main
Ray
Publish 0.1.0
2cc39a8
LP3351SOF
LOWPOWER · LED Drivers · SOP-8-EP
LP3351SOF from LOWPOWER, in a SOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GATE | output | External NMOS gate drive pin, rated −0.3V to +20V to GND. |
| 2 | GND | power_in | Ground; connect all grounds to one uninterrupted ground plane with at least two vias. |
| 3 | CS | input | Current sense input for the inductor current via R7, with OCP threshold 0.33V (IOCP=0.33/R7) and built-in slope compensation, rated −0.3V to +20V. |
| 4 | OVP | input | Over voltage protection sense input connected to an external resistive divider from V+ to GND, with a 2V typical (1.8V to 2.2V) threshold. |
| 5 | FB | input | Regulator feedback input connected to an external sense resistor to set the LED current (ILED=0.21/RFB, VREF 0.21V ±1.5%). |
| 6 | COMP | output | Regulator error amplifier compensation pin, connected to an external Rcomp and Ccomp network (47kΩ and 33nF in the typical circuit). |
| 7 | CTRL | input | Enable and external PWM dimming control input, accepting 100Hz to 1kHz PWM with 1% to 100% duty, logic high 2.6V min, logic low 1V max, 150kΩ internal pull-down. |
| 8 | VIN | power_in | Input supply pin for 8V to 28V operation (absolute maximum 36V), decoupled with a 10μF ceramic capacitor close to the pin. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOP-8-EP |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Supply Voltage | VVLI | 8 | 28 | V | 5 | ||
| Input UVLO Threshold | VUVLO(VTH) | 6 | 7 | 8 | V | VIN Rising | 5 |
| Thermal Shutdown Threshold | TSD | 140 | 160 | 180 | °C | Temperature Rising | 5 |
| Internal Oscillator Frequency | FOSC | 175 | 200 | 225 | kHz | 5 | |
| PWM Threshold Voltage, logic high | VIH | 2.6 | V | Logic High. | 5 | ||
| PWM Threshold Voltage, logic low | VIL | 1 | V | Logic Low | 5 | ||
| Reference Voltage tolerance | VREF | -1.5 | 1.5 | % | Reference voltage at non-inverting input. | 5 | |
| Transconductance of EA | Gm | 80 | 100 | 120 | uA/V | 5 | |
| Output Source Current | ISource | 24 | 30 | 36 | uA | 5 | |
| Output Sink Current | ISink | 48 | 60 | 72 | uA | 5 | |
| Over Voltage Protection threshold | VOVP | 1.8 | 2 | 2.2 | V | Threshold of OVP | 5 |
| VIN Supply Current, Sleep Current | IQ | 310 | 400 | uA | Sleep Current | 5 | |
| VIN Supply Current, Operation Current | IQ | 2.5 | 3 | mA | Operation Current | 5 | |
| VIN to GND | -0.3 | 36 | V | 4 | |||
| GATE, CS, FB, COMP, OVP, CTRL to GND | -0.3 | 20 | V | 4 | |||
| Operating Junction Temperature Range | TJ | -40 | 150 | °C | 4 | ||
| Operation Ambient Temperature Range | -20 | 85 | °C | 4 | |||
| Storage Temperature Range | -65 | 150 | °C | 4 | |||
| Maximum Soldering Temperature | 260 | °C | at leads, 10sec | 4 | |||
| Maximum Junction Temperature | 150 | °C | 4 | ||||
| UVLO Threshold Hysteresis | VUVLO(HYS) | 500 | mV | Falling Hysteresis | 5 | ||
| Thermal Shutdown Hysteresis | ΔTSD | 20 | °C | 5 | |||
| Reference Voltage | VREF | 0.21 | V | Reference voltage at non-inverting input. | 5 | ||
| Open Loop Voltage Gain | Am | 70 | dB | 5 | |||
| Pull Down Resistor | RPull_Low | 150 | kΩ | 5 | |||
| Over Current Protection threshold | VOCP | 330 | mV | duty=90% | 5 | ||
| Fault Trigger Duration | 50 | ms | 5 | ||||
| Connect detect time | Tdet | 1 | ms | 5 | |||
| SCP Threshold, normal operation | VOVP_UV | 0.2 | V | Normal Operation | 5 | ||
| SCP Threshold, system startup | VOVP_UV | 100 | mV | System Startup | 5 | ||
| Thermal resistance, junction-to-ambient SOP-8 | θJA | 112 | °C/W | 4 | |||
| Thermal resistance, junction-to-case SOP-8 | θJC | 39 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
LP3351SOF - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
lp3351sof-etched.step/lp3351sof-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp3351sof.step/lp3351sof.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LOWPOWER datasheet (7 pp, sha256
4bccd9d75f96d0fc, retrieved 2026-11-04, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LP3351SOF
