component
LP38693MP-3.3
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 2d ago |
| viewers | 4d ago |
| lp38693mp-3-3-etched.fit.json | 3d ago |
| lp38693mp-3-3-etched.glb | 2d ago |
| lp38693mp-3-3-etched.step | 2d ago |
| lp38693mp-3-3.glb | 4d ago |
| lp38693mp-3-3.kicad_mod | 4d ago |
| lp38693mp-3-3.kicad_sym | 4d ago |
| lp38693mp-3-3.lbr | 4d ago |
| lp38693mp-3-3.step | 4d ago |
| package.json | 4d ago |
| page.json | 4d ago |
| README.md | 4d ago |
LP38693MP-3.3
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-5
LP38693MP-3.3 from Texas Instruments, in a SOT-223-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable input for the LP38693 (SOT-223 package); pulling the pin high or low turns the regulator output on or off. The pin must be below the VEN(OFF) threshold of 0.4 V (max, full temp range) to disable, and above VEN(ON) (1.8 V at VIN=4V, 3.0 V at VIN=6V, 4.0 V at VIN=10V, full temp range) to fully enable; enable-pin leakage is -1 µA to 1 µA (typ 0.001 µA) at VEN=0V or 10V. |
| 2 | NC | unconnected | No internal connection; this pin is not bonded to the die. |
| 3 | OUT | power_out | Regulated output voltage pin (3.3 V nominal for this -3.3 variant, ±2% accuracy at 25°C, ±4% over the full operating temperature range), rated for load currents from 100 µA to 0.5 A with a typical dropout of 65 mV at 100 mA and 330 mV at 500 mA (VO=3.3V). |
| 4 | IN | power_in | Input supply voltage to the regulator; recommended operating range is 2.7 V to 10 V, with an absolute maximum rating of -0.3 V to 12 V with respect to GND. |
| 5 | GND | power_in | Circuit ground for the regulator; for the SOT-223 package this pin is thermally connected to the die and functions as a heat sink when soldered to a large copper plane. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-223-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
LP38693MP-3.3 - Footprint:
Package_TO_SOT_SMD:SOT-223-5 - 3D model: SOT-223-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm nominal SOT height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
lp38693mp-3-3-etched.step/lp38693mp-3-3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp38693mp-3-3.step/lp38693mp-3-3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
a1db9ab3d09c908b, retrieved 2026-10-01, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).