main
Ray lp2998max: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) a94b757
{
  "slug": "lp2998max",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Battery Management, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "pmic",
    "lp2998max"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lp2998max.kicad_sym",
    "lp2998max.kicad_mod",
    "lp2998max.glb",
    "lp2998max.step",
    "lp2998max.lbr",
    "docs/hero.png",
    "docs/lp2998max-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lp2998max-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "LP2998MAX",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "Battery Management",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lp2998max.pdf",
    "parts": {
      "symbol": "lp2998max.kicad_sym",
      "footprint": "lp2998max.kicad_mod",
      "model_3d": "lp2998max-etched.glb",
      "model_3d_plain": "lp2998max.glb",
      "model_3d_step": "lp2998max-etched.step",
      "model_3d_step_plain": "lp2998max.step",
      "lbr": "lp2998max.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground return. Also connect the exposed pad (DDA package) to this net; SOIC-8 (MAX) has no exposed pad."
      },
      {
        "number": "2",
        "name": "SD",
        "type": "input",
        "description": "Active-low shutdown. When pulled low the VTT output tri-states (Suspend-To-RAM); VREF remains active. Has an internal pull-up current so it can be left open or tied to AVIN to enable. Input range 0 to AVIN."
      },
      {
        "number": "3",
        "name": "VSENSE",
        "type": "input",
        "description": "Remote-sense feedback pin for VTT regulation. Connect to VTT at the point of load (middle of the termination bus) for best distributed load regulation; tie directly to VTT at the pin if remote sense is not used. A small 0.1 µF ceramic near the pin helps reject noise pickup."
      },
      {
        "number": "4",
        "name": "VREF",
        "type": "output",
        "description": "Buffered VDDQ/2 reference output for chipset/DIMM Vref inputs. Nominally 1.258 V (DDR-I, VDDQ=2.5 V), 0.910 V (DDR-II, 1.8 V) or 0.758 V (DDR-III, 1.5 V). Output impedance ~2.5 kΩ over ±30 µA; remains active during shutdown / thermal shutdown. Bypass with 0.01-0.1 µF ceramic near the pin."
      },
      {
        "number": "5",
        "name": "VDDQ",
        "type": "input",
        "description": "Sense input for generating the internal VDDQ/2 reference via two internal 50 kΩ resistors (100 kΩ to GND total, always drawing current even in shutdown). Best used as a remote sense tied to the DDR VDDQ rail at the DIMM. Absolute max 6 V, and must be ≤ 2×(AVIN−1) V."
      },
      {
        "number": "6",
        "name": "AVIN",
        "type": "power_in",
        "description": "Analog supply for the internal control circuitry. Recommended operating range 2.2 V to 5.5 V (absolute max 6 V). AVIN must be ≥ PVIN."
      },
      {
        "number": "7",
        "name": "PVIN",
        "type": "power_in",
        "description": "Power input to the VTT output stage. Range 0 V to AVIN; recommended ≤ 3.3 V to keep internal dissipation within the thermal limit. Higher PVIN increases maximum continuous output current by lowering RDSON headroom above VTT."
      },
      {
        "number": "8",
        "name": "VTT",
        "type": "power_out",
        "description": "Regulated DDR termination output at VDDQ/2. Sources and sinks up to ±1.5 A continuous with peak transients to ±3 A; tri-stated during SD-asserted shutdown and thermal shutdown. Requires a bulk output capacitor sized for expected transient step; VTT must not be pulled above AVIN while in shutdown."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:05:50Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "lp2998max.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lp2998max-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "8352f6935062ac7f7eb17e5783b5f5ea26bce0d3f27d5aeee0b06b2f6eb3cf7d",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}