main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lp3982imm-3-0: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lp3982imm-3-0: viewers · Ray
lp3982imm-3-0-etched.fit.json lp3982imm-3-0: one-pass backfill (re-etched, hero: page declares one already) · Ray
lp3982imm-3-0-etched.glb lp3982imm-3-0: one-pass backfill (re-etched, hero: page declares one already) · Ray
lp3982imm-3-0-etched.step lp3982imm-3-0: one-pass backfill (re-etched, hero: page declares one already) · Ray
lp3982imm-3-0-hero.glb lp3982imm-3-0: one-pass backfill (re-etched, hero: page declares one already) · Ray
lp3982imm-3-0-hero.overlay.json lp3982imm-3-0: one-pass backfill (re-etched, hero: page declares one already) · Ray
lp3982imm-3-0.glb Publish 0.1.0 · Ray
lp3982imm-3-0.kicad_mod Publish 0.1.0 · Ray
lp3982imm-3-0.kicad_sym Publish 0.1.0 · Ray
lp3982imm-3-0.lbr Publish 0.1.0 · Ray
lp3982imm-3-0.step Publish 0.1.0 · Ray
package.json Publish 0.1.2 · Ray
page.json Publish 0.1.2 · Ray
README.md Initial commit: component/lp3982imm-3-0 · Ray

LP3982IMM-3.0

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · VSSOP-8

LP3982IMM-3.0 from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Regulated output voltage.
2 IN input Input supply voltage to the regulator.
3 GND power_in Ground.
4 OUT output Regulated output voltage.
5 SET input In adjustable versions, sets output voltage via resistor divider; internally disconnected in fixed versions.
6 CC passive Connect a 33-nF capacitor between this pin and ground to reduce output noise.
7 SHDN input Shutdown control input; pull high or low to control ON/OFF state.
8 FAULT tri_state Active-low open-drain output that pulls low during out-of-regulation, current limit, thermal shutdown, or dropout conditions; requires external pullup resistor.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Power Management (PMIC)
Pins 8

CAD (KiCad official)

  • Symbol: LP3982IMM-3.0
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: lp3982imm-3-0-etched.step / lp3982imm-3-0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp3982imm-3-0.step / lp3982imm-3-0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 f8dc0ff43bb7195c, retrieved 2026-10-01, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF