component
LP3982IMMX-ADJ
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, VSSOP-8-0.65mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLP3982IMMX-ADJ
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · VSSOP-8-0.65mm
LP3982IMMX-ADJ from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output voltage with maximum 300-mA output current and 120-mV typical dropout voltage. |
| 2 | IN | power_in | Input supply voltage to the regulator; supply range is 2.5 V to 6 V. |
| 3 | GND | power_in | Ground reference. |
| 4 | OUT | power_out | Regulated output voltage with maximum 300-mA output current and 120-mV typical dropout voltage. |
| 5 | SET | input | Resistor divider input for setting output voltage in the adjustable version (voltage range −0.3 to 6.5 V); internally disconnected in fixed versions. |
| 6 | CC | passive | Noise compensation capacitor connection pin; connect 33-nF capacitor to ground for optimal output noise reduction (voltage range −0.3 to 6.5 V). |
| 7 | SHDN | input | Shutdown control input; pull high for ON state or low for OFF state (voltage range −0.3 to 6.5 V). |
| 8 | FAULT | output | Active-low open-drain fault output that indicates out-of-regulation conditions including current limit, thermal shutdown, or approaching dropout (maximum sink current 20 mA); requires pullup resistor (voltage range −0.3 to 6.5 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.65mm |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LP3982IMMX-ADJ - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
- 3D model files:
lp3982immx-adj-etched.step/lp3982immx-adj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp3982immx-adj.step/lp3982immx-adj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
f8dc0ff43bb7195c, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).