component
LP38692MP-5.0
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
LP38692MP-5.0
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-5
LP38692MP-5.0 from Texas Instruments, in a SOT-223-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable pin allows the device to be turned ON by pulling HIGH above VEN(MIN) threshold or OFF by pulling LOW below VEN(MAX) threshold to control regulator output. |
| 2 | NC | unconnected | No Connection - not documented in datasheet pin function table. |
| 3 | OUT | output | Regulated output voltage with 2.5% tolerance (25°C), supporting 1A output current with dropout voltage of 450mV typical at 1A load for 5V output. |
| 4 | IN | power_in | Input supply voltage to regulator, operating range 2.7V to 10V, maximum 500mA per pin for this package variant. |
| 5 | GND | power_in | Circuit ground for the regulator, thermally connected to die and functions as heat sink when soldered to copper plane in SOT-223 package. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-223-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
LP38692MP-5.0 - Footprint:
Package_TO_SOT_SMD:SOT-223-5 - 3D model: SOT-223-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm nominal SOT height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
lp38692mp-5-0-etched.step/lp38692mp-5-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp38692mp-5-0.step/lp38692mp-5-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
63146748670325d9, retrieved 2026-10-01, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LP38692MP-5.0
**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-5
LP38692MP-5.0 from Texas Instruments, in a SOT-223-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable pin allows the device to be turned ON by pulling HIGH above VEN(MIN) threshold or OFF by pulling LOW below VEN(MAX) threshold to control regulator output. |
| 2 | NC | unconnected | No Connection - not documented in datasheet pin function table. |
| 3 | OUT | output | Regulated output voltage with 2.5% tolerance (25°C), supporting 1A output current with dropout voltage of 450mV typical at 1A load for 5V output. |
| 4 | IN | power_in | Input supply voltage to regulator, operating range 2.7V to 10V, maximum 500mA per pin for this package variant. |
| 5 | GND | power_in | Circuit ground for the regulator, thermally connected to die and functions as heat sink when soldered to copper plane in SOT-223 package. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-223-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## CAD (KiCad official)
- Symbol: `LP38692MP-5.0`
- Footprint: `Package_TO_SOT_SMD:SOT-223-5`
- 3D model: SOT-223-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm nominal SOT height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files: `lp38692mp-5-0-etched.step` / `lp38692mp-5-0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp38692mp-5-0.step` / `lp38692mp-5-0.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lp38692) (36 pp, sha256 `63146748670325d9`, retrieved 2026-10-01, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lp38692mp-5-0-datasheet.pdf)