main
Ray
Publish 0.1.0
6eaf618
LP38858S-1.2
Texas Instruments · Linear Voltage Regulators (LDO) · TO-263-5
LP38858S-1.2 from Texas Instruments, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SS | passive | Soft-start capacitor connection that slows the rise time of VOUT at turn-on; typical CSS is 1 nF to 100 nF and no other components should be connected to this pin. |
| 2 | IN | power_in | Unregulated voltage input pin; VIN must be at least VOUT + VDO and no higher than VBIAS. |
| 3 | GND | power_in | Ground pin; the CSS capacitor must return to this device ground pin on a clean ground path. |
| 4 | OUT | power_out | Regulated output voltage pin; the output capacitor must be located less than 1 cm from this pin, and a minimum of 10 µF ceramic is required for stability. |
| 5 | BIAS | power_in | Supply for the internal control and reference circuitry and N-MOS gate drive; it must be within 3.0 V to 5.5 V and needs a bias capacitor of at least 1 µF. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-263-5 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature Soldering | 260 | °C | 5 seconds | 2 | |||
| ESD Rating Human Body Model | -2 | 2 | kV | Human Body Model | 2 | ||
| VIN Supply Voltage (Survival) | VIN | -0.3 | 6 | V | 2 | ||
| VBIAS Supply Voltage (Survival) | VBIAS | -0.3 | 6 | V | 2 | ||
| VSS Soft-Start Voltage (Survival) | VSS | -0.3 | 6 | V | 2 | ||
| VOUT Voltage (Survival) | VOUT | -0.3 | 6 | V | 2 | ||
| Junction Temperature (absolute maximum) | -40 | 150 | °C | 2 | |||
| VBIAS Supply Voltage (operating) | VBIAS | 3 | 5.5 | V | 3 | ||
| Output Current (operating) | IOUT | 0 | 1.5 | A | 3 | ||
| Junction Temperature Range (operating) | -40 | 125 | °C | 3 | |||
| VOUT Accuracy (TJ = 25°C) | VOUT | -1 | 0 | 1 | % | VOUT(NOM) + 1V ≤ VIN ≤ VBIAS, 3.0V ≤ VBIAS ≤ 5.5V, 10 mA ≤ IOUT ≤ 1.5A | 3 |
| VOUT Accuracy (0°C ≤ TJ ≤ +125°C) | VOUT | -2 | 0 | 2 | % | VOUT(NOM) + 1V ≤ VIN ≤ VBIAS, 3.0V ≤ VBIAS ≤ 5.5V, 10 mA ≤ IOUT ≤ 1.5A, 0°C ≤ TJ ≤ +125°C | 3 |
| VOUT Accuracy (-40°C ≤ TJ ≤ +125°C) | VOUT | -3 | 3 | % | VOUT(NOM) + 1V ≤ VIN ≤ VBIAS, 3.0V ≤ VBIAS ≤ 5.5V, 10 mA ≤ IOUT ≤ 1.5A | 3 | |
| Dropout Voltage (TJ = 25°C) | VDO | 130 | 165 | mV | IOUT = 1.5A | 3 | |
| Dropout Voltage (over TJ range) | VDO | 180 | mV | IOUT = 1.5A | 3 | ||
| Quiescent Current from VIN Supply, LP38858-1.2 (TJ = 25°C) | IGND(IN) | 11 | 12 | mA | 10 mA ≤ IOUT ≤ 1.5A | 3 | |
| Quiescent Current from VIN Supply, LP38858-1.2 (over TJ range) | IGND(IN) | 15 | mA | 10 mA ≤ IOUT ≤ 1.5A | 3 | ||
| Quiescent Current from VBIAS Supply (TJ = 25°C) | IGND(BIAS) | 3 | 3.8 | mA | 10 mA ≤ IOUT ≤ 1.5A | 3 | |
| Quiescent Current from VBIAS Supply (over TJ range) | IGND(BIAS) | 4.5 | mA | 10 mA ≤ IOUT ≤ 1.5A | 3 | ||
| UVLO Threshold (TJ = 25°C) | UVLO | 2.2 | 2.45 | 2.7 | V | VBIAS rising until device is functional | 3 |
| UVLO Threshold (over TJ range) | UVLO | 2 | 2.9 | V | VBIAS rising until device is functional | 3 | |
| UVLO Hysteresis (TJ = 25°C) | UVLO(HYS) | 60 | 150 | 300 | mV | VBIAS falling from UVLO threshold until device is non-functional | 3 |
| UVLO Hysteresis (over TJ range) | UVLO(HYS) | 50 | 350 | mV | VBIAS falling from UVLO threshold until device is non-functional | 3 | |
| Soft-Start internal resistance, LP38858-1.2 | rSS | 13.5 | 16 | 18.5 | kΩ | 3 | |
| Thermal Resistance Junction to Ambient, DDPAK/TO-263-5 | θJ-A | 60 | °C/W | DDPAK/TO-263-5 package | 4 | ||
| Thermal Resistance Junction to Case, DDPAK/TO-263-5 | θJ-C | 3 | °C/W | DDPAK/TO-263-5 package | 4 |
CAD (KiCad official)
- Symbol:
LP38858S-1.2 - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
lp38858s-1-2-etched.step/lp38858s-1-2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp38858s-1-2.step/lp38858s-1-2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (22 pp, sha256
228c8d873bab51f9, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LP38858S-1.2
**Texas Instruments** · Linear Voltage Regulators (LDO) · TO-263-5
LP38858S-1.2 from Texas Instruments, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SS | passive | Soft-start capacitor connection that slows the rise time of VOUT at turn-on; typical CSS is 1 nF to 100 nF and no other components should be connected to this pin. |
| 2 | IN | power_in | Unregulated voltage input pin; VIN must be at least VOUT + VDO and no higher than VBIAS. |
| 3 | GND | power_in | Ground pin; the CSS capacitor must return to this device ground pin on a clean ground path. |
| 4 | OUT | power_out | Regulated output voltage pin; the output capacitor must be located less than 1 cm from this pin, and a minimum of 10 µF ceramic is required for stability. |
| 5 | BIAS | power_in | Supply for the internal control and reference circuitry and N-MOS gate drive; it must be within 3.0 V to 5.5 V and needs a bias capacitor of at least 1 µF. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-263-5 |
| Category | Power Supply Chip |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Lead Temperature Soldering | | | | 260 | °C | 5 seconds | 2 |
| ESD Rating Human Body Model | | -2 | | 2 | kV | Human Body Model | 2 |
| VIN Supply Voltage (Survival) | VIN | -0.3 | | 6 | V | | 2 |
| VBIAS Supply Voltage (Survival) | VBIAS | -0.3 | | 6 | V | | 2 |
| VSS Soft-Start Voltage (Survival) | VSS | -0.3 | | 6 | V | | 2 |
| VOUT Voltage (Survival) | VOUT | -0.3 | | 6 | V | | 2 |
| Junction Temperature (absolute maximum) | | -40 | | 150 | °C | | 2 |
| VBIAS Supply Voltage (operating) | VBIAS | 3 | | 5.5 | V | | 3 |
| Output Current (operating) | IOUT | 0 | | 1.5 | A | | 3 |
| Junction Temperature Range (operating) | | -40 | | 125 | °C | | 3 |
| VOUT Accuracy (TJ = 25°C) | VOUT | -1 | 0 | 1 | % | VOUT(NOM) + 1V ≤ VIN ≤ VBIAS, 3.0V ≤ VBIAS ≤ 5.5V, 10 mA ≤ IOUT ≤ 1.5A | 3 |
| VOUT Accuracy (0°C ≤ TJ ≤ +125°C) | VOUT | -2 | 0 | 2 | % | VOUT(NOM) + 1V ≤ VIN ≤ VBIAS, 3.0V ≤ VBIAS ≤ 5.5V, 10 mA ≤ IOUT ≤ 1.5A, 0°C ≤ TJ ≤ +125°C | 3 |
| VOUT Accuracy (-40°C ≤ TJ ≤ +125°C) | VOUT | -3 | | 3 | % | VOUT(NOM) + 1V ≤ VIN ≤ VBIAS, 3.0V ≤ VBIAS ≤ 5.5V, 10 mA ≤ IOUT ≤ 1.5A | 3 |
| Dropout Voltage (TJ = 25°C) | VDO | | 130 | 165 | mV | IOUT = 1.5A | 3 |
| Dropout Voltage (over TJ range) | VDO | | | 180 | mV | IOUT = 1.5A | 3 |
| Quiescent Current from VIN Supply, LP38858-1.2 (TJ = 25°C) | IGND(IN) | | 11 | 12 | mA | 10 mA ≤ IOUT ≤ 1.5A | 3 |
| Quiescent Current from VIN Supply, LP38858-1.2 (over TJ range) | IGND(IN) | | | 15 | mA | 10 mA ≤ IOUT ≤ 1.5A | 3 |
| Quiescent Current from VBIAS Supply (TJ = 25°C) | IGND(BIAS) | | 3 | 3.8 | mA | 10 mA ≤ IOUT ≤ 1.5A | 3 |
| Quiescent Current from VBIAS Supply (over TJ range) | IGND(BIAS) | | | 4.5 | mA | 10 mA ≤ IOUT ≤ 1.5A | 3 |
| UVLO Threshold (TJ = 25°C) | UVLO | 2.2 | 2.45 | 2.7 | V | VBIAS rising until device is functional | 3 |
| UVLO Threshold (over TJ range) | UVLO | 2 | | 2.9 | V | VBIAS rising until device is functional | 3 |
| UVLO Hysteresis (TJ = 25°C) | UVLO(HYS) | 60 | 150 | 300 | mV | VBIAS falling from UVLO threshold until device is non-functional | 3 |
| UVLO Hysteresis (over TJ range) | UVLO(HYS) | 50 | | 350 | mV | VBIAS falling from UVLO threshold until device is non-functional | 3 |
| Soft-Start internal resistance, LP38858-1.2 | rSS | 13.5 | 16 | 18.5 | kΩ | | 3 |
| Thermal Resistance Junction to Ambient, DDPAK/TO-263-5 | θJ-A | | 60 | | °C/W | DDPAK/TO-263-5 package | 4 |
| Thermal Resistance Junction to Case, DDPAK/TO-263-5 | θJ-C | | 3 | | °C/W | DDPAK/TO-263-5 package | 4 |
## CAD (KiCad official)
- Symbol: `LP38858S-1.2`
- Footprint: `Package_TO_SOT_SMD:TO-263-5_TabPin6`
- 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files: `lp38858s-1-2-etched.step` / `lp38858s-1-2-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp38858s-1-2.step` / `lp38858s-1-2.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lp38858) (22 pp, sha256 `228c8d873bab51f9`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lp38858s-1-2-datasheet.pdf)