component
LP2988IMX-5.0
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
LP2988IMX-5.0
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOIC-8
LP2988IMX-5.0 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BYPASS | passive | A low-leakage bypass capacitor (NPO/COG ceramic or film recommended) connects here to reduce output noise, and any leakage shifts the regulated output voltage. Bypass pin ESD rating is 500V (LP2988 only). |
| 2 | DELAY | passive | A single external capacitor sets the power-on reset delay, charged by a 2.2 µA source, with a maximum recommended value of 1 µF and no aluminum electrolytics; the Delay pin is ESD rated at 1.5kV. |
| 3 | GROUND | power_in | Ground return pin for the regulator. |
| 4 | INPUT | power_in | Unregulated supply input with an operating range of 2.1V to +16V (survival −0.3V to +16V), requiring an input capacitor of at least 2.2 µF located within 0.5 inch of the pin. |
| 5 | ERROR | output | Open-collector error/reset flag that goes low when the output drops about 5% below nominal and requires an external pull-up resistor; its absolute maximum voltage is −0.3V to +16V. |
| 6 | SHUTDOWN | input | Driving this pin low turns the regulator off and driving it high turns it on, with a slew rate of at least 40 mV/µs required and an absolute maximum of −0.3V to +16V; tie it to INPUT if the feature is not used. |
| 7 | OUTPUT | power_out | Regulated 5.0V output rated for 200 mA continuous and more than 250 mA peak, requiring a minimum of 4.7 µF output capacitance with ESR within the stable range and an absolute maximum of −0.3V to +16V. |
| 8 | SENSE | input | Sense input for the output voltage feedback, rated −0.3V to +6V absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
LP2988IMX-5.0 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
lp2988imx-5-0-etched.step/lp2988imx-5-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp2988imx-5-0.step/lp2988imx-5-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (38 pp, sha256
79f49a22be2bfe07, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LP2988IMX-5.0
**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOIC-8
LP2988IMX-5.0 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BYPASS | passive | A low-leakage bypass capacitor (NPO/COG ceramic or film recommended) connects here to reduce output noise, and any leakage shifts the regulated output voltage. Bypass pin ESD rating is 500V (LP2988 only). |
| 2 | DELAY | passive | A single external capacitor sets the power-on reset delay, charged by a 2.2 µA source, with a maximum recommended value of 1 µF and no aluminum electrolytics; the Delay pin is ESD rated at 1.5kV. |
| 3 | GROUND | power_in | Ground return pin for the regulator. |
| 4 | INPUT | power_in | Unregulated supply input with an operating range of 2.1V to +16V (survival −0.3V to +16V), requiring an input capacitor of at least 2.2 µF located within 0.5 inch of the pin. |
| 5 | ERROR | output | Open-collector error/reset flag that goes low when the output drops about 5% below nominal and requires an external pull-up resistor; its absolute maximum voltage is −0.3V to +16V. |
| 6 | SHUTDOWN | input | Driving this pin low turns the regulator off and driving it high turns it on, with a slew rate of at least 40 mV/µs required and an absolute maximum of −0.3V to +16V; tie it to INPUT if the feature is not used. |
| 7 | OUTPUT | power_out | Regulated 5.0V output rated for 200 mA continuous and more than 250 mA peak, requiring a minimum of 4.7 µF output capacitance with ESR within the stable range and an absolute maximum of −0.3V to +16V. |
| 8 | SENSE | input | Sense input for the output voltage feedback, rated −0.3V to +6V absolute maximum. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `LP2988IMX-5.0`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `lp2988imx-5-0-etched.step` / `lp2988imx-5-0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp2988imx-5-0.step` / `lp2988imx-5-0.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lp2988) (38 pp, sha256 `79f49a22be2bfe07`, retrieved 2026-10-08, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lp2988imx-5-0-datasheet.pdf)