component
LP3981AB5F
Public Made by Adomby adom
LOWPOWER Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLP3981AB5F
LOWPOWER · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
LP3981AB5F from LOWPOWER, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Power supply pin; the recommended supply input voltage is 2.5V to 5.5V. |
| 2 | GND | power_in | Ground pin. |
| 3 | EN | input | Chip enable, active high; the pin is high impedance, so a 100kΩ pull-down resistor to GND is required when the control signal is floating, and EN input voltage is limited to 0V to 5.5V. |
| 4 | FB | input | Feedback pin for the adjustable output; the reference voltage is 0.8V. |
| 5 | OUT | power_out | Regulated output pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | ΔVOUT | -2 | 2 | % | IOUT=1mA | 6 | |
| Current Limit | ILIM | 450 | 550 | mA | RLOAD=1Ω | 6 | |
| Maximum Output Current | Imax | 300 | mA | VIN>2.8V | 6 | ||
| Standby Current | ISTBY | 0.1 | 1 | μA | VEN=0V, Shutdown | 6 | |
| EN Input Bias Current | IIBSD | 0.6 | 2 | μA | VEN=1V | 6 | |
| EN Logic-Low Voltage | VIL | 0.4 | V | VIN=(VOUT+1V) to 5.5V, Shutdown | 6 | ||
| EN Logic-High Voltage | VIH | 1.4 | V | VIN=(VOUT+1V) to 5.5V, Start-Up | 6 | ||
| Output Noise Voltage | 100 | μVRMS | 10Hz to 100kHz, IOUT=200mA | 6 | |||
| Adjustable voltage reference | VFB | 0.8 | V | IOUT=1mA | 6 | ||
| Thermal Shutdown Temperature | TSD | 160 | ℃ | IOUT=0.1mA | 6 | ||
| Supply Input Voltage | -0.3 | 6 | V | 5 | |||
| Other Pins Voltage | -0.3 | 6 | V | 5 | |||
| Power Dissipation, PD | PD | 400 | mW | TA=25℃, SOT23-5 | 5 | ||
| Package Thermal Resistance, SOT23-5 | θJA | 250 | ℃/W | SOT23-5 | 5 | ||
| Lead Temperature (Soldering, 10 sec.) | 260 | ℃ | 10 sec soldering | 5 | |||
| Storage Temperature Range | -60 | 125 | ℃ | 5 | |||
| ESD HBM (Human Body Model) | 2 | KV | Human Body Model | 5 | |||
| ESD MM (Machine Model) | 200 | V | Machine Model | 5 | |||
| Supply Input Voltage | 2.5 | 5.5 | V | 5 | |||
| EN Input Voltage | 0 | 5.5 | V | 5 | |||
| Operation Junction Temperature Range | -40 | 125 | ℃ | 5 | |||
| Operation Ambient Temperature Range | -40 | 85 | ℃ | 5 |
CAD (KiCad official)
- Symbol:
LP3981AB5F - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lp3981ab5f-etched.step/lp3981ab5f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp3981ab5f.step/lp3981ab5f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LOWPOWER datasheet (17 pp, sha256
55e2ed73e4036900, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).