main
Ray
lp3984-28b5f: specified limits as data (metadata.characteristics, 21 rows from the datasheet)
d8fd419
LP3984-28B5F
LOWPOWER · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
LP3984-28B5F from LOWPOWER, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input voltage. Recommended operating range 2.5V to 5.5V (absolute max 6.5V). Requires a >=1µF ceramic or tantalum input capacitor placed within 0.5 inch of the pin. |
| 2 | GND | power_in | Ground reference for the LDO. Should be returned to a clean analog ground plane. |
| 3 | EN | input | Chip enable, active high, TTL-logic-compatible. VIH >= 1.4V turns the regulator on; VIL <= 0.4V forces shutdown (ISTBY ~1µA). Input bias current ~1µA at VEN=3V. Tie to VIN for always-on operation. Absolute max 0V to VIN+0.3V. |
| 4 | NC | unconnected | No connection. Leave floating or tie to ground per PCB layout preference. |
| 5 | VOUT | power_out | Regulated output voltage. Fixed 2.8V for the -28B5F option, +/-2% accuracy at IOUT=1mA, 300mA rated load current, current limit ~500mA. Requires a >=1µF low-ESR (>25mΩ) ceramic output capacitor placed within 0.5 inch of the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
LP3984-28B5F
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | ΔVOUT | -2 | 2 | % | IOUT=1mA | 4 | |
| Quiescent Current | IQ | 50 | 130 | μA | VEN≥1.2V, IOUT=0mA | 4 | |
| Dropout Voltage | VDROP | 200 | 240 | mV | IOUT=200mA, VOUT>2.8V | 4 | |
| Dropout Voltage | VDROP | 300 | 360 | mV | IOUT=300mA, VOUT>2.8V | 4 | |
| Standby Current | ISTBY | 1 | μA | VEN=GND, Shutdown | 4 | ||
| EN Logic-Low Voltage | VIL | 0.4 | V | VIN=3V to 5.5V, Shutdown | 4 | ||
| EN Logic-High Voltage | VIH | 1.4 | V | VIN=3V to 5.5V, Start-Up | 4 | ||
| Supply Input Voltage (absolute maximum) | 6.5 | V | 3 | ||||
| Other Pin Voltage (upper limit VIN+0.3V) | -0.3 | V | Upper limit VIN+0.3V | 3 | |||
| Power Dissipation SOT23-5 | PD | 500 | mW | TA = 25℃ | 3 | ||
| Maximum Junction Temperature | 150 | ℃ | 3 | ||||
| Maximum Soldering Temperature | 260 | ℃ | At leads, 10 sec | 3 | |||
| Storage Temperature Range | -65 | 150 | ℃ | 3 | |||
| ESD HBM (Human Body Model) | 2 | kV | HBM | 3 | |||
| ESD MM (Machine Model) | 200 | V | MM | 3 | |||
| Supply Input Voltage (recommended) | 2.5 | 5.5 | V | 3 | |||
| EN Input Voltage (upper limit VIN+0.3V) | 0 | V | Upper limit VIN+0.3V | 3 | |||
| Operation Junction Temperature Range | -40 | 125 | ℃ | 3 | |||
| Operation Ambient Temperature Range | -40 | 85 | ℃ | 3 | |||
| Thermal Resistance, junction to ambient (SOT23-5) | θJA | 195 | ℃/W | 3 | |||
| Thermal Resistance, junction to case (SOT23-5) | θJC | 60 | ℃/W | 3 |
CAD (KiCad official)
- Symbol:
LP3984-28B5F - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lp3984-28b5f-etched.step/lp3984-28b5f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp3984-28b5f.step/lp3984-28b5f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LOWPOWER datasheet (6 pp, sha256
a1514bb510946b2a, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LP3984-28B5F
**LOWPOWER** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
LP3984-28B5F from LOWPOWER, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input voltage. Recommended operating range 2.5V to 5.5V (absolute max 6.5V). Requires a >=1µF ceramic or tantalum input capacitor placed within 0.5 inch of the pin. |
| 2 | GND | power_in | Ground reference for the LDO. Should be returned to a clean analog ground plane. |
| 3 | EN | input | Chip enable, active high, TTL-logic-compatible. VIH >= 1.4V turns the regulator on; VIL <= 0.4V forces shutdown (ISTBY ~1µA). Input bias current ~1µA at VEN=3V. Tie to VIN for always-on operation. Absolute max 0V to VIN+0.3V. |
| 4 | NC | unconnected | No connection. Leave floating or tie to ground per PCB layout preference. |
| 5 | VOUT | power_out | Regulated output voltage. Fixed 2.8V for the -28B5F option, +/-2% accuracy at IOUT=1mA, 300mA rated load current, current limit ~500mA. Requires a >=1µF low-ESR (>25mΩ) ceramic output capacitor placed within 0.5 inch of the pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
## Ordering variants
Same part, different packaging or reel option.
- `LP3984-28B5F`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | ΔVOUT | -2 | | 2 | % | IOUT=1mA | 4 |
| Quiescent Current | IQ | | 50 | 130 | μA | VEN≥1.2V, IOUT=0mA | 4 |
| Dropout Voltage | VDROP | | 200 | 240 | mV | IOUT=200mA, VOUT>2.8V | 4 |
| Dropout Voltage | VDROP | | 300 | 360 | mV | IOUT=300mA, VOUT>2.8V | 4 |
| Standby Current | ISTBY | | | 1 | μA | VEN=GND, Shutdown | 4 |
| EN Logic-Low Voltage | VIL | | | 0.4 | V | VIN=3V to 5.5V, Shutdown | 4 |
| EN Logic-High Voltage | VIH | 1.4 | | | V | VIN=3V to 5.5V, Start-Up | 4 |
| Supply Input Voltage (absolute maximum) | | | | 6.5 | V | | 3 |
| Other Pin Voltage (upper limit VIN+0.3V) | | -0.3 | | | V | Upper limit VIN+0.3V | 3 |
| Power Dissipation SOT23-5 | PD | | | 500 | mW | TA = 25℃ | 3 |
| Maximum Junction Temperature | | | | 150 | ℃ | | 3 |
| Maximum Soldering Temperature | | | | 260 | ℃ | At leads, 10 sec | 3 |
| Storage Temperature Range | | -65 | | 150 | ℃ | | 3 |
| ESD HBM (Human Body Model) | | | | 2 | kV | HBM | 3 |
| ESD MM (Machine Model) | | | | 200 | V | MM | 3 |
| Supply Input Voltage (recommended) | | 2.5 | | 5.5 | V | | 3 |
| EN Input Voltage (upper limit VIN+0.3V) | | 0 | | | V | Upper limit VIN+0.3V | 3 |
| Operation Junction Temperature Range | | -40 | | 125 | ℃ | | 3 |
| Operation Ambient Temperature Range | | -40 | | 85 | ℃ | | 3 |
| Thermal Resistance, junction to ambient (SOT23-5) | θJA | | 195 | | ℃/W | | 3 |
| Thermal Resistance, junction to case (SOT23-5) | θJC | | 60 | | ℃/W | | 3 |
## CAD (KiCad official)
- Symbol: `LP3984-28B5F`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `lp3984-28b5f-etched.step` / `lp3984-28b5f-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp3984-28b5f.step` / `lp3984-28b5f.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [LOWPOWER datasheet](docs/lp3984-28b5f-datasheet.pdf) (6 pp, sha256 `a1514bb510946b2a`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lp3984-28b5f-datasheet.pdf)