component
LP3964EMPX-2.5
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownLP3964EMPX-2.5
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-5
LP3964EMPX-2.5 from Texas Instruments, in a SOT-223-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SD | input | Shutdown logic input (active high); must be pulled high through 10-kΩ resistor for normal operation per typical application circuit. |
| 2 | IN | input | Input supply voltage, operating range 2.5 V to 7 V minimum. |
| 3 | GND | power_in | Ground reference; typical ground pin current is 4 mA at 800 mA load current. |
| 4 | OUT | output | Regulated output voltage, maximum 0.8 A DC output current, ±1.5% accuracy at room temperature, typical ultra-low dropout of 240 mV at 800 mA load. |
| 5 | SENSE/AD | input | Remote sense input for voltage feedback at remote loads or output voltage adjust input for adjustable output voltage versions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-223-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
LP3964EMPX-2.5 - Footprint:
Package_TO_SOT_SMD:SOT-223-5 - 3D model: SOT-223-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm nominal SOT height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
lp3964empx-2-5-etched.step/lp3964empx-2-5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp3964empx-2-5.step/lp3964empx-2-5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
84dbca76243c9a35, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).