main
Ray
Publish 0.1.0
ecbb746
LP2985A-33DBVTG4
Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5
LP2985A-33DBVTG4 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin; use a capacitor of 1 µF or larger from this pin to ground, and the supply input range for the new chip is 2.5 V to 16 V. |
| 2 | GND | power_in | Ground pin. |
| 3 | ON/OFF | input | Enable pin for the LDO; driving it high enables the device and driving it low disables it, and it must be tied to VIN if unused. |
| 4 | BYPASS | bidirectional | BYPASS pin for low-noise performance; an external capacitor between BYPASS and ground reduces reference voltage noise, with a BYPASS voltage range of -0.3 V to 3 V for the new chip. |
| 5 | VOUT | power_out | Regulator output; use a capacitor of 2.2 µF or larger from this pin to ground, with a nominal output capacitance greater than 1 µF. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage tolerance (A grade) | ∆VOUT | -1 | 1 | % | IL = 1 mA | 5 | |
| Output voltage tolerance (A grade) | ∆VOUT | -1.5 | 1.5 | % | 1 mA ≤ IL ≤ 50 mA | 5 | |
| Output voltage tolerance (A grade) | ∆VOUT | -2.5 | 2.5 | % | 1 mA ≤ IL ≤ 150 mA | 5 | |
| Output voltage tolerance (A grade) | ∆VOUT | -3.5 | 3.5 | % | 1 mA ≤ IL ≤ 150 mA, -40°C ≤ TJ ≤ 125°C | 5 | |
| Line regulation | ΔVOUT(ΔVIN) | 0.007 | 0.014 | %/V | VO(NOM) + 1 V ≤ VIN ≤ 16 V | 5 | |
| Line regulation | ΔVOUT(ΔVIN) | 0.007 | 0.032 | %/V | VO(NOM) + 1 V ≤ VIN ≤ 16 V, -40°C ≤ TJ ≤ 125°C | 5 | |
| Dropout voltage | VIN - VOUT | 1 | 3 | mV | IOUT = 0 mA | 6 | |
| Dropout voltage | VIN - VOUT | 7 | 10 | mV | IOUT = 1 mA | 6 | |
| Dropout voltage | VIN - VOUT | 40 | 60 | mV | IOUT = 10 mA | 6 | |
| Dropout voltage | VIN - VOUT | 120 | 150 | mV | IOUT = 50 mA | 6 | |
| Dropout voltage | VIN - VOUT | 280 | 350 | mV | IOUT = 150 mA | 6 | |
| GND pin current | IGND | 65 | 95 | uA | IOUT = 0 mA | 7 | |
| GND pin current | IGND | 75 | 110 | uA | IOUT = 1 mA | 7 | |
| GND pin current | IGND | 120 | 220 | uA | IOUT = 10 mA | 7 | |
| GND pin current | IGND | 350 | 600 | uA | IOUT = 50 mA | 7 | |
| GND pin current | IGND | 850 | 1200 | uA | IOUT = 150 mA | 7 | |
| Peak output current | IO(PK) | 300 | 350 | mA | VOUT ≥ VO(NOM) -5% (steady state) | 8 | |
| Input supply voltage (legacy chip) | VIN | 2.2 | 16 | V | 4 | ||
| Output voltage (legacy chip) | VOUT | 1.2 | 10 | V | 4 | ||
| Output capacitor (legacy chip) | COUT | 2.2 | 4.7 | μF | 4 | ||
| Input capacitor | CIN | 1 | μF | 4 | |||
| Output current | IOUT | 0 | 150 | mA | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Continuous input voltage range (legacy chip) | VIN | -0.3 | 16 | V | 4 | ||
| Output voltage range (legacy chip) | VOUT | -0.3 | 9 | V | 4 | ||
| ON/OFF pin voltage range (legacy chip) | VON/OFF | -0.3 | 16 | V | 4 | ||
| Operating junction temperature | TJ | -55 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance (legacy chip, DBV) | RθJA | 205.4 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance (legacy chip, DBV) | RθJC(top) | 78.8 | °C/W | 5 | |||
| Junction-to-board thermal resistance (legacy chip, DBV) | RθJB | 46.7 | °C/W | 5 | |||
| Junction-to-top characterization parameter (legacy chip, DBV) | ψJT | 8.3 | °C/W | 5 | |||
| Junction-to-board characterization parameter (legacy chip, DBV) | ψJB | 46.3 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
LP2985A-33DBVTG4 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lp2985a-33dbvtg4-etched.step/lp2985a-33dbvtg4-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp2985a-33dbvtg4.step/lp2985a-33dbvtg4.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
8fb4e2deddf601d1, retrieved 2026-10-28, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LP2985A-33DBVTG4
