← Commit history
README.mdadded+58@@ -0,0 +1,58 @@+# LP4030HBQVF++**LOWPOWER** · Battery Management · DFN-10-EP(3x3)++LP4030HBQVF from LOWPOWER, in a DFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN | power_in | Positive supply voltage input. Operating range 4.5V to 20V (28V absolute max). Place a 1µF ceramic capacitor from IN to PGND as close as possible to the IC. |+| 2 | TS | input | Battery temperature sense thermistor input. Senses the battery pack temperature via an external NTC/PTC divider referenced to VIN; charging is suspended when the battery temperature is out of range. Pulling TS up to IN shuts the device down. |+| 3 | STAT | output | Open-drain charge status output. Pulled low by an internal N-channel MOSFET while charging; high impedance when charge is complete. Maximum sink current 10mA; VOL ≤ 0.5V at ISTAT=5mA. |+| 4 | PMID | power_in | Power MOSFET input, common node between the internal reverse-blocking FET and the high-side switching FET. Connect a 10µF ceramic capacitor from PMID to ground as close as possible to the IC. |+| 5 | PGND | power_in | Power ground return for the switching converter (source of the internal low-side N-channel MOSFET). |+| 6 | AGND | power_in | Analog ground reference. Connect to PGND with a single-point connection at the device for proper layout. |+| 7 | BST | passive | High-side MOSFET driver bootstrap supply. Internally connected to the cathode of the boot-strap diode. Connect a 47nF bootstrap capacitor from BST to SW. BST-to-SW voltage rated -0.3V to 6V absolute max. |+| 8 | SW | output | Switching node. Internally connected to the source of the high-side N-channel HSFET and the drain of the low-side N-channel LSFET. Connect to the external power inductor (typically 2.2µH-4.7µH). Switching frequency 520kHz. |+| 9 | CSP | input | Charge current sensing positive input. Connect to the external current sense resistor Rcs (typically 25-50mΩ). Fast charge current IBAT = VCS/RCS with VCS typ. 51mV. |+| 10 | BAT | power_out | Battery voltage sensing and charge current sensing negative input. Connect to the positive terminal of the battery pack; 10µF ceramic capacitor recommended from BAT to PGND. Regulated float voltage 8.4V (LP4030HBQVF, 2-cell 4.2V/cell). Withstands up to 28V for input over-shoot protection. |+| 11 | PAD | power_in | Exposed thermal pad on the bottom of the DFN-10 package. Ground reference for the device and the primary thermal path; must be soldered to the PCB ground plane for heat dissipation. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | LOWPOWER |+| Package | DFN-10-EP(3x3) |+| Category | PMIC |+| Pins | 11 |++## Ordering variants++- `LP4030HBQVF`+- `LP4030HBQVFLP4030HAQVF`+- `LP4030HBQVFLP4030HAQVF-435`+- `LP4030HBQVFLP4030HAQVF-44`+- `LP4030HBQVF-87`+- `LP4030HBQVFLP4030HCQVF`+- `LP4030HBQVFLP4030HCQVF-435`+- `LP4030HBQVFLP4030HDQVF`+- `LP4030HBQVFLP4030HDQVF-435`++## CAD (KiCad official)++- Symbol: `LP4030HBQVF`+- Footprint: `Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm`+- 3D model: DFN-10-EP(3x3) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [LOWPOWER datasheet](docs/lp4030hbqvf-datasheet.pdf) (13 pp, sha256 `230b73688e6d4d02`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lp4030hbqvf-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "lp4030hbqvf",+ "version": "0.1.0",+ "type": "component",+ "description": "LOWPOWER Battery Management, DFN-10-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "pmic",+ "lp4030hbqvf"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lp4030hbqvf.kicad_sym",+ "lp4030hbqvf.kicad_mod",+ "lp4030hbqvf.glb",+ "lp4030hbqvf.step",+ "lp4030hbqvf.lbr",+ "docs/hero.png",+ "docs/lp4030hbqvf-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}