main
Ray Publish 0.1.1 5b1c95e
{
  "schema_version": 1,
  "type": "component",
  "slug": "lp3470im5-3-08",
  "title": "LP3470IM5-3.08",
  "brief": "Texas Instruments Monitors & Reset Circuits, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power supply chip",
    "lp3470im5-3.08",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "LP3470IM5-3.08",
    "manufacturer": "Texas Instruments",
    "package": "SOT-23-5",
    "pin_count": 5,
    "category": "Power Supply Chip",
    "subcategory": "Monitors & Reset Circuits",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lp3470.pdf",
    "parts": {
      "symbol": "lp3470im5-3-08.kicad_sym",
      "footprint": "lp3470im5-3-08.kicad_mod",
      "model_3d": "lp3470im5-3-08-hero.glb",
      "model_3d_plain": "lp3470im5-3-08.glb",
      "model_3d_step": "lp3470im5-3-08-etched.step",
      "model_3d_step_plain": "lp3470im5-3-08.step",
      "lbr": "lp3470im5-3-08.lbr"
    },
    "distributor_links": {
      "lcsc": "C3686532",
      "digikey": "LP3470IM5-3.08TR-ND",
      "mouser": "926-LP3470IM5-308"
    },
    "distributor_check": {
      "checked_at": "2026-11-02T16:54:22Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LP3470IM5-3.08TR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "926-LP3470IM5-308",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SRT",
        "type": "output",
        "description": "Set reset time-out pin: connect a capacitor to ground to set tRP = 2000 × C1 (C1 in µF, tRP in ms), or leave it floating if no delay is needed."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin."
      },
      {
        "number": "3",
        "name": "VCC1",
        "type": "input",
        "description": "Always connect to pin VCC (pin 4)."
      },
      {
        "number": "4",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage input (0.5 V to 5.5 V operating) and reset threshold monitor input."
      },
      {
        "number": "5",
        "name": "Reset",
        "type": "output",
        "description": "Open-drain, active-low reset output that requires an external pullup resistor and goes low when VCC drops below the reset threshold VRTH."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pinout is taken from the DBV (SOT-23-5) package drawing and pin table, which apply to the LP3470"
        ],
        "pages_sent": 23,
        "cost_usd": 0.0216,
        "at": "2026-11-02T16:54:14"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/lp3470.pdf",
        "pages": 23,
        "sha256": "99e6639f3b9e22d8",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lp3470im5-3-08.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",
        "checked": "2026-11-02",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lp3470im5-3-08-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "208d741154be10c714568de3fb9c2c7c3ca0125388ce4fc082d1d2bd5ab657d5",
        "checked": "2026-11-02",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "SOT-23-5",
      "Category": "Power Supply Chip",
      "Pins": "5"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "99e6639f3b9e22d8cac28925b6e9b12acaecc76e65c82d8bc32f47e96b0c3106",
      "rows": [
        {
          "name": "VCC voltage",
          "symbol": "VCC",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 6,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Reset voltage",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 6,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Output current (Reset)",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 10,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Power dissipation",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "mW",
          "min": null,
          "typ": null,
          "max": 300,
          "conditions": "TA = 25°C",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Lead temperature (soldering, 5 sec)",
          "symbol": "",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 260,
          "conditions": "soldering, 5 sec",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Junction temperature",
          "symbol": "TJMAX",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 125,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Storage temperature",
          "symbol": "Tstg",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "VCC operating voltage",
          "symbol": "VCC",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 0.5,
          "typ": null,
          "max": 5.5,
          "conditions": "",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Operating temperature (LP3470I)",
          "symbol": "TA",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 85,
          "conditions": "LP3470I",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "Junction-to-ambient thermal resistance",
          "symbol": "RθJA",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 171,
          "max": null,
          "conditions": "DBV (SOT-23) 5 pins",
          "source_page": 4,
          "source": "datasheet"
        },
        {
          "name": "VCC operating voltage",
          "symbol": "VCC",
          "kind": "electrical",
          "unit": "V",
          "min": 0.5,
          "typ": null,
          "max": 5.5,
          "conditions": "TJ = –20°C to 85°C",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "VCC supply current",
          "symbol": "ICC",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": null,
          "max": 30,
          "conditions": "VCC = 4.5 V, TJ = –20°C to 85°C",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Hysteresis voltage",
          "symbol": "VHYST",
          "kind": "electrical",
          "unit": "mV",
          "min": 15,
          "typ": null,
          "max": 65,
          "conditions": "TJ = –20°C to 85°C",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "VCC to reset delay",
          "symbol": "tPD",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 300,
          "conditions": "VCC falling at 1 mV/µs, TJ = –20°C to 85°C",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Reset time-out period",
          "symbol": "tRP",
          "kind": "timing",
          "unit": "ms",
          "min": 1,
          "typ": null,
          "max": 3.5,
          "conditions": "C1 = 1 nF, TJ = –20°C to 85°C",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Reset output voltage low",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.1,
          "conditions": "VCC = 0.5 V, IOL = 30 µA, TJ = –20°C to 85°C",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Reset output voltage low",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.4,
          "conditions": "VCC = VRTH − 100 mV, IOL = 4 mA, TJ = –20°C to 85°C",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "External pullup resistor",
          "symbol": "R1",
          "kind": "recommended_operating",
          "unit": "kΩ",
          "min": 0.68,
          "typ": 20,
          "max": 68,
          "conditions": "",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Reset output leakage current",
          "symbol": "ILEAK",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": null,
          "max": 1,
          "conditions": "TJ = 25°C",
          "source_page": 5,
          "source": "datasheet"
        },
        {
          "name": "Reset output leakage current",
          "symbol": "ILEAK",
          "kind": "electrical",
          "unit": "µA",
          "min": null,
          "typ": null,
          "max": 6,
          "conditions": "TJ = –20°C to 85°C",
          "source_page": 5,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lp3470im5-3.08"
  ],
  "discovery_pitch": "LP3470IM5-3.08 (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lp3470im5-3-08.kicad_sym",
    "lp3470im5-3-08.kicad_mod",
    "lp3470im5-3-08.glb",
    "lp3470im5-3-08.step",
    "lp3470im5-3-08.lbr",
    "docs/hero.png",
    "docs/lp3470im5-3-08-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lp3470im5-3-08-hero.glb",
    "lp3470im5-3-08-hero.overlay.json",
    "lp3470im5-3-08-etched.glb",
    "lp3470im5-3-08-etched.step"
  ],
  "visibility": "public",
  "description": "Texas Instruments Monitors & Reset Circuits, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "org": "adom"
}