**Texas Instruments** · Linear Voltage Regulators (LDO) · SOT-23-5
LP2985A-33DBVTG4 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin; use a capacitor of 1 µF or larger from this pin to ground, and the supply input range for the new chip is 2.5 V to 16 V. |
| 2 | GND | power_in | Ground pin. |
| 3 | ON/OFF | input | Enable pin for the LDO; driving it high enables the device and driving it low disables it, and it must be tied to VIN if unused. |
| 4 | BYPASS | bidirectional | BYPASS pin for low-noise performance; an external capacitor between BYPASS and ground reduces reference voltage noise, with a BYPASS voltage range of -0.3 V to 3 V for the new chip. |
| 5 | VOUT | power_out | Regulator output; use a capacitor of 2.2 µF or larger from this pin to ground, with a nominal output capacitance greater than 1 µF. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage tolerance (A grade) | ∆VOUT | -1 | | 1 | % | IL = 1 mA | 5 |
| Output voltage tolerance (A grade) | ∆VOUT | -1.5 | | 1.5 | % | 1 mA ≤ IL ≤ 50 mA | 5 |
| Output voltage tolerance (A grade) | ∆VOUT | -2.5 | | 2.5 | % | 1 mA ≤ IL ≤ 150 mA | 5 |
| Output voltage tolerance (A grade) | ∆VOUT | -3.5 | | 3.5 | % | 1 mA ≤ IL ≤ 150 mA, -40°C ≤ TJ ≤ 125°C | 5 |
| Line regulation | ΔVOUT(ΔVIN) | | 0.007 | 0.014 | %/V | VO(NOM) + 1 V ≤ VIN ≤ 16 V | 5 |
| Line regulation | ΔVOUT(ΔVIN) | | 0.007 | 0.032 | %/V | VO(NOM) + 1 V ≤ VIN ≤ 16 V, -40°C ≤ TJ ≤ 125°C | 5 |
| Dropout voltage | VIN - VOUT | | 1 | 3 | mV | IOUT = 0 mA | 6 |
| Dropout voltage | VIN - VOUT | | 7 | 10 | mV | IOUT = 1 mA | 6 |
| Dropout voltage | VIN - VOUT | | 40 | 60 | mV | IOUT = 10 mA | 6 |
| Dropout voltage | VIN - VOUT | | 120 | 150 | mV | IOUT = 50 mA | 6 |
| Dropout voltage | VIN - VOUT | | 280 | 350 | mV | IOUT = 150 mA | 6 |
| GND pin current | IGND | | 65 | 95 | uA | IOUT = 0 mA | 7 |
| GND pin current | IGND | | 75 | 110 | uA | IOUT = 1 mA | 7 |
| GND pin current | IGND | | 120 | 220 | uA | IOUT = 10 mA | 7 |
| GND pin current | IGND | | 350 | 600 | uA | IOUT = 50 mA | 7 |
| GND pin current | IGND | | 850 | 1200 | uA | IOUT = 150 mA | 7 |
| Peak output current | IO(PK) | 300 | | 350 | mA | VOUT ≥ VO(NOM) -5% (steady state) | 8 |
| Input supply voltage (legacy chip) | VIN | 2.2 | | 16 | V | | 4 |
| Output voltage (legacy chip) | VOUT | 1.2 | | 10 | V | | 4 |
| Output capacitor (legacy chip) | COUT | 2.2 | | 4.7 | μF | | 4 |
| Input capacitor | CIN | 1 | | | μF | | 4 |
| Output current | IOUT | 0 | | 150 | mA | | 4 |
| Operating junction temperature | TJ | -40 | | 125 | °C | | 4 |
| Continuous input voltage range (legacy chip) | VIN | -0.3 | | 16 | V | | 4 |
| Output voltage range (legacy chip) | VOUT | -0.3 | | 9 | V | | 4 |
| ON/OFF pin voltage range (legacy chip) | VON/OFF | -0.3 | | 16 | V | | 4 |
| Operating junction temperature | TJ | -55 | | 150 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Junction-to-ambient thermal resistance (legacy chip, DBV) | RθJA | | 205.4 | | °C/W | | 5 |
| Junction-to-case (top) thermal resistance (legacy chip, DBV) | RθJC(top) | | 78.8 | | °C/W | | 5 |
| Junction-to-board thermal resistance (legacy chip, DBV) | RθJB | | 46.7 | | °C/W | | 5 |
| Junction-to-top characterization parameter (legacy chip, DBV) | ψJT | | 8.3 | | °C/W | | 5 |
| Junction-to-board characterization parameter (legacy chip, DBV) | ψJB | | 46.3 | | °C/W | | 5 |
## CAD (KiCad official)
- Symbol: `LP2985A-33DBVTG4`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `lp2985a-33dbvtg4-etched.step` / `lp2985a-33dbvtg4-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp2985a-33dbvtg4.step` / `lp2985a-33dbvtg4.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lp2985a-33dbvtg4.pdf) (41 pp, sha256 `8fb4e2deddf601d1`, retrieved 2026-10-28, tier: manufacturer)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lp2985a-33dbvtg4-datasheet.pdf)