component
LP3965EMP-2.5
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
LP3965EMP-2.5
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-5
LP3965EMP-2.5 from Texas Instruments, in a SOT-223-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SD | input | Shutdown input: pull low (0 to 0.2V) to turn the regulator off, and pull high (VIN to VIN-0.3V) for normal operation, with survival limits of -0.3V to VIN+0.3V and a typical turn-off delay of 20 µs at 1.5A load. |
| 2 | VIN | power_in | Input supply pin, operating from 2.5V to 7.0V (survival -0.3V to +7.5V), where the minimum VIN is the greater of VOUT(NOM)+VDROPOUT or 2.5V. |
| 3 | VOUT | power_out | Regulated output pin, supplying up to 1.5A DC with output voltage tolerance of ±1.5% at 25°C and ±3.0% over line, load and temperature. |
| 4 | SENSE/ADJ | input | Remote sense pin for the fixed-voltage LP3965 that improves regulation at the load, with the voltage on this pin limited to VOUT+0.3V. |
| 5 | GND | power_in | Ground pin, which carries the ground pin current of typically 5 mA at 1.5A load and 15 µA typical in shutdown mode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-223-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
LP3965EMP-2.5 - Footprint:
Package_TO_SOT_SMD:SOT-223-5 - 3D model: SOT-223-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm nominal SOT height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
lp3965emp-2-5-etched.step/lp3965emp-2-5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp3965emp-2-5.step/lp3965emp-2-5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
9d94020326becc42, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LP3965EMP-2.5
**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-5
LP3965EMP-2.5 from Texas Instruments, in a SOT-223-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SD | input | Shutdown input: pull low (0 to 0.2V) to turn the regulator off, and pull high (VIN to VIN-0.3V) for normal operation, with survival limits of -0.3V to VIN+0.3V and a typical turn-off delay of 20 µs at 1.5A load. |
| 2 | VIN | power_in | Input supply pin, operating from 2.5V to 7.0V (survival -0.3V to +7.5V), where the minimum VIN is the greater of VOUT(NOM)+VDROPOUT or 2.5V. |
| 3 | VOUT | power_out | Regulated output pin, supplying up to 1.5A DC with output voltage tolerance of ±1.5% at 25°C and ±3.0% over line, load and temperature. |
| 4 | SENSE/ADJ | input | Remote sense pin for the fixed-voltage LP3965 that improves regulation at the load, with the voltage on this pin limited to VOUT+0.3V. |
| 5 | GND | power_in | Ground pin, which carries the ground pin current of typically 5 mA at 1.5A load and 15 µA typical in shutdown mode. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-223-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## CAD (KiCad official)
- Symbol: `LP3965EMP-2.5`
- Footprint: `Package_TO_SOT_SMD:SOT-223-5`
- 3D model: SOT-223-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm nominal SOT height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files: `lp3965emp-2-5-etched.step` / `lp3965emp-2-5-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp3965emp-2-5.step` / `lp3965emp-2-5.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lp3965) (35 pp, sha256 `9d94020326becc42`, retrieved 2026-10-08, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lp3965emp-2-5-datasheet.pdf)