component
LP3983HAB5F
Public Made by Adomby adom
LOWPOWER Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLP3983HAB5F
LOWPOWER · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
LP3983HAB5F from LOWPOWER, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input voltage; the datasheet's recommended supply input range is 2.2V to 6V, with an absolute maximum of 6.5V. |
| 2 | GND | power_in | Ground reference pin for the regulator. |
| 3 | EN | input | Chip enable, active high: the regulator turns on above 1.4V (not above Vin+0.3V) and shuts down below 0.4V, with an internal 1MΩ pull-down to GND when floating. |
| 4 | ADJ | input | Feedback pin with a 0.8V reference voltage (the pin table labels this pin "BP" while the pin diagram and ordering information say ADJ). |
| 5 | VOUT | power_out | Output voltage, set by Vout = VFB × (1 + R1/R2) with VFB = 0.8V; rated for up to 600mA output current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Loading Current | ILOAD | 600 | mA | VEN=VIN, VIN>2.5V | 4 | ||
| Current Limit | ILIM | 750 | mA | RLOAD = 1Ω | 4 | ||
| Adjustable voltage reference | VFB | 0.784 | 0.8 | 0.816 | V | IOUT=1mA | 4 |
| Quiescent Current | IQ | 75 | 130 | μA | VEN ≥ 1.2V, IOUT = 0mA | 4 | |
| Dropout Voltage | VDROP | 140 | 160 | mV | IOUT = 200mA, VOUT >2.8V | 4 | |
| Dropout Voltage | VDROP | 280 | 320 | mV | IOUT = 400mA, VOUT >2.8V | 4 | |
| Dropout Voltage | VDROP | 420 | 480 | mV | IOUT = 600mA, VOUT >2.8V | 4 | |
| Line Regulation | ΔVLINE | 0.2 | % | VIN = (VOUT + 1V) to 5.5V, IOUT = 1mA | 4 | ||
| Load Regulation | ΔVLOAD | 2 | % | 1mA < IOUT < 300mA | 4 | ||
| Standby Current | ISTBY | 0.01 | 1 | μA | VEN = GND, Shutdown | 4 | |
| EN Input Bias Current | IIBSD | 5 | nA | VEN = 5V | 4 | ||
| EN Threshold Logic-Low Voltage | VIL | 0.4 | V | VIN=3V to 5.5V, Shutdown | 4 | ||
| EN Threshold Logic-High Voltage | VIH | 1.4 | V | VIN=3V to 5.5V, Start-Up | 4 | ||
| Output Noise Voltage | 100 | uVRMS | 10Hz to 100kHz, IOUT=200mA, COUT=1µF | 4 | |||
| Power Supply Rejection Rate | PSRR | -70 | dB | f = 217Hz, COUT=1µF, IOUT=10mA | 4 | ||
| Power Supply Rejection Rate | PSRR | -58 | dB | f = 1kHz, COUT=1µF, IOUT=10mA | 4 | ||
| Thermal Shutdown Temperature | TSD | 150 | °C | 4 | |||
| Supply Input Voltage | VIN | 2.2 | 6 | V | 3 | ||
| Operation Ambient Temperature Range | TA | -40 | 85 | °C | 3 | ||
| Supply Input Voltage | VIN | -0.3 | 6.5 | V | 3 | ||
| EN Pin Voltage | VEN | -0.3 | V | upper limit Vin+0.3V | 3 | ||
| Power Dissipation (SOT23-5) | PD | 500 | mW | TA = 25°C | 3 | ||
| Storage Temperature Range | TSTG | -40 | 150 | °C | 3 | ||
| Lead Temperature (Soldering, 10 sec.) | 260 | °C | 10 sec soldering | 3 | |||
| ESD HBM (Human Body Model) | 2 | kV | 3 | ||||
| ESD MM (Machine Model) | 200 | V | 3 | ||||
| Package Thermal Resistance Junction-to-Ambient (SOT23-5) | θJA | 195 | °C/W | SOT23-5 | 3 |
CAD (KiCad official)
- Symbol:
LP3983HAB5F - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lp3983hab5f-etched.step/lp3983hab5f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp3983hab5f.step/lp3983hab5f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LOWPOWER datasheet (10 pp, sha256
9c8434c9251d8e04, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).