component
LP3874EMP-3.3
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
LP3874EMP-3.3
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-5
LP3874EMP-3.3 from Texas Instruments, in a SOT-223-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SD | input | Shutdown input; the device is in shutdown with about 10 nA quiescent current when SD is pulled low, and the pin is rated from -0.3 V to 7 V in recommended operation (7.5 V survival). |
| 2 | IN | power_in | Input voltage pin; the supply must be 2.5 V to 7 V and at least VOUT(NOM) + VDROPOUT, or 2.5 V, whichever is greater. |
| 3 | OUT | power_out | Regulated output voltage pin; survival limit is -0.3 V to 6 V, and the output is short-circuit protected at up to 0.8 A DC. |
| 4 | SENSE | input | Remote voltage sense input that improves load regulation at remote loads; its maximum voltage is limited to VOUT. |
| 5 | GND | power_in | Ground pin for the regulator. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-223-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
LP3874EMP-3.3 - Footprint:
Package_TO_SOT_SMD:SOT-223-5 - 3D model: SOT-223-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm nominal SOT height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
lp3874emp-3-3-etched.step/lp3874emp-3-3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp3874emp-3-3.step/lp3874emp-3-3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (27 pp, sha256
b85de2cb47e9b1e2, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LP3874EMP-3.3
**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-5
LP3874EMP-3.3 from Texas Instruments, in a SOT-223-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SD | input | Shutdown input; the device is in shutdown with about 10 nA quiescent current when SD is pulled low, and the pin is rated from -0.3 V to 7 V in recommended operation (7.5 V survival). |
| 2 | IN | power_in | Input voltage pin; the supply must be 2.5 V to 7 V and at least VOUT(NOM) + VDROPOUT, or 2.5 V, whichever is greater. |
| 3 | OUT | power_out | Regulated output voltage pin; survival limit is -0.3 V to 6 V, and the output is short-circuit protected at up to 0.8 A DC. |
| 4 | SENSE | input | Remote voltage sense input that improves load regulation at remote loads; its maximum voltage is limited to VOUT. |
| 5 | GND | power_in | Ground pin for the regulator. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-223-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## CAD (KiCad official)
- Symbol: `LP3874EMP-3.3`
- Footprint: `Package_TO_SOT_SMD:SOT-223-5`
- 3D model: SOT-223-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm nominal SOT height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files: `lp3874emp-3-3-etched.step` / `lp3874emp-3-3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp3874emp-3-3.step` / `lp3874emp-3-3.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lp3874) (27 pp, sha256 `b85de2cb47e9b1e2`, retrieved 2026-10-11, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lp3874emp-3-3-datasheet.pdf)