Generated by kicad-footprint-generator · KiCad file format 20260206
LP3470A275DBVR
Texas Instruments · Monitors & Reset Circuits · SOT-23-5
LP3470A275DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SRT | input | Set reset time-out pin: connect a capacitor to ground to set the reset time-out period with tD = 619 × CSRT (CSRT in µF, tD in ms), or leave floating for the minimum delay. |
| 2 | GND | power_in | Ground pin. |
| 3 | VCC1 | input | Can be connected to VCC or left floating; it must not be connected to GND. |
| 4 | VCC | power_in | Supply voltage and reset threshold monitor input, specified from 0.95 V to 10 V. |
| 5 | RESET | output | Open-drain, active-low reset output that needs an external pullup; it goes low when VCC drops below VIT-, stays low for tD after VCC exceeds VIT- + VHYS, then goes high. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input supply voltage | VCC | 0.95 | 10 | V | 6 | ||
| Negative-going input threshold accuracy | VIT- | -1.5 | 1 | 1.5 | % | -40°C to 125°C | 6 |
| Hysteresis on VIT- pin | VHYS | 75 | 100 | 125 | mV | VIT- = 2.64 V to 2.93 V | 6 |
| Low level output voltage | VOL | 200 | mV | 1.5 V < VCC < 5 V, VCC < VIT-, IOUT(Sink) = 2 mA | 6 | ||
| Open-drain output leakage current | Ilkg(OD) | 90 | nA | RESET pin in High Impedance, VCC = VRESET = 5.5 V, VIT+ < VCC | 6 | ||
| Power on Reset Voltage | VPOR | 950 | mV | VOL(max) = 0.2 V, IOUT (Sink) = 5.6 uA | 6 | ||
| Supply current into VCC pin | ICC | 0.3 | 1 | µA | VCC = 0.95 V < VCC < 10 V, VCC > VIT+, TA = -40°C to 125°C | 6 | |
| SRT pin internal resistance | RSRT | 350 | 500 | 650 | kΩ | 6 | |
| Propagation detect delay for VCC falling below VIT- | tP_HL | 15 | 30 | µs | VCC = VIT+ to (VIT-) - 10% | 6 | |
| Reset time delay | tD | 50 | µs | SRT pin = open, VCC = (VIT- -1V) to (VIT+ +1V) | 6 | ||
| Reset time delay | tD | 6.2 | ms | SRT pin = 10 nF | 6 | ||
| Reset time delay | tD | 619 | ms | SRT pin = 1 µF | 6 | ||
| Glitch immunity VIT- | tGI_VIT- | 10 | µs | VIT- 5% VIT- overdrive | 6 | ||
| Input supply voltage (absolute maximum VCC) | VCC | -0.3 | 12 | V | 5 | ||
| RESET pin voltage (absolute maximum) | RESET | -0.3 | 12 | V | 5 | ||
| SRT pin voltage (absolute maximum) | SRT | -0.3 | 5.5 | V | 5 | ||
| RESET pin current | IRESET | -70 | 70 | mA | 5 | ||
| Operating junction temperature | TJ | -40 | 150 | °C | 5 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Human body model ESD | V(ESD) | -2000 | 2000 | V | HBM, per ANSI/ESDA/JEDEC JS-001 | 5 | |
| Charged device model ESD | V(ESD) | -750 | 750 | V | CDM, per JEDEC JESD22-C101 | 5 | |
| VRESET RESET pin voltage | VRESET | 0 | 10 | V | 5 | ||
| RESET pin current | IRESET | 0 | 5 | mA | 5 | ||
| Junction temperature (free air temperature) | TJ | -40 | 125 | °C | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 187.5 | °C/W | DBV (SOT23-5) package | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 109.2 | °C/W | DBV (SOT23-5) package | 5 | ||
| Junction-to-board thermal resistance | RθJB | 92.8 | °C/W | DBV (SOT23-5) package | 5 | ||
| Junction-to-top characterization parameter | ψJT | 35.4 | °C/W | DBV (SOT23-5) package | 5 | ||
| Junction-to-board characterization parameter | ψJB | 92.5 | °C/W | DBV (SOT23-5) package | 5 |
CAD (KiCad official)
- Symbol:
LP3470A275DBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lp3470a275dbvr-etched.step/lp3470a275dbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp3470a275dbvr.step/lp3470a275dbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (23 pp, sha256
7803aa4fb40f2458, retrieved 2026-10-28, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).