main
Ray Publish 0.1.0 8923118

LP2985AIM5X-4.0

Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5

LP2985AIM5X-4.0 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 IN power_in Input voltage supply, operating range 2.5 V to 16 V (recommended minimum is the greater of 3.1 V or VOUT(max) plus rated dropout voltage).
2 GND power_in Common ground (device substrate).
3 ON/OFF input Logic high enable input, with voltage range 0 V to VIN.
4 BYPASS passive Bypass capacitor connection for low noise operation; a 10-nF capacitor reduces output noise to 30 µVRMS in a 30-kHz bandwidth.
5 OUT power_out Regulated output voltage, up to 150 mA output current.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage tolerance ΔVO -1 1 %VNOM IL = 1 mA 6
Output voltage tolerance ΔVO -1.5 1.5 %VNOM 1 mA ≤ IL ≤ 50 mA 6
Output voltage tolerance ΔVO -2.5 2.5 %VNOM 1 mA ≤ IL ≤ 50 mA, -40°C ≤ TJ ≤ 125°C 6
Output voltage tolerance ΔVO -3.5 3.5 %VNOM 1 mA ≤ IL ≤ 150 mA, -40°C ≤ TJ ≤ 125°C 6
Line regulation ΔVO/ΔVIN 0.007 0.014 %/V VO(NOM)+1 V ≤ VIN ≤ 16 V 6
Line regulation ΔVO/ΔVIN 0.032 %/V VO(NOM)+1 V ≤ VIN ≤ 16 V, -40°C ≤ TJ ≤ 125°C 6
Dropout voltage VIN-VO 1 3 mV IL = 0 mA 6
Dropout voltage VIN-VO 5 mV IL = 0 mA, -40°C ≤ TJ ≤ 125°C 6
Dropout voltage VIN-VO 7 10 mV IL = 1 mA 6
Dropout voltage VIN-VO 15 mV IL = 1 mA, -40°C ≤ TJ ≤ 125°C 6
Dropout voltage VIN-VO 40 60 mV IL = 10 mA 6
Dropout voltage VIN-VO 90 mV IL = 10 mA, -40°C ≤ TJ ≤ 125°C 6
Dropout voltage VIN-VO 120 150 mV IL = 50 mA 6
Dropout voltage VIN-VO 225 mV IL = 50 mA, -40°C ≤ TJ ≤ 125°C 6
Dropout voltage VIN-VO 280 350 mV IL = 150 mA 6
Dropout voltage VIN-VO 575 mV IL = 150 mA, -40°C ≤ TJ ≤ 125°C 6
Ground pin current IGND 65 95 µA IL = 0 mA 7
Ground pin current IGND 125 µA IL = 0 mA, -40°C ≤ TJ ≤ 125°C 7
Ground pin current IGND 75 110 µA IL = 1 mA 7
Ground pin current IGND 170 µA IL = 1 mA, -40°C ≤ TJ ≤ 125°C 7
Ground pin current IGND 120 220 µA IL = 10 mA 7
Ground pin current IGND 400 µA IL = 10 mA, -40°C ≤ TJ ≤ 125°C 7
Ground pin current IGND 350 600 µA IL = 50 mA 7
Ground pin current IGND 1000 µA IL = 50 mA, -40°C ≤ TJ ≤ 125°C 7
Ground pin current IGND 850 1500 µA IL = 150 mA 7
Ground pin current IGND 2500 µA IL = 150 mA, -40°C ≤ TJ ≤ 125°C 7
Ground pin current (shutdown) IGND 0.01 0.8 µA VON/OFF < 0.3 V 7
Ground pin current (shutdown) IGND 0.05 2 µA VON/OFF < 0.15 V, -40°C ≤ TJ ≤ 125°C 7
ON/OFF input voltage high VON/OFF 1.4 V High = O/P ON 7
ON/OFF input voltage high VON/OFF 1.6 V High = O/P ON, -40°C ≤ TJ ≤ 125°C 7
ON/OFF input voltage low VON/OFF 0.55 V Low = O/P OFF 7
ON/OFF input voltage low VON/OFF 0.15 V Low = O/P OFF, -40°C ≤ TJ ≤ 125°C 7
ON/OFF input current ION/OFF 0.01 µA VON/OFF = 0 V 7
ON/OFF input current ION/OFF -2 µA VON/OFF = 0 V, -40°C ≤ TJ ≤ 125°C 7
ON/OFF input current ION/OFF 5 µA VON/OFF = 5 V 7
ON/OFF input current ION/OFF 15 µA VON/OFF = 5 V, -40°C ≤ TJ ≤ 125°C 7
Output noise voltage (RMS) en 30 µV BW = 300 Hz to 50 kHz, COUT = 10 µF, CBYPASS = 10 nF 7
Ripple rejection ΔVO/ΔVIN 45 dB f = 1 kHz, CBYPASS = 10 nF, COUT = 10 µF 7
Short circuit current IO(SC) 400 mA RL = 0 Ω (steady state) 7
Peak output current IO(PK) 350 mA VOUT ≥ VO(NOM) -5% 7
Supply input voltage VIN 3.1 16 V Recommended minimum VIN is the greater of 3.1 V or VOUT(MAX) + rated dropout voltage (maximum) 5
ON/OFF input voltage VON/OFF 0 V max = VIN 5
Output current IOUT 150 mA 5
Operating junction temperature TJ -40 125 °C 5
Operating junction temperature TJ -40 125 °C 5
Input supply voltage (survival) VIN -0.3 16 V 5
Input supply voltage (operating) VIN 2.5 16 V 5
Shutdown input voltage (survival) VON/OFF -0.3 16 V 5
Output voltage (survival) VOUT -0.3 9 V 5
Input-output voltage (survival) -0.3 16 V 5
Storage temperature Tstg -65 150 °C 5
ESD HBM pins 3 and 4 V(ESD) -1000 1000 V Human-body model, pins 3 and 4 5
ESD HBM pins 1, 2 and 5 V(ESD) -2000 2000 V Human-body model, pins 1, 2, and 5 5
Junction-to-ambient thermal resistance RθJA 169 °C/W High K, DBV (SOT-23) 5 pins 6
Junction-to-case (top) thermal resistance RθJC(top) 121.8 °C/W 6
Junction-to-board thermal resistance RθJB 29.5 °C/W 6
Junction-to-top characterization parameter ψJT 16.1 °C/W 6
Junction-to-board characterization parameter ψJB 29 °C/W 6

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper capacitor, and to the LDO ground pin as close as possible to each other, connected by a wide, component-side, copper surface. The use of vias and long traces to create LDO circuit connections is stron 22

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LP2985AIM5X-4.0
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lp2985aim5x-4-0-etched.step / lp2985aim5x-4-0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp2985aim5x-4-0.step / lp2985aim5x-4-0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 4204f42d0934087e, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF