main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lp2980im5x-5-0: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lp2980im5x-5-0: viewers · Ray
lp2980im5x-5-0-etched.fit.json lp2980im5x-5-0: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lp2980im5x-5-0-etched.glb lp2980im5x-5-0: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lp2980im5x-5-0-etched.step lp2980im5x-5-0: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lp2980im5x-5-0-hero.glb Publish 0.2.1 · Ray
lp2980im5x-5-0-hero.overlay.json Publish 0.2.1 · Ray
lp2980im5x-5-0.glb Publish 0.1.0 · Ray
lp2980im5x-5-0.kicad_mod Publish 0.1.0 · Ray
lp2980im5x-5-0.kicad_sym Publish 0.1.0 · Ray
lp2980im5x-5-0.lbr Publish 0.1.0 · Ray
lp2980im5x-5-0.step Publish 0.1.0 · Ray
package.json Publish 0.2.1 · Ray
page.json Publish 0.2.1 · Ray
README.md lp2980im5x-5-0: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

LP2980IM5X-5.0

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

LP2980IM5X-5.0 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input voltage supply pin. Operating range 2.1 V to 16 V; absolute maximum -0.3 V to 16 V. Bypass with a 1-uF capacitor to GND.
2 GND power_in Common ground (device substrate). Ground pin current typically 375 uA at 50 mA load and 80 uA at 1 mA load.
3 ON/OFF input Logic-high enable input. Regulator ON when V(ON/OFF) >= 1.6 V; OFF (sleep mode, <1 uA Iq) when V(ON/OFF) <= 0.18 V. Absolute maximum -0.3 V to 16 V. Must be actively driven; do not float.
4 N/C unconnected DO NOT CONNECT. Reserved for post-packaging test and calibration of VOUT accuracy. Must be left floating; do not connect to any potential or to ground. Continuity/pin-testing may activate trim circuitry and force VOUT out of tolerance.
5 OUT power_out Regulated 5.0 V output. Ensured 50 mA output current with 150 mA typical peak; initial output voltage tolerance +/-0.5% (A grade). Requires a minimum 1-uF (2.2 uF recommended) output capacitor for stability.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category PMIC
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • LP2980IM5X-5.0
  • LP2980IM5X-5.0IM5-5.0

CAD (KiCad official)

  • Symbol: LP2980IM5X-5.0
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: lp2980im5x-5-0-etched.step / lp2980im5x-5-0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp2980im5x-5-0.step / lp2980im5x-5-0.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
lp2980im5x-5-0.step 85 KB You want the bare part, or you mark your own boards.
lp2980im5x-5-0-etched.step 2.4 MB You want the part with LP2980IM5X-5.0 already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 595 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (38 pp, sha256 289f50688393a5c4, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF