main
Ray
Publish 0.1.0
41d3d6d
LP38512MRX-ADJ
Texas Instruments · Linear Voltage Regulators (LDO) · SO-8
LP38512MRX-ADJ from Texas Instruments, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output voltage pin; pins 1 and 2 share current and must be connected together. |
| 2 | OUT | power_out | Regulated output voltage pin; pins 1 and 2 share current and must be connected together. |
| 3 | ADJ | input | Feedback input to the internal error amplifier that sets the output voltage via an external R1/R2 divider (VADJ = 500 mV typical). |
| 4 | N/C | unconnected | No internal connection. |
| 5 | GND | power_in | Ground. |
| 6 | EN | input | Enable pin: pull high to enable the output, low to disable it; it has no internal bias and must be tied to the input voltage or actively driven (0 V to 5.5 V). |
| 7 | IN | power_in | Input supply pin (2.25 V to 5.5 V); pins 7 and 8 share current and must be connected together. |
| 8 | IN | power_in | Input supply pin (2.25 V to 5.5 V); pins 7 and 8 share current and must be connected together. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SO-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VADJ Accuracy | VADJ | 495 | 500 | 505 | mV | 2.25V ≤ VIN ≤ 5.5V | 3 |
| VADJ Accuracy | VADJ | 490 | 510 | mV | 10 mA ≤ IOUT ≤ 1.5A | 3 | |
| Dropout Voltage | VDO | 300 | mV | IOUT = 1.5A | 3 | ||
| Ground Pin Current, Output Enabled | IGND | 10 | 15 | mA | IOUT = 10 mA | 4 | |
| Ground Pin Current, Output Enabled | IGND | 10 | 12 | mA | IOUT = 10 mA | 4 | |
| Ground Pin Current, Output Enabled | IGND | 10 | 14 | mA | IOUT = 1.5A | 4 | |
| Ground Pin Current, Output Disabled | IGND | 60 | 110 | µA | VEN = 0.50V | 4 | |
| Ground Pin Current, Output Disabled | IGND | 60 | 100 | µA | VEN = 0.50V | 4 | |
| Enable ON Voltage Threshold | VEN(ON) | 0.9 | 1.2 | 1.5 | V | VEN rising from < VEN(OFF) until VOUT = ON | 4 |
| Enable ON Voltage Threshold | VEN(ON) | 0.8 | 1.6 | V | VEN rising from < VEN(OFF) until VOUT = ON | 4 | |
| Enable OFF Voltage Threshold | VEN(OFF) | 0.6 | 1 | 1.4 | V | VEN falling from > VEN(ON) until VOUT = OFF | 4 |
| Enable OFF Voltage Threshold | VEN(OFF) | 0.5 | 1.5 | V | VEN falling from > VEN(ON) until VOUT = OFF | 4 | |
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Soldering Temperature, SO PowerPad | 260 | °C | 10 s | 3 | |||
| ESD Rating | -2 | 2 | kV | Human body model | 3 | ||
| Input Pin Voltage (Survival) | -0.3 | 6 | V | 3 | |||
| Enable Pin Voltage (Survival) | -0.3 | 6 | V | 3 | |||
| Output Pin Voltage (Survival) | -0.3 | 6 | V | 3 | |||
| ADJ Pin Voltage (Survival) | -0.3 | 6 | V | 3 | |||
| Input Supply Voltage | VIN | 2.25 | 5.5 | V | 3 | ||
| Output Voltage | VOUT | 5 | V | VADJ to 5V | 3 | ||
| Enable Input Voltage | VEN | 0 | 5.5 | V | 3 | ||
| Output Current (DC), lower bound | IOUT | 1 | mA | 3 | |||
| Output Current (DC), upper bound | IOUT | 1.5 | A | 3 | |||
| Junction Temperature | TJ | -40 | 125 | °C | 3 | ||
| Thermal Resistance Junction to Ambient, SO PowerPad | θJ-A | 168 | °C/W | SO PowerPad, two-layer PCB, minimum land area | 4 | ||
| Thermal Resistance Junction to Case, SO PowerPad | θJ-C | 11 | °C/W | SO PowerPad | 4 |
CAD (KiCad official)
- Symbol:
LP38512MRX-ADJ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lp38512mrx-adj-etched.step/lp38512mrx-adj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp38512mrx-adj.step/lp38512mrx-adj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
bbcd0f53f3690742, retrieved 2026-11-09, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LP38512MRX-ADJ
**Texas Instruments** · Linear Voltage Regulators (LDO) · SO-8
LP38512MRX-ADJ from Texas Instruments, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output voltage pin; pins 1 and 2 share current and must be connected together. |
| 2 | OUT | power_out | Regulated output voltage pin; pins 1 and 2 share current and must be connected together. |
| 3 | ADJ | input | Feedback input to the internal error amplifier that sets the output voltage via an external R1/R2 divider (VADJ = 500 mV typical). |
| 4 | N/C | unconnected | No internal connection. |
| 5 | GND | power_in | Ground. |
| 6 | EN | input | Enable pin: pull high to enable the output, low to disable it; it has no internal bias and must be tied to the input voltage or actively driven (0 V to 5.5 V). |
| 7 | IN | power_in | Input supply pin (2.25 V to 5.5 V); pins 7 and 8 share current and must be connected together. |
| 8 | IN | power_in | Input supply pin (2.25 V to 5.5 V); pins 7 and 8 share current and must be connected together. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SO-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VADJ Accuracy | VADJ | 495 | 500 | 505 | mV | 2.25V ≤ VIN ≤ 5.5V | 3 |
| VADJ Accuracy | VADJ | 490 | | 510 | mV | 10 mA ≤ IOUT ≤ 1.5A | 3 |
| Dropout Voltage | VDO | | | 300 | mV | IOUT = 1.5A | 3 |
| Ground Pin Current, Output Enabled | IGND | | 10 | 15 | mA | IOUT = 10 mA | 4 |
| Ground Pin Current, Output Enabled | IGND | | 10 | 12 | mA | IOUT = 10 mA | 4 |
| Ground Pin Current, Output Enabled | IGND | | 10 | 14 | mA | IOUT = 1.5A | 4 |
| Ground Pin Current, Output Disabled | IGND | | 60 | 110 | µA | VEN = 0.50V | 4 |
| Ground Pin Current, Output Disabled | IGND | | 60 | 100 | µA | VEN = 0.50V | 4 |
| Enable ON Voltage Threshold | VEN(ON) | 0.9 | 1.2 | 1.5 | V | VEN rising from < VEN(OFF) until VOUT = ON | 4 |
| Enable ON Voltage Threshold | VEN(ON) | 0.8 | | 1.6 | V | VEN rising from < VEN(OFF) until VOUT = ON | 4 |
| Enable OFF Voltage Threshold | VEN(OFF) | 0.6 | 1 | 1.4 | V | VEN falling from > VEN(ON) until VOUT = OFF | 4 |
| Enable OFF Voltage Threshold | VEN(OFF) | 0.5 | | 1.5 | V | VEN falling from > VEN(ON) until VOUT = OFF | 4 |
| Storage Temperature Range | | -65 | | 150 | °C | | 3 |
| Soldering Temperature, SO PowerPad | | | | 260 | °C | 10 s | 3 |
| ESD Rating | | -2 | | 2 | kV | Human body model | 3 |
| Input Pin Voltage (Survival) | | -0.3 | | 6 | V | | 3 |
| Enable Pin Voltage (Survival) | | -0.3 | | 6 | V | | 3 |
| Output Pin Voltage (Survival) | | -0.3 | | 6 | V | | 3 |
| ADJ Pin Voltage (Survival) | | -0.3 | | 6 | V | | 3 |
| Input Supply Voltage | VIN | 2.25 | | 5.5 | V | | 3 |
| Output Voltage | VOUT | | | 5 | V | VADJ to 5V | 3 |
| Enable Input Voltage | VEN | 0 | | 5.5 | V | | 3 |
| Output Current (DC), lower bound | IOUT | 1 | | | mA | | 3 |
| Output Current (DC), upper bound | IOUT | | | 1.5 | A | | 3 |
| Junction Temperature | TJ | -40 | | 125 | °C | | 3 |
| Thermal Resistance Junction to Ambient, SO PowerPad | θJ-A | | 168 | | °C/W | SO PowerPad, two-layer PCB, minimum land area | 4 |
| Thermal Resistance Junction to Case, SO PowerPad | θJ-C | | 11 | | °C/W | SO PowerPad | 4 |
## CAD (KiCad official)
- Symbol: `LP38512MRX-ADJ`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `lp38512mrx-adj-etched.step` / `lp38512mrx-adj-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp38512mrx-adj.step` / `lp38512mrx-adj.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lp38512-adj) (25 pp, sha256 `bbcd0f53f3690742`, retrieved 2026-11-09, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lp38512mrx-adj-datasheet.pdf)