main
Ray
lp4060b5f: laser-etched CAD + chip hero (factory 2.0.0 backfill)
7790c2d
LP4060B5F
LOWPOWER · Battery Management · SOT-23-5
LP4060B5F from LOWPOWER, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CHRG | output | Open-drain charge status output. Pulled low by an internal N-channel MOSFET (~5mA sink capability, VOL=0.35V typ at 5mA) while charging. Goes high-impedance on charge complete or under-voltage lockout; a ~5uA weak pull-down is present in manual shutdown while VCC exceeds UVLO. |
| 2 | GND | power_in | Device ground reference. |
| 3 | BAT | power_out | Charge current output to the single-cell Li-Ion battery. Regulates the final float voltage to 4.2V/4.35V (±1%) via an internal precision resistor divider. Sources up to 800mA; short-circuit tolerant continuously. |
| 4 | VCC | power_in | Positive input supply from a wall adapter or USB source. Operating range 3.9V to 6.5V (abs max 7V); bypass with at least 1uF. When VCC drops within 30mV of BAT, the LP4060 enters shutdown (IBAT < 1uA). |
| 5 | PROG | bidirectional | Charge current program and monitor pin. A 1% resistor RPROG to GND sets IBAT = 1000V / RPROG (e.g. 2kΩ = 500mA, 10kΩ = 100mA). In constant-current mode the pin servos to 1V; measuring VPROG gives an instantaneous readout of charge current. Floating this pin (RPROG removed) forces manual shutdown. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
LP4060B5F
CAD (KiCad official)
- Symbol:
LP4060B5F - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lp4060b5f-etched.step/lp4060b5f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp4060b5f.step/lp4060b5f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LOWPOWER datasheet (7 pp, sha256
e2bf429d449af837, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LP4060B5F
**LOWPOWER** · Battery Management · SOT-23-5
LP4060B5F from LOWPOWER, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CHRG | output | Open-drain charge status output. Pulled low by an internal N-channel MOSFET (~5mA sink capability, VOL=0.35V typ at 5mA) while charging. Goes high-impedance on charge complete or under-voltage lockout; a ~5uA weak pull-down is present in manual shutdown while VCC exceeds UVLO. |
| 2 | GND | power_in | Device ground reference. |
| 3 | BAT | power_out | Charge current output to the single-cell Li-Ion battery. Regulates the final float voltage to 4.2V/4.35V (±1%) via an internal precision resistor divider. Sources up to 800mA; short-circuit tolerant continuously. |
| 4 | VCC | power_in | Positive input supply from a wall adapter or USB source. Operating range 3.9V to 6.5V (abs max 7V); bypass with at least 1uF. When VCC drops within 30mV of BAT, the LP4060 enters shutdown (IBAT < 1uA). |
| 5 | PROG | bidirectional | Charge current program and monitor pin. A 1% resistor RPROG to GND sets IBAT = 1000V / RPROG (e.g. 2kΩ = 500mA, 10kΩ = 100mA). In constant-current mode the pin servos to 1V; measuring VPROG gives an instantaneous readout of charge current. Floating this pin (RPROG removed) forces manual shutdown. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
## Ordering variants
Same part, different packaging or reel option.
- `LP4060B5F`
## CAD (KiCad official)
- Symbol: `LP4060B5F`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `lp4060b5f-etched.step` / `lp4060b5f-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp4060b5f.step` / `lp4060b5f.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [LOWPOWER datasheet](docs/lp4060b5f-datasheet.pdf) (7 pp, sha256 `e2bf429d449af837`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lp4060b5f-datasheet.pdf)