Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
LP3965EMP-3.3
Texas Instruments · Linear Voltage Regulators (LDO) · SOT-223-5
LP3965EMP-3.3 from Texas Instruments, in a SOT-223-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SD | input | Shutdown input: the output is off when pulled low (VSD ≤ 0.2V, typically 15µA ground current in shutdown) and on when high (VIN − 0.3V minimum), with survival range −0.3V to VIN + 0.3V; it must be pulled high through a 10kΩ resistor if used. |
| 2 | VIN | power_in | Input supply pin; operating range is 2.5V to 7.0V, with survival limits of −0.3V to +7.5V, and VIN must be at least VOUT(NOM) + VDROPOUT or 2.5V, whichever is greater. |
| 3 | VOUT | power_out | Regulated output pin, supplying up to 1.5A DC with output voltage tolerance of ±1.5% at 25°C and ±3.0% over line, load and temperature. |
| 4 | SENSE/ADJ | input | On the LP3965 this is a remote sense pin for improved load regulation (maximum voltage VOUT + 0.3V), and on the ADJ version it is the output adjust pin with a typical adjust voltage of 1.234V. |
| 5 | GND | power_in | Ground reference pin for the regulator. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-223-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Tolerance | VO | -1.5 | 0 | 1.5 | % | 10 mA ≤ IL ≤ 1.5A | 5 |
| Output Voltage Tolerance | VO | -3 | 3 | % | VOUT +1 ≤ VIN ≤ 7.0V | 5 | |
| Output Voltage Line Regulation | ΔVOL | 0.02 | 0.06 | % | VOUT+1V<VIN<7.0V | 5 | |
| Output Voltage Load Regulation | ΔVO/ΔIOUT | 0.04 | 0.09 | % | 10 mA < IL < 1.5 A | 5 | |
| Dropout Voltage | VIN - VOUT | 38 | 45 | mV | IL = 150 mA | 5 | |
| Dropout Voltage | VIN - VOUT | 38 | 55 | mV | IL = 150 mA | 5 | |
| Dropout Voltage | VIN - VOUT | 380 | 450 | mV | IL = 1.5 A | 5 | |
| Dropout Voltage | VIN - VOUT | 380 | 550 | mV | IL = 1.5 A | 5 | |
| Ground Pin Current In Normal Operation Mode | IGND | 4 | 9 | mA | IL = 150 mA | 5 | |
| Ground Pin Current In Normal Operation Mode | IGND | 4 | 10 | mA | IL = 150 mA | 5 | |
| Ground Pin Current In Normal Operation Mode | IGND | 5 | 14 | mA | IL = 1.5 A | 5 | |
| Ground Pin Current In Normal Operation Mode | IGND | 5 | 15 | mA | IL = 1.5 A | 5 | |
| Ground Pin Current In Shutdown Mode | IGND | 15 | 25 | µA | VSD ≤ 0.2V | 5 | |
| Ground Pin Current In Shutdown Mode | IGND | 15 | 75 | µA | VSD ≤ 0.2V | 5 | |
| Peak Output Current | IO(PK) | 2 | 2.5 | A | See (6) | 5 | |
| Peak Output Current | IO(PK) | 1.7 | 2.5 | A | See (6) | 5 | |
| Shutdown Threshold, Output = Low | VSDT | 0 | 0.2 | V | Output = Low | 5 | |
| Error Flag Threshold | VT | 5 | 10 | 16 | % | See (7) | 6 |
| Error Flag Threshold Hysteresis | VTH | 2 | 5 | 8 | % | See (7) | 6 |
| Error Flag Saturation Voltage | VEF(Sat) | 0.02 | 0.1 | V | Isink = 100µA | 6 | |
| Input Supply Voltage (Operating) | VIN | 2.5 | 7 | V | Minimum is the greater of VOUT(NOM)+VDROPOUT or 2.5V | 5 | |
| Shutdown Input Voltage (Operating) | VSD | -0.3 | V | Upper limit printed as VIN+0.3V | 5 | ||
| Maximum Operating Current (DC) | IOUT | 1.5 | A | 5 | |||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | 5 | ||
| Input Supply Voltage (Survival) | VIN | -0.3 | 7.5 | V | Survival | 4 | |
| Shutdown Input Voltage (Survival) | VSD | -0.3 | V | Survival; upper limit printed as VIN+0.3V | 4 | ||
| Output Voltage (Survival) | VOUT | -0.3 | 7.5 | V | Survival | 4 | |
| ESD Rating | ESD | 2 | kV | Human body model (100pF through 1.5kΩ) | 4 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 4 | ||
| Lead Temperature (Soldering) | 260 | °C | 5 sec. | 4 | |||
| Junction-to-Ambient Thermal Resistance (SOT-223) | θJA | 90 | °C/W | 0.5 in², 1 oz. copper area; derate for SOT-223 package | 4 |
CAD (KiCad official)
- Symbol:
LP3965EMP-3.3 - Footprint:
Package_TO_SOT_SMD:SOT-223-5 - 3D model: SOT-223-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm nominal SOT height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
lp3965emp-3-3-etched.step/lp3965emp-3-3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp3965emp-3-3.step/lp3965emp-3-3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
b00b56420cf9c3e4, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).