main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lp3852emp-5-0: viewers · Ray
lp3852emp-5-0-etched.glb Publish 0.1.0 · Ray
lp3852emp-5-0-etched.step lp3852emp-5-0: factory component page (tier=mfr) · Ray
lp3852emp-5-0-hero.glb lp3852emp-5-0: hero GLB from the etched model (keeps the MPN mark) · Ray
lp3852emp-5-0-hero.overlay.json Publish 0.1.0 · Ray
lp3852emp-5-0.glb Publish 0.1.0 · Ray
lp3852emp-5-0.kicad_mod Publish 0.1.0 · Ray
lp3852emp-5-0.kicad_sym Publish 0.1.0 · Ray
lp3852emp-5-0.lbr Publish 0.1.0 · Ray
lp3852emp-5-0.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray

LP3852EMP-5.0

Texas Instruments · Linear Voltage Regulators (LDO) · SOT-223-5

LP3852EMP-5.0 from Texas Instruments, in a SOT-223-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SD input Shutdown input, which must be pulled high through a 10-kΩ pull-up resistor; shutdown input voltage survival is -0.3 V to 7.5 V.
2 IN power_in Input supply, operating from 2.5 V to 7 V with a survival limit of -0.3 V to 7.5 V.
3 OUT power_out Regulated output voltage; output voltage survival is -0.3 V to 6 V, and the output is short-circuit protected.
4 ERROR output ERROR flag that goes low when the output voltage drops 10% below nominal; it must be pulled high through a 10-kΩ resistor or tied to ground if unused, with a maximum voltage of VIN.
5 GND power_in Ground reference pin for the regulator.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-223-5
Category Power Supply Chip
Pins 5

CAD (KiCad official)

  • Symbol: LP3852EMP-5.0
  • Footprint: Package_TO_SOT_SMD:SOT-223-5
  • 3D model: SOT-223-5 (KiCad packages3D, STEP)
  • 3D model files: lp3852emp-5-0-etched.step / lp3852emp-5-0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp3852emp-5-0.step / lp3852emp-5-0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (33 pp, sha256 70f996638bd5e2ad, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF