main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs lp4030hbqvf: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lp4030hbqvf: one-pass backfill (courtyard 15.91 -> 14.51 mm2 (margin 0.25, default), hero rebuilt in-pass (inputs chang… · Ray
lp4030hbqvf-etched.fit.json lp4030hbqvf: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lp4030hbqvf-etched.glb lp4030hbqvf: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lp4030hbqvf-etched.step lp4030hbqvf: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lp4030hbqvf-hero.glb lp4030hbqvf: hero from the plain model · Ray
lp4030hbqvf-hero.overlay.json lp4030hbqvf: hero from the plain model · Ray
lp4030hbqvf.glb Publish 0.1.0 · Ray
lp4030hbqvf.kicad_mod lp4030hbqvf: one-pass backfill (courtyard 15.91 -> 14.51 mm2 (margin 0.25, default), hero rebuilt in-pass (inputs chang… · Ray
lp4030hbqvf.kicad_sym Publish 0.1.0 · Ray
lp4030hbqvf.lbr lp4030hbqvf: one-pass backfill (courtyard 15.91 -> 14.51 mm2 (margin 0.25, default), hero rebuilt in-pass (inputs chang… · Ray
lp4030hbqvf.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md lp4030hbqvf: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

LP4030HBQVF

LOWPOWER · Battery Management · DFN-10-EP(3x3)

LP4030HBQVF from LOWPOWER, in a DFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Positive supply voltage input. Operating range 4.5V to 20V (28V absolute max). Place a 1µF ceramic capacitor from IN to PGND as close as possible to the IC.
2 TS input Battery temperature sense thermistor input. Senses the battery pack temperature via an external NTC/PTC divider referenced to VIN; charging is suspended when the battery temperature is out of range. Pulling TS up to IN shuts the device down.
3 STAT output Open-drain charge status output. Pulled low by an internal N-channel MOSFET while charging; high impedance when charge is complete. Maximum sink current 10mA; VOL ≤ 0.5V at ISTAT=5mA.
4 PMID power_in Power MOSFET input, common node between the internal reverse-blocking FET and the high-side switching FET. Connect a 10µF ceramic capacitor from PMID to ground as close as possible to the IC.
5 PGND power_in Power ground return for the switching converter (source of the internal low-side N-channel MOSFET).
6 AGND power_in Analog ground reference. Connect to PGND with a single-point connection at the device for proper layout.
7 BST passive High-side MOSFET driver bootstrap supply. Internally connected to the cathode of the boot-strap diode. Connect a 47nF bootstrap capacitor from BST to SW. BST-to-SW voltage rated -0.3V to 6V absolute max.
8 SW output Switching node. Internally connected to the source of the high-side N-channel HSFET and the drain of the low-side N-channel LSFET. Connect to the external power inductor (typically 2.2µH-4.7µH). Switching frequency 520kHz.
9 CSP input Charge current sensing positive input. Connect to the external current sense resistor Rcs (typically 25-50mΩ). Fast charge current IBAT = VCS/RCS with VCS typ. 51mV.
10 BAT power_out Battery voltage sensing and charge current sensing negative input. Connect to the positive terminal of the battery pack; 10µF ceramic capacitor recommended from BAT to PGND. Regulated float voltage 8.4V (LP4030HBQVF, 2-cell 4.2V/cell). Withstands up to 28V for input over-shoot protection.
11 PAD power_in Exposed thermal pad on the bottom of the DFN-10 package. Ground reference for the device and the primary thermal path; must be soldered to the PCB ground plane for heat dissipation.

Key specifications

Parameter Value
Manufacturer LOWPOWER
Package DFN-10-EP(3x3)
Category PMIC
Pins 11

Ordering variants

Same part, different packaging or reel option.

  • LP4030HBQVF
  • LP4030HAQVF
  • LP4030HAQVF-435
  • LP4030HAQVF-44
  • LP4030HBQVF-87
  • LP4030HCQVF
  • LP4030HCQVF-435
  • LP4030HDQVF
  • LP4030HDQVF-435

CAD (KiCad official)

  • Symbol: LP4030HBQVF
  • Footprint: Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm
  • 3D model: DFN-10-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: lp4030hbqvf-etched.step / lp4030hbqvf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp4030hbqvf.step / lp4030hbqvf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: LOWPOWER datasheet (13 pp, sha256 230b73688e6d4d02, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF