component
LP3982IMMX-ADJ
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, VSSOP-8-0.65mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -78,25 +78,25 @@ "number": "5", "name": "SET", "type": "input",- "description": "Resistor divider input for setting output voltage in the adjustable version (voltage range \u22120.3 to 6.5 V); internally disconnected in fixed versions."+ "description": "Resistor divider input for setting output voltage in the adjustable version (voltage range −0.3 to 6.5 V); internally disconnected in fixed versions." }, { "number": "6", "name": "CC", "type": "passive",- "description": "Noise compensation capacitor connection pin; connect 33-nF capacitor to ground for optimal output noise reduction (voltage range \u22120.3 to 6.5 V)."+ "description": "Noise compensation capacitor connection pin; connect 33-nF capacitor to ground for optimal output noise reduction (voltage range −0.3 to 6.5 V)." }, { "number": "7", "name": "SHDN", "type": "input",- "description": "Shutdown control input; pull high for ON state or low for OFF state (voltage range \u22120.3 to 6.5 V)."+ "description": "Shutdown control input; pull high for ON state or low for OFF state (voltage range −0.3 to 6.5 V)." }, { "number": "8", "name": "FAULT", "type": "output",- "description": "Active-low open-drain fault output that indicates out-of-regulation conditions including current limit, thermal shutdown, or approaching dropout (maximum sink current 20 mA); requires pullup resistor (voltage range \u22120.3 to 6.5 V)."+ "description": "Active-low open-drain fault output that indicates out-of-regulation conditions including current limit, thermal shutdown, or approaching dropout (maximum sink current 20 mA); requires pullup resistor (voltage range −0.3 to 6.5 V)." } ], "provenance": {@@ -174,5 +174,8 @@ "docs/lp3982immx-adj-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }