component
LP38852S-ADJ
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-263-7. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLP38852S-ADJ
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-263-7
LP38852S-ADJ from Texas Instruments, in a TO-263-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SS | output | Soft-start capacitor connection used to control the rise time of VOUT at turn-on. |
| 2 | EN | input | Device enable: High = On, Low = Off; the VEN voltage range is 0 V to VBIAS. |
| 3 | IN | input | Unregulated voltage input; VIN cannot exceed either VBIAS or 4.5 V, whichever is lower. |
| 4 | GND | power_in | Ground. |
| 5 | ADJ | output | Feedback connection to set the output voltage, adjustable from 0.8 V to 1.8 V. |
| 6 | OUT | output | Regulated output voltage, adjustable from 0.8 V to 1.8 V. |
| 7 | BIAS | input | Supply for the internal control and reference circuitry; VBIAS is 3 V to 5.5 V for VOUT of 0.8 V to 1.2 V and 4.5 V to 5.5 V for VOUT above 1.2 V up to 1.8 V. |
| 8 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-263-7 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LP38852S-ADJ - Footprint:
Package_TO_SOT_SMD:TO-263-7_TabPin8 - 3D model: TO-263-7 (KiCad packages3D, STEP)
- 3D model files:
lp38852s-adj-etched.step/lp38852s-adj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp38852s-adj.step/lp38852s-adj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (35 pp, sha256
353748b75e3e4985, retrieved 2026-10-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).