← Commit history
page.json+9−6@@ -32,7 +32,7 @@ "number": "1", "name": "CHRG", "type": "output",- "description": "Open-drain charge status output. Pulled low by internal N-channel MOSFET while charging; high impedance when charge cycle is complete or in UVLO. Sink capability ~5mA; VOL \u2264 0.5V at 5mA."+ "description": "Open-drain charge status output. Pulled low by internal N-channel MOSFET while charging; high impedance when charge cycle is complete or in UVLO. Sink capability ~5mA; VOL ≤ 0.5V at 5mA." }, { "number": "2",@@ -44,25 +44,25 @@ "number": "3", "name": "BAT", "type": "power_out",- "description": "Charge current output to the battery. Regulates the final float voltage to 4.2V \u00b11%. Supports up to 600mA charge current; also monitored internally for recharge threshold (~4.0V) and trickle-charge threshold (~3.0V). Bypass with 10\u00b5F capacitor."+ "description": "Charge current output to the battery. Regulates the final float voltage to 4.2V ±1%. Supports up to 600mA charge current; also monitored internally for recharge threshold (~4.0V) and trickle-charge threshold (~3.0V). Bypass with 10µF capacitor." }, { "number": "4", "name": "IN", "type": "power_in",- "description": "Positive input supply voltage (adapter or USB). Recommended 4.5V-6.5V (abs max 10V). UVLO rising threshold 3.8V. Bypass with 10\u00b5F capacitor (add ~1\u03a9 series resistor with X5R ceramic to damp start-up transients)."+ "description": "Positive input supply voltage (adapter or USB). Recommended 4.5V-6.5V (abs max 10V). UVLO rising threshold 3.8V. Bypass with 10µF capacitor (add ~1Ω series resistor with X5R ceramic to damp start-up transients)." }, { "number": "5", "name": "FULL", "type": "output",- "description": "Open-drain charge status output (complementary to CHRG). Pulled high (high impedance) by internal N-channel MOSFET while charging; pulled low when charge cycle is complete. Sink capability ~5mA; VOL \u2264 0.5V at 5mA."+ "description": "Open-drain charge status output (complementary to CHRG). Pulled high (high impedance) by internal N-channel MOSFET while charging; pulled low when charge cycle is complete. Sink capability ~5mA; VOL ≤ 0.5V at 5mA." }, { "number": "6", "name": "ISET", "type": "input",- "description": "Charge current program and monitor pin. Connect a 1% resistor RISET to GND to set charge current: IBAT = 1000 / RISET (e.g. 2k\u03a9 \u2192 500mA, 10k\u03a9 \u2192 100mA). In constant-current mode, this pin servos to 1V; VISET/RISET \u00d7 1000 gives instantaneous IBAT. Termination detected when VISET falls below ~100mV (C/10, ~15% of IBAT)."+ "description": "Charge current program and monitor pin. Connect a 1% resistor RISET to GND to set charge current: IBAT = 1000 / RISET (e.g. 2kΩ → 500mA, 10kΩ → 100mA). In constant-current mode, this pin servos to 1V; VISET/RISET × 1000 gives instantaneous IBAT. Termination detected when VISET falls below ~100mV (C/10, ~15% of IBAT)." } ], "provenance": {@@ -126,5 +126,8 @@ "docs/lp4057b6f-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }