← Commit history

lp38692mp-adj: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·bf84231ace · ·parent 58945ea
2 files changed +89−9
package.json+47−7
@@ -69,31 +69,31 @@         "number": "1",         "name": "ADJ",         "type": "passive",-        "description": "Adjust pin; sets regulated output voltage via external resistors R1 and R2 per VOUT = VADJ \u00d7 (1 + R1/R2); VADJ = 1.25 V typical with \u00b12.0% accuracy at 25 \u00b0C; ADJ input leakage current \u2264 \u00b1100 nA (VIN = 10 V)."+        "description": "Adjust pin; sets regulated output voltage via external resistors R1 and R2 per VOUT = VADJ × (1 + R1/R2); VADJ = 1.25 V typical with ±2.0% accuracy at 25 °C; ADJ input leakage current ≤ ±100 nA (VIN = 10 V)."       },       {         "number": "2",         "name": "VOUT",         "type": "power_out",-        "description": "Regulated output voltage; adjustable range 1.25 V to 9 V; rated 1 A continuous output; dropout voltage 450 mV typical (800 mV max) at IL = 1 A, VO = 5 V; requires \u2265 1 \u00b5F ceramic output capacitor within 1 cm for loop stability."+        "description": "Regulated output voltage; adjustable range 1.25 V to 9 V; rated 1 A continuous output; dropout voltage 450 mV typical (800 mV max) at IL = 1 A, VO = 5 V; requires ≥ 1 µF ceramic output capacitor within 1 cm for loop stability."       },       {         "number": "3",         "name": "VEN",         "type": "input",-        "description": "Enable input (LP38692-ADJ only); output turns OFF when VEN \u2264 0.4 V (quiescent current falls to 1 \u00b5A max); output turns ON when VEN \u2265 1.8 V at VIN = 4 V, \u2265 3.0 V at VIN = 6 V, \u2265 4.0 V at VIN = 10 V; no internal pull-up or pull-down; must be actively or passively terminated; pin leakage \u2264 \u00b11 \u00b5A."+        "description": "Enable input (LP38692-ADJ only); output turns OFF when VEN ≤ 0.4 V (quiescent current falls to 1 µA max); output turns ON when VEN ≥ 1.8 V at VIN = 4 V, ≥ 3.0 V at VIN = 6 V, ≥ 4.0 V at VIN = 10 V; no internal pull-up or pull-down; must be actively or passively terminated; pin leakage ≤ ±1 µA."       },       {         "number": "4",         "name": "GND",         "type": "power_in",-        "description": "Circuit ground reference; large exposed tab in SOT-223 package, thermally bonded to die substrate; serves as heatsink connection when soldered to copper area; \u03b8J-A \u2248 125 \u00b0C/W (minimum copper area) to 70 \u00b0C/W (1 sq. in. copper area)."+        "description": "Circuit ground reference; large exposed tab in SOT-223 package, thermally bonded to die substrate; serves as heatsink connection when soldered to copper area; θJ-A ≈ 125 °C/W (minimum copper area) to 70 °C/W (1 sq. in. copper area)."       },       {         "number": "5",         "name": "VIN",         "type": "power_in",-        "description": "Input supply voltage; operating range 2.7 V to 10 V, absolute maximum 12 V with respect to GND; quiescent current 55 \u00b5A typical (100 \u00b5A max) at full load; requires \u2265 1 \u00b5F ceramic input capacitor located within 1 cm of pin."+        "description": "Input supply voltage; operating range 2.7 V to 10 V, absolute maximum 12 V with respect to GND; quiescent current 55 µA typical (100 µA max) at full load; requires ≥ 1 µF ceramic input capacitor located within 1 cm of pin."       }     ],     "provenance": {@@ -130,6 +130,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lp38692mp-adj.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.46,+          6.7,+          1.45+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "695a46f2c2227d97fed04b1342d8c072132891ffbfd97af3a43e31f7f2c3cfb8",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lp38692mp-adj-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.46,+          6.7,+          1.45+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "a3a6ed1285d80de270b21bd94cbf2254edc421046530135c62f4a2eb0dad298f",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -115,7 +115,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "lp38692mp-adj.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.46,+          6.7,+          1.45+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "695a46f2c2227d97fed04b1342d8c072132891ffbfd97af3a43e31f7f2c3cfb8",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lp38692mp-adj-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.46,+          6.7,+          1.45+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "a3a6ed1285d80de270b21bd94cbf2254edc421046530135c62f4a2eb0dad298f",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -162,4 +202,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}