component
LP3980-25B5F
Public Made by Adomby adom
LOWPOWER Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 8d ago |
| viewers | 8d ago |
| lp3980-25b5f-etched.glb | 8d ago |
| lp3980-25b5f-etched.step | 8d ago |
| lp3980-25b5f-hero.glb | 8d ago |
| lp3980-25b5f-hero.overlay.json | 8d ago |
| lp3980-25b5f.glb | 8d ago |
| lp3980-25b5f.kicad_mod | 8d ago |
| lp3980-25b5f.kicad_sym | 8d ago |
| lp3980-25b5f.lbr | 8d ago |
| lp3980-25b5f.step | 8d ago |
| package.json | 8d ago |
| page.json | 8d ago |
| README.md | 8d ago |
LP3980-25B5F
LOWPOWER · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
LP3980-25B5F from LOWPOWER, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input voltage; the input range is 1.6V to 5.5V. |
| 2 | GND | power_in | Ground pin. |
| 3 | EN | input | Enable pin; the LDO turns on when EN is above 1.4V and shuts down when EN falls below 0.4V. |
| 4 | NC | unconnected | No connect on this fixed-output variant; the FB feedback function applies only to the LP3980A (ADJ) version. |
| 5 | OUT | power_out | Regulated output voltage; maximum output current is 300mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 1.6 | 5.5 | V | 5 | ||
| Output Voltage Accuracy | ΔVOUT | -2 | 2 | % | IOUT=1mA | 5 | |
| Maximum Output Current | Imax | 300 | mA | VEN=VIN>2.5V | 5 | ||
| Current Limit | ILIM | 650 | mA | RLOAD=1Ω | 5 | ||
| Quiescent Current | IQ | 20 | μA | VEN>1.2V, IOUT=0mA | 5 | ||
| Standby Current | ISTBY | 0.01 | 1 | μA | VEN=0V, Shutdown | 5 | |
| EN Input Bias Current | IIBSD | 0.1 | 1 | μA | VEN=0V | 5 | |
| EN Logic-Low Voltage | VIL | 0.4 | V | VIN=3V to 5.5V, Shutdown | 5 | ||
| EN Logic-High Voltage | VIH | 1.4 | V | VIN=3V to 5.5V, Start-Up | 5 | ||
| Output Noise Voltage | 100 | μVRMS | f=10Hz to 100kHz, IOUT=0mA, VOUT=2.8V | 5 | |||
| Power Supply Rejection Rate | PSRR | -80 | dB | f=217Hz, COUT=1µF, IOUT=50mA | 5 | ||
| Power Supply Rejection Rate | PSRR | -76 | dB | f=1KHz | 5 | ||
| Auto-discharge On Resistance | RDIS | 40 | Ω | 5 | |||
| Thermal Shutdown Temperature | TSD | 150 | ℃ | 5 | |||
| Input to GND | -0.3 | 6 | V | 4 | |||
| EN to GND | -0.3 | 6 | V | 4 | |||
| Output Voltage to GND | -0.3 | V | max printed as VIN+0.3V | 4 | |||
| Maximum Junction Temperature | TJ | 150 | ℃ | 4 | |||
| Operating Ambient Temperature Range | TA | -40 | 85 | ℃ | 4 | ||
| Maximum Soldering Temperature | 260 | ℃ | at leads, 10 sec | 4 | |||
| ESD HBM | 2 | kV | Human Body Model | 4 | |||
| ESD MM | 200 | V | Machine Model | 4 | |||
| Maximum Power Dissipation (SOT23-5) | PD | 400 | mW | TA=25℃ | 4 | ||
| Thermal Resistance (SOT23-5) | θJA | 250 | ℃/W | 4 | |||
| Maximum Junction Temperature (operating) | TJ(MAX) | 125 | ℃ | 9 | |||
| Output Capacitor | COUT | 1 | µF | ceramic, ESR>25mΩ | 9 |
CAD (KiCad official)
- Symbol:
LP3980-25B5F - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lp3980-25b5f-etched.step/lp3980-25b5f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp3980-25b5f.step/lp3980-25b5f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LOWPOWER datasheet (13 pp, sha256
aeffea9306601346, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).