCC from Low to High | 4 | ||
| VCC-VBAT Lockout Threshold Voltage, High to Low | VASD | 30 | mV | VCC from High to Low | 4 | ||
| C/10 Termination Current Threshold | ITERM | 10 | % IBAT | 4 | |||
| PROG Pin Voltage | VPROG | 1 | V | RPROG=10k, Current Mode | 4 | ||
| STAT1/2 Pin Weak Pull-Down Current | ISTAT | 5 | μA | VSTAT=5V | 4 | ||
| Recharge Battery Threshold Voltage | ΔVRECHRG | 150 | mV | VFLOAT-VRECHRG | 4 | ||
| Junction Temperature in Constant Temperature Mode | TLIM | 150 | ℃ | 4 | |||
| Power FET ON Resistance (VCC to BAT) | RON | 600 | mΩ | Between VCC and BAT | 4 | ||
| Soft-Start Time | tSS | 100 | μs | IBAT=0 to IBAT=850V/RPROG | 4 | ||
| Input to GND (VCC) Voltage | -0.3 | 8 | V | 3 | |||
| BAT to GND Voltage | -0.3 | 8 | V | 3 | |||
| Other Pin to GND Voltage | -0.3 | 6 | V | 3 | |||
| Operation Temperature Range | -40 | 85 | ℃ | 3 | |||
| Junction Temperature | 150 | ℃ | 3 | ||||
| Storage Temperature | -65 | 165 | ℃ | 3 | |||
| Lead Temperature (Soldering) | 260 | ℃ | Soldering, 10sec | 3 | |||
| ESD Susceptibility HBM (Human Body Model) | 2 | KV | 3 | ||||
| ESD Susceptibility MM (Machine Model) | 200 | V | 3 | ||||
| Thermal Resistance, Junction to Ambient | θJA | 250 | ℃/W | Printed as SOT23-5, θJA | 3 |
CAD (KiCad official)
- Symbol:
LP4061B6F - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
lp4061b6f-etched.step/lp4061b6f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp4061b6f.step/lp4061b6f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LOWPOWER datasheet (8 pp, sha256
ddc6e94e352c402b, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).