**LOWPOWER** · LED Drivers · SOP-8-EP
LP3351SOF from LOWPOWER, in a SOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GATE | output | External NMOS gate drive pin, rated −0.3V to +20V to GND. |
| 2 | GND | power_in | Ground; connect all grounds to one uninterrupted ground plane with at least two vias. |
| 3 | CS | input | Current sense input for the inductor current via R7, with OCP threshold 0.33V (IOCP=0.33/R7) and built-in slope compensation, rated −0.3V to +20V. |
| 4 | OVP | input | Over voltage protection sense input connected to an external resistive divider from V+ to GND, with a 2V typical (1.8V to 2.2V) threshold. |
| 5 | FB | input | Regulator feedback input connected to an external sense resistor to set the LED current (ILED=0.21/RFB, VREF 0.21V ±1.5%). |
| 6 | COMP | output | Regulator error amplifier compensation pin, connected to an external Rcomp and Ccomp network (47kΩ and 33nF in the typical circuit). |
| 7 | CTRL | input | Enable and external PWM dimming control input, accepting 100Hz to 1kHz PWM with 1% to 100% duty, logic high 2.6V min, logic low 1V max, 150kΩ internal pull-down. |
| 8 | VIN | power_in | Input supply pin for 8V to 28V operation (absolute maximum 36V), decoupled with a 10μF ceramic capacitor close to the pin. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOP-8-EP |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Supply Voltage | VVLI | 8 | | 28 | V | | 5 |
| Input UVLO Threshold | VUVLO(VTH) | 6 | 7 | 8 | V | VIN Rising | 5 |
| Thermal Shutdown Threshold | TSD | 140 | 160 | 180 | °C | Temperature Rising | 5 |
| Internal Oscillator Frequency | FOSC | 175 | 200 | 225 | kHz | | 5 |
| PWM Threshold Voltage, logic high | VIH | 2.6 | | | V | Logic High. | 5 |
| PWM Threshold Voltage, logic low | VIL | | | 1 | V | Logic Low | 5 |
| Reference Voltage tolerance | VREF | -1.5 | | 1.5 | % | Reference voltage at non-inverting input. | 5 |
| Transconductance of EA | Gm | 80 | 100 | 120 | uA/V | | 5 |
| Output Source Current | ISource | 24 | 30 | 36 | uA | | 5 |
| Output Sink Current | ISink | 48 | 60 | 72 | uA | | 5 |
| Over Voltage Protection threshold | VOVP | 1.8 | 2 | 2.2 | V | Threshold of OVP | 5 |
| VIN Supply Current, Sleep Current | IQ | | 310 | 400 | uA | Sleep Current | 5 |
| VIN Supply Current, Operation Current | IQ | | 2.5 | 3 | mA | Operation Current | 5 |
| VIN to GND | | -0.3 | | 36 | V | | 4 |
| GATE, CS, FB, COMP, OVP, CTRL to GND | | -0.3 | | 20 | V | | 4 |
| Operating Junction Temperature Range | TJ | -40 | | 150 | °C | | 4 |
| Operation Ambient Temperature Range | | -20 | | 85 | °C | | 4 |
| Storage Temperature Range | | -65 | | 150 | °C | | 4 |
| Maximum Soldering Temperature | | | | 260 | °C | at leads, 10sec | 4 |
| Maximum Junction Temperature | | | | 150 | °C | | 4 |
| UVLO Threshold Hysteresis | VUVLO(HYS) | | 500 | | mV | Falling Hysteresis | 5 |
| Thermal Shutdown Hysteresis | ΔTSD | | 20 | | °C | | 5 |
| Reference Voltage | VREF | | 0.21 | | V | Reference voltage at non-inverting input. | 5 |
| Open Loop Voltage Gain | Am | | 70 | | dB | | 5 |
| Pull Down Resistor | RPull_Low | | 150 | | kΩ | | 5 |
| Over Current Protection threshold | VOCP | | 330 | | mV | duty=90% | 5 |
| Fault Trigger Duration | | | 50 | | ms | | 5 |
| Connect detect time | Tdet | | 1 | | ms | | 5 |
| SCP Threshold, normal operation | VOVP_UV | | 0.2 | | V | Normal Operation | 5 |
| SCP Threshold, system startup | VOVP_UV | | 100 | | mV | System Startup | 5 |
| Thermal resistance, junction-to-ambient SOP-8 | θJA | | 112 | | °C/W | | 4 |
| Thermal resistance, junction-to-case SOP-8 | θJC | | 39 | | °C/W | | 4 |
## CAD (KiCad official)
- Symbol: `LP3351SOF`
- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`
- 3D model: SOP-8-EP (KiCad packages3D, STEP)
- 3D model files: `lp3351sof-etched.step` / `lp3351sof-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp3351sof.step` / `lp3351sof.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [LOWPOWER datasheet](docs/lp3351sof-datasheet.pdf) (7 pp, sha256 `4bccd9d75f96d0fc`, retrieved 2026-11-04, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lp3351sof-datasheet.pdf)