← Commit history
page.json+8−5@@ -32,7 +32,7 @@ "number": "1", "name": "VIN", "type": "power_in",- "description": "Power input voltage. Recommended operating range 2 V to 6 V (absolute max 7 V). Decouple with a \u22651 \u00b5F (typ. 2.2 \u00b5F) low-ESR ceramic capacitor placed within 0.5 inch of this pin and returned to a clean analog ground."+ "description": "Power input voltage. Recommended operating range 2 V to 6 V (absolute max 7 V). Decouple with a ≥1 µF (typ. 2.2 µF) low-ESR ceramic capacitor placed within 0.5 inch of this pin and returned to a clean analog ground." }, { "number": "2",@@ -44,19 +44,19 @@ "number": "3", "name": "EN", "type": "input",- "description": "Chip enable, active high. VIH \u2265 1.4 V turns the regulator on; VIL \u2264 0.4 V places it into shutdown (<0.1 \u00b5A typ). An integrated 1 M\u03a9 pull-down to GND holds the part off when EN is floating. Tie to VIN for always-on operation. Absolute max: -0.3 V to VIN+0.3 V."+ "description": "Chip enable, active high. VIH ≥ 1.4 V turns the regulator on; VIL ≤ 0.4 V places it into shutdown (<0.1 µA typ). An integrated 1 MΩ pull-down to GND holds the part off when EN is floating. Tie to VIN for always-on operation. Absolute max: -0.3 V to VIN+0.3 V." }, { "number": "4", "name": "ADJ", "type": "input",- "description": "Adjustable feedback input. Connect the midpoint of an external R1/R2 divider from VOUT to GND to set the output: Vout = VFB \u00d7 (1 + R1/R2), with VFB = 0.8 V (typ). A small 22 pF / 47 pF feed-forward capacitor across R1 reduces output ripple and improves transient response."+ "description": "Adjustable feedback input. Connect the midpoint of an external R1/R2 divider from VOUT to GND to set the output: Vout = VFB × (1 + R1/R2), with VFB = 0.8 V (typ). A small 22 pF / 47 pF feed-forward capacitor across R1 reduces output ripple and improves transient response." }, { "number": "5", "name": "VOUT", "type": "power_out",- "description": "Regulated output. Delivers up to 300 mA continuous (550 mA current limit). Requires a low-ESR ceramic output capacitor of \u22651 \u00b5F (typ. 2.2 \u00b5F, ESR > 25 m\u03a9 recommended) placed within 0.5 inch of this pin for stability."+ "description": "Regulated output. Delivers up to 300 mA continuous (550 mA current limit). Requires a low-ESR ceramic output capacitor of ≥1 µF (typ. 2.2 µF, ESR > 25 mΩ recommended) placed within 0.5 inch of this pin for stability." } ], "provenance": {@@ -120,5 +120,8 @@ "docs/lp3983sab5f-08-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }