component
LP2980AIM5X-3.0
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
LP2980AIM5X-3.0
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
LP2980AIM5X-3.0 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | input | Input supply pin; use a capacitor of 1µF or larger from this pin to ground. |
| 2 | GND | power_in | Common ground (device substrate). |
| 3 | ON/OFF | input | Enable pin: driving high enables the LDO and driving low disables it, with thresholds given in the Electrical Characteristics table; tie to VIN if unused. |
| 4 | N/C | unconnected | Do not connect; reserved for factory VOUT trim, must be left floating and not tied to any potential or ground, and continuity or high-voltage/high-current testing can activate the trim circuitry and move VOUT out of tolerance. |
| 5 | OUT | output | Regulator output; use a capacitor of 2.2µF or larger from this pin to ground, with nominal output capacitance above 1µF and effective capacitance above 1µF after 50% derating. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
LP2980AIM5X-3.0 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lp2980aim5x-3-0-etched.step/lp2980aim5x-3-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp2980aim5x-3-0.step/lp2980aim5x-3-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
134be8e046145f40, retrieved 2026-10-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LP2980AIM5X-3.0
**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
LP2980AIM5X-3.0 from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | input | Input supply pin; use a capacitor of 1µF or larger from this pin to ground. |
| 2 | GND | power_in | Common ground (device substrate). |
| 3 | ON/OFF | input | Enable pin: driving high enables the LDO and driving low disables it, with thresholds given in the Electrical Characteristics table; tie to VIN if unused. |
| 4 | N/C | unconnected | Do not connect; reserved for factory VOUT trim, must be left floating and not tied to any potential or ground, and continuity or high-voltage/high-current testing can activate the trim circuitry and move VOUT out of tolerance. |
| 5 | OUT | output | Regulator output; use a capacitor of 2.2µF or larger from this pin to ground, with nominal output capacitance above 1µF and effective capacitance above 1µF after 50% derating. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## CAD (KiCad official)
- Symbol: `LP2980AIM5X-3.0`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `lp2980aim5x-3-0-etched.step` / `lp2980aim5x-3-0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lp2980aim5x-3-0.step` / `lp2980aim5x-3-0.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lp2980-n) (39 pp, sha256 `134be8e046145f40`, retrieved 2026-10-11, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lp2980aim5x-3-0-datasheet.pdf)