main
Ray
lp3809-263b3f: laser-etched CAD + chip hero (factory 2.0.0 backfill)
900779b
LP3809-263B3F
LOWPOWER · Supervisor and Reset ICs · SOT-23
LP3809-263B3F from LOWPOWER, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSS | power_in | Ground reference pin. Connect to system GND (0 V). |
| 2 | Vout | output | Voltage-detection output pin. CMOS push-pull output (Nch pull-down and Pch pull-up per block diagram). Drives low when VDD falls below the 2.63V detection threshold and returns high after VDD rises above the threshold plus ~108 mV hysteresis and the 240 ms internal delay expires. Absolute max output voltage -0.3V to 6V; max output current 60 mA. |
| 3 | VDD | power_in | Supply / monitored voltage input pin. Operating range 0.9V to 5.5V; absolute max -0.3V to 6V. This is the voltage being monitored against the 2.63V detection threshold. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOT-23 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
Same part, different packaging or reel option.
LP3809-263B3F
CAD (KiCad official)
- Symbol:
LP3809-263B3F - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
lp3809-263b3f-etched.step/lp3809-263b3f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp3809-263b3f.step/lp3809-263b3f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LOWPOWER datasheet (6 pp, sha256
5c42f5f7a3531785, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LP3809-263B3F
**LOWPOWER** · Supervisor and Reset ICs · SOT-23
LP3809-263B3F from LOWPOWER, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSS | power_in | Ground reference pin. Connect to system GND (0 V). |
| 2 | Vout | output | Voltage-detection output pin. CMOS push-pull output (Nch pull-down and Pch pull-up per block diagram). Drives low when VDD falls below the 2.63V detection threshold and returns high after VDD rises above the threshold plus ~108 mV hysteresis and the 240 ms internal delay expires. Absolute max output voltage -0.3V to 6V; max output current 60 mA. |
| 3 | VDD | power_in | Supply / monitored voltage input pin. Operating range 0.9V to 5.5V; absolute max -0.3V to 6V. This is the voltage being monitored against the 2.63V detection threshold. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOT-23 |
| Category | PMIC |
| Pins | 3 |
## Ordering variants
Same part, different packaging or reel option.
- `LP3809-263B3F`
## CAD (KiCad official)
- Symbol: `LP3809-263B3F`
- Footprint: `Package_TO_SOT_SMD:SOT-23`
- 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files: `lp3809-263b3f-etched.step` / `lp3809-263b3f-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp3809-263b3f.step` / `lp3809-263b3f.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [LOWPOWER datasheet](docs/lp3809-263b3f-datasheet.pdf) (6 pp, sha256 `5c42f5f7a3531785`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lp3809-263b3f-datasheet.pdf)