main
Ray
Publish 0.1.0
6cbebd4
LP3964EMPX-ADJ
Texas Instruments · Linear Voltage Regulators (LDO) · SOT-223-5
LP3964EMPX-ADJ from Texas Instruments, in a SOT-223-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SD | input | Shutdown input: a CMOS logic low turns off the regulator, it needs a 10-kΩ pullup for proper operation, and it must be tied to IN if unused. |
| 2 | IN | power_in | Input supply, 2.5 V to 7 V operating, requiring at least a 68-µF input capacitor placed close to the pin. |
| 3 | OUT | power_out | Regulated output voltage for up to 800 mA, requiring a minimum 33-µF output capacitor with ESR between 0.2 Ω and 5 Ω. |
| 4 | SENSE/AD | input | Output adjust pin on the ADJ version (adjust pin voltage typically 1.216 V, programmed with a 10-kΩ R1 divider and CF of 68 pF to 100 pF); on fixed versions it is the remote sense pin. |
| 5 | GND | power_in | Ground, to be connected to the external circuit ground in a single-point ground arrangement with the input and output capacitors. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-223-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Supply Voltage (Survival) | -0.3 | 7.5 | V | 4 | |||
| Shutdown Input Voltage (Survival) | -0.3 | V | 4 | ||||
| Output Voltage (Survival) | -0.3 | 7.5 | V | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Input supply voltage (operating) | 2.5 | 7 | V | 4 | |||
| Shutdown input voltage (operating) | -0.3 | V | 4 | ||||
| Maximum operating current (DC) | 0.8 | A | 4 | ||||
| Operating junction temperature | -40 | 125 | °C | 4 | |||
| Output voltage tolerance | VO | -1.5 | 0 | 1.5 | % | 10 mA ≤ IL ≤ 800 mA, VOUT + 1 ≤ VIN ≤ 7 V | 5 |
| Output voltage tolerance | VO | -3 | 3 | % | 10 mA ≤ IL ≤ 800 mA, VOUT + 1 ≤ VIN ≤ 7 V, -40°C ≤ TJ ≤ 125°C | 5 | |
| Adjust pin voltage (ADJ version) | VADJ | 1.198 | 1.216 | 1.234 | V | 10 mA ≤ IL ≤ 800 mA, VOUT + 1.5 V ≤ VIN ≤ 7 V | 5 |
| Adjust pin voltage (ADJ version) | VADJ | 1.18 | 1.253 | V | 10 mA ≤ IL ≤ 800 mA, VOUT + 1.5 V ≤ VIN ≤ 7 V, -40°C ≤ TJ ≤ 125°C | 5 | |
| Dropout voltage | VIN, VOUT | 24 | 30 | mV | IL = 80 mA | 5 | |
| Dropout voltage | VIN, VOUT | 35 | mV | IL = 80 mA, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Dropout voltage | VIN, VOUT | 240 | 300 | mV | IL = 800 mA | 5 | |
| Dropout voltage | VIN, VOUT | 350 | mV | IL = 800 mA, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Ground pin current in normal operation mode | IGND | 3 | 9 | mA | IL = 80 mA | 5 | |
| Ground pin current in normal operation mode | IGND | 10 | mA | IL = 80 mA, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Ground pin current in normal operation mode | IGND | 4 | 14 | mA | IL = 800 mA | 5 | |
| Ground pin current in normal operation mode | IGND | 15 | mA | IL = 800 mA, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Ground pin current in shutdown mode | IGND | 15 | 25 | µA | VSD ≤ 0.2 V | 5 | |
| Ground pin current in shutdown mode | IGND | 75 | µA | VSD ≤ 0.2 V, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Peak output current | IO(PK) | 1.2 | 1.5 | A | See(6) | 5 | |
| Peak output current | IO(PK) | 1.1 | A | See(6), -40°C ≤ TJ ≤ 125°C | 5 | ||
| SDT Shutdown threshold (output low) | SDT | 0 | V | Output = Low | 5 | ||
| SDT Shutdown threshold (output low) | SDT | 0.2 | V | Output = Low, -40°C ≤ TJ ≤ 125°C | 5 | ||
| Thermal resistance junction-to-ambient | RθJA | 65.2 | °C/W | NDC (SOT-223) package column | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 47.2 | °C/W | NDC (SOT-223) package column | 4 | ||
| Junction-to-board thermal resistance | RθJB | 9.9 | °C/W | NDC (SOT-223) package column | 4 | ||
| Junction-to-top characterization parameter | ψJT | 3.4 | °C/W | NDC (SOT-223) package column | 4 | ||
| Junction-to-board characterization parameter | ψJB | 9.7 | °C/W | NDC (SOT-223) package column | 4 |
CAD (KiCad official)
- Symbol:
LP3964EMPX-ADJ - Footprint:
Package_TO_SOT_SMD:SOT-223-5 - 3D model: SOT-223-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm nominal SOT height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
lp3964empx-adj-etched.step/lp3964empx-adj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp3964empx-adj.step/lp3964empx-adj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
510f42662f283baf, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LP3964EMPX-ADJ
**Texas Instruments** · Linear Voltage Regulators (LDO) · SOT-223-5
LP3964EMPX-ADJ from Texas Instruments, in a SOT-223-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SD | input | Shutdown input: a CMOS logic low turns off the regulator, it needs a 10-kΩ pullup for proper operation, and it must be tied to IN if unused. |
| 2 | IN | power_in | Input supply, 2.5 V to 7 V operating, requiring at least a 68-µF input capacitor placed close to the pin. |
| 3 | OUT | power_out | Regulated output voltage for up to 800 mA, requiring a minimum 33-µF output capacitor with ESR between 0.2 Ω and 5 Ω. |
| 4 | SENSE/AD | input | Output adjust pin on the ADJ version (adjust pin voltage typically 1.216 V, programmed with a 10-kΩ R1 divider and CF of 68 pF to 100 pF); on fixed versions it is the remote sense pin. |
| 5 | GND | power_in | Ground, to be connected to the external circuit ground in a single-point ground arrangement with the input and output capacitors. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-223-5 |
| Category | Power Supply Chip |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Supply Voltage (Survival) | | -0.3 | | 7.5 | V | | 4 |
| Shutdown Input Voltage (Survival) | | -0.3 | | | V | | 4 |
| Output Voltage (Survival) | | -0.3 | | 7.5 | V | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Input supply voltage (operating) | | 2.5 | | 7 | V | | 4 |
| Shutdown input voltage (operating) | | -0.3 | | | V | | 4 |
| Maximum operating current (DC) | | | | 0.8 | A | | 4 |
| Operating junction temperature | | -40 | | 125 | °C | | 4 |
| Output voltage tolerance | VO | -1.5 | 0 | 1.5 | % | 10 mA ≤ IL ≤ 800 mA, VOUT + 1 ≤ VIN ≤ 7 V | 5 |
| Output voltage tolerance | VO | -3 | | 3 | % | 10 mA ≤ IL ≤ 800 mA, VOUT + 1 ≤ VIN ≤ 7 V, -40°C ≤ TJ ≤ 125°C | 5 |
| Adjust pin voltage (ADJ version) | VADJ | 1.198 | 1.216 | 1.234 | V | 10 mA ≤ IL ≤ 800 mA, VOUT + 1.5 V ≤ VIN ≤ 7 V | 5 |
| Adjust pin voltage (ADJ version) | VADJ | 1.18 | | 1.253 | V | 10 mA ≤ IL ≤ 800 mA, VOUT + 1.5 V ≤ VIN ≤ 7 V, -40°C ≤ TJ ≤ 125°C | 5 |
| Dropout voltage | VIN, VOUT | | 24 | 30 | mV | IL = 80 mA | 5 |
| Dropout voltage | VIN, VOUT | | | 35 | mV | IL = 80 mA, -40°C ≤ TJ ≤ 125°C | 5 |
| Dropout voltage | VIN, VOUT | | 240 | 300 | mV | IL = 800 mA | 5 |
| Dropout voltage | VIN, VOUT | | | 350 | mV | IL = 800 mA, -40°C ≤ TJ ≤ 125°C | 5 |
| Ground pin current in normal operation mode | IGND | | 3 | 9 | mA | IL = 80 mA | 5 |
| Ground pin current in normal operation mode | IGND | | | 10 | mA | IL = 80 mA, -40°C ≤ TJ ≤ 125°C | 5 |
| Ground pin current in normal operation mode | IGND | | 4 | 14 | mA | IL = 800 mA | 5 |
| Ground pin current in normal operation mode | IGND | | | 15 | mA | IL = 800 mA, -40°C ≤ TJ ≤ 125°C | 5 |
| Ground pin current in shutdown mode | IGND | | 15 | 25 | µA | VSD ≤ 0.2 V | 5 |
| Ground pin current in shutdown mode | IGND | | | 75 | µA | VSD ≤ 0.2 V, -40°C ≤ TJ ≤ 125°C | 5 |
| Peak output current | IO(PK) | 1.2 | 1.5 | | A | See(6) | 5 |
| Peak output current | IO(PK) | 1.1 | | | A | See(6), -40°C ≤ TJ ≤ 125°C | 5 |
| SDT Shutdown threshold (output low) | SDT | | | 0 | V | Output = Low | 5 |
| SDT Shutdown threshold (output low) | SDT | | | 0.2 | V | Output = Low, -40°C ≤ TJ ≤ 125°C | 5 |
| Thermal resistance junction-to-ambient | RθJA | | 65.2 | | °C/W | NDC (SOT-223) package column | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 47.2 | | °C/W | NDC (SOT-223) package column | 4 |
| Junction-to-board thermal resistance | RθJB | | 9.9 | | °C/W | NDC (SOT-223) package column | 4 |
| Junction-to-top characterization parameter | ψJT | | 3.4 | | °C/W | NDC (SOT-223) package column | 4 |
| Junction-to-board characterization parameter | ψJB | | 9.7 | | °C/W | NDC (SOT-223) package column | 4 |
## CAD (KiCad official)
- Symbol: `LP3964EMPX-ADJ`
- Footprint: `Package_TO_SOT_SMD:SOT-223-5`
- 3D model: SOT-223-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm nominal SOT height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files: `lp3964empx-adj-etched.step` / `lp3964empx-adj-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp3964empx-adj.step` / `lp3964empx-adj.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lp3964empx-adj.pdf) (33 pp, sha256 `510f42662f283baf`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lp3964empx-adj-datasheet.pdf)