main
Ray
lp3320b6f: laser-etched CAD + chip hero (factory 2.0.0 backfill)
086d617
LP3320B6F
LOWPOWER · AC-DC Controllers and Regulators · SOT-23-6
LP3320B6F from LOWPOWER, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LX | output | Output switching node. Drain of the internal 1.5A N-MOSFET; connect to the boost inductor and Schottky diode. 400mΩ on-resistance, absolute max 46V to GND. |
| 2 | GND | power_in | Ground pin. Connect to a solid ground plane close to the input/output capacitor returns for low noise coupling. |
| 3 | FB | input | Feedback reference voltage pin. Connect a sense resistor between the WLED cathode string and ground; the LED current is set by ILED = 250mV / R1. Feedback reference is 250mV typical (240-260mV), input bias ~50nA. Absolute max 46V to GND. |
| 4 | EN | input | Chip enable, active high (VIH=1.4V min, VIL=0.4V max). Also serves as a voltage sensing input for over-voltage protection and accepts PWM dimming (100Hz-100kHz, down to 1% duty). High impedance input; pull to GND with 100kΩ resistor when the control signal is floating. |
| 5 | NC | unconnected | No connect. Leave floating or tie to ground; not internally bonded. |
| 6 | VIN | power_in | Supply input voltage pin, 2.5V to 5.5V operating range (absolute max 6.5V). Bypass with a 1uF (10uF recommended) ceramic capacitor to GND close to the pin to reduce input noise. UVLO trips at 2.3V with 0.25V hysteresis. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
LP3320B6FLP3320B6FQVF
CAD (KiCad official)
- Symbol:
LP3320B6F - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
lp3320b6f-etched.step/lp3320b6f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp3320b6f.step/lp3320b6f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: LOWPOWER datasheet (9 pp, sha256
1960d9780c3eb2a8, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LP3320B6F
**LOWPOWER** · AC-DC Controllers and Regulators · SOT-23-6
LP3320B6F from LOWPOWER, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LX | output | Output switching node. Drain of the internal 1.5A N-MOSFET; connect to the boost inductor and Schottky diode. 400mΩ on-resistance, absolute max 46V to GND. |
| 2 | GND | power_in | Ground pin. Connect to a solid ground plane close to the input/output capacitor returns for low noise coupling. |
| 3 | FB | input | Feedback reference voltage pin. Connect a sense resistor between the WLED cathode string and ground; the LED current is set by ILED = 250mV / R1. Feedback reference is 250mV typical (240-260mV), input bias ~50nA. Absolute max 46V to GND. |
| 4 | EN | input | Chip enable, active high (VIH=1.4V min, VIL=0.4V max). Also serves as a voltage sensing input for over-voltage protection and accepts PWM dimming (100Hz-100kHz, down to 1% duty). High impedance input; pull to GND with 100kΩ resistor when the control signal is floating. |
| 5 | NC | unconnected | No connect. Leave floating or tie to ground; not internally bonded. |
| 6 | VIN | power_in | Supply input voltage pin, 2.5V to 5.5V operating range (absolute max 6.5V). Bypass with a 1uF (10uF recommended) ceramic capacitor to GND close to the pin to reduce input noise. UVLO trips at 2.3V with 0.25V hysteresis. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | LOWPOWER |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
## Ordering variants
Same part, different packaging or reel option.
- `LP3320B6F`
- `LP3320B6FQVF`
## CAD (KiCad official)
- Symbol: `LP3320B6F`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `lp3320b6f-etched.step` / `lp3320b6f-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp3320b6f.step` / `lp3320b6f.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [LOWPOWER datasheet](docs/lp3320b6f-datasheet.pdf) (9 pp, sha256 `1960d9780c3eb2a8`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lp3320b6f-datasheet.pdf)