LP3992-18B5F
LOWPOWER · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
LP3992-18B5F from LOWPOWER, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input voltage. Recommended operating range 2.5V to 5.5V (absolute max 6.5V). Bypass with >=1µF ceramic/tantalum capacitor located within 0.5 inch of the pin to a clean analog ground. |
| 2 | GND | power_in | Ground reference for the regulator. Return input and output capacitors to a clean analog ground. |
| 3 | EN | input | Chip enable, active high, TTL-logic-controlled. VIH >= 1.4V turns the LDO on; VIL <= 0.4V forces shutdown mode (<0.01µA typ). Input bias current 1.5µA typ at VEN=3V. If unused, tie to VIN for always-on operation. |
| 4 | NC | unconnected | No internal connection. Leave floating or tie to ground for mechanical support. |
| 5 | VOUT | power_out | Regulated 1.8V output (LP3992-18 variant), up to 300mA load current. Requires >=1µF low-ESR ceramic output capacitor (ESR > 25mΩ range) located within 0.5 inch of the pin for stability. Current-limited to ~450mA typ; internal thermal shutdown at 150°C. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
LP3992-18B5FLP3992-18B5FJ5FLP3992-18B5FB3F
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Input Voltage | VIN | 2.5 | 5.5 | V | 3 | ||
| EN Input Voltage (max printed as Vin+0.3V) | VEN | 0 | V | 3 | |||
| Operation Junction Temperature Range | TJ | -40 | 125 | °C | 3 | ||
| Operation Ambient Temperature Range | TA | -40 | 85 | °C | 3 | ||
| Supply Input Voltage (absolute maximum) | VIN | 6.5 | V | 3 | |||
| Other Pin Voltage (max printed as VIN+0.3V) | -0.3 | V | 3 | ||||
| Storage Temperature Range | TSTG | -65 | 165 | °C | 3 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 3 | |||
| Maximum Soldering Temperature | 260 | °C | at leads, 10 sec | 3 | |||
| Power Dissipation PD (T/SOT23-5 package) | PD | 500 | mW | TA = 25°C | 3 | ||
| ESD Susceptibility HBM (Human Body Model) | 2 | kV | HBM | 3 | |||
| ESD Susceptibility MM (Machine Model) | 200 | V | MM | 3 | |||
| Thermal Resistance Junction-to-Ambient (SOT23-5/SOT23) | θJA | 195 | °C/W | SOT23-5/SOT23 package | 3 | ||
| Thermal Resistance Junction-to-Case (SOT23-5/SOT23) | θJC | 60 | °C/W | SOT23-5/SOT23 package | 3 |
CAD (KiCad official)
- Symbol:
LP3992-18B5F - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lp3992-18b5f-etched.step/lp3992-18b5f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp3992-18b5f.step/lp3992-18b5f.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
lp3992-18b5f.step |
85 KB | You want the bare part, or you mark your own boards. |
lp3992-18b5f-etched.step |
2.4 MB | You want the part with LP3992-18B5F already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 582 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LOWPOWER datasheet (9 pp, sha256
c4874862660fdd11, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).