main
History Download
Ray Publish 0.1.0 fd3ae54

LP2980IM5-3.0

Texas Instruments · Linear Voltage Regulators (LDO) · SOT-23-5

LP2980IM5-3.0 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input voltage; the recommended input supply range is 2.1 V to 16 V.
2 GND power_in Common ground (device substrate) for the regulator.
3 ON/OFF input Logic high enable input; the shutdown input voltage range is 0 V to VIN, and pulling it below 0.18 V puts the part in sleep mode with less than 1 µA quiescent current.
4 N/C unconnected Do not connect; reserved for post-packaging test and calibration of the VOUT accuracy and must be left floating with no connection to any potential.
5 OUT power_out Regulated output voltage; the output absolute maximum rating is -0.3 V to 9 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Power Supply Chip
Pins 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper capacitors, and to the LDO ground pin as close as possible to each other, connected by a wide, component-side, copper surface. The use of vias and long traces to create LDO circuit connections is stro 23

CAD (KiCad official)

  • Symbol: LP2980IM5-3.0
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: lp2980im5-3-0-etched.step / lp2980im5-3-0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp2980im5-3-0.step / lp2980im5-3-0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (35 pp, sha256 95426ce48328baff, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF