main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lp4057b6f: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lp4057b6f: viewers · Ray
lp4057b6f-etched.fit.json lp4057b6f: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lp4057b6f-etched.glb lp4057b6f: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lp4057b6f-etched.step lp4057b6f: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lp4057b6f.glb Publish 0.1.0 · Ray
lp4057b6f.kicad_mod Publish 0.1.0 · Ray
lp4057b6f.kicad_sym Publish 0.1.0 · Ray
lp4057b6f.lbr Publish 0.1.0 · Ray
lp4057b6f.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json lp4057b6f: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md lp4057b6f: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

LP4057B6F

LOWPOWER · Battery Management · SOT-23-6

LP4057B6F from LOWPOWER, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CHRG output Open-drain charge status output. Pulled low by internal N-channel MOSFET while charging; high impedance when charge cycle is complete or in UVLO. Sink capability ~5mA; VOL ≤ 0.5V at 5mA.
2 GND power_in Device ground reference. Connect to system ground; also serves as the reference for RISET and input/output bypass capacitors.
3 BAT power_out Charge current output to the battery. Regulates the final float voltage to 4.2V ±1%. Supports up to 600mA charge current; also monitored internally for recharge threshold (~4.0V) and trickle-charge threshold (~3.0V). Bypass with 10µF capacitor.
4 IN power_in Positive input supply voltage (adapter or USB). Recommended 4.5V-6.5V (abs max 10V). UVLO rising threshold 3.8V. Bypass with 10µF capacitor (add ~1Ω series resistor with X5R ceramic to damp start-up transients).
5 FULL output Open-drain charge status output (complementary to CHRG). Pulled high (high impedance) by internal N-channel MOSFET while charging; pulled low when charge cycle is complete. Sink capability ~5mA; VOL ≤ 0.5V at 5mA.
6 ISET input Charge current program and monitor pin. Connect a 1% resistor RISET to GND to set charge current: IBAT = 1000 / RISET (e.g. 2kΩ → 500mA, 10kΩ → 100mA). In constant-current mode, this pin servos to 1V; VISET/RISET × 1000 gives instantaneous IBAT. Termination detected when VISET falls below ~100mV (C/10, ~15% of IBAT).

Key specifications

Parameter Value
Manufacturer LOWPOWER
Package SOT-23-6
Category PMIC
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • LP4057B6F

CAD (KiCad official)

  • Symbol: LP4057B6F
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: lp4057b6f-etched.step / lp4057b6f-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp4057b6f.step / lp4057b6f.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LOWPOWER datasheet (8 pp, sha256 e576ff14d60679ed, